Jump to content

Recommended Posts

Posted
6 hours ago, Nitrousbird said:

I find the wireless charger pretty pointless.  Yes, it works in my '18, charging my wife's S7 Edge and my G7 ThinQ.

 

But it's pointless, since to use Android Auto you have to hard wire.  If I'm pulling my phone out of my pocket, I'm just going to plug it in there.  OEM's aren't offering wireless Android auto quite yet (it is available in Android, so in 2-3 years Apple CarPlay will have it and Apple Fanboi's will tell you that Apple invented it).  Once OEM's adopt the wireless Android Auto, then the wireless charging makes a lot of sense.

 

I had it in my last truck as a wireless charging cell phone mount, but that was so I could see the phone as it didn't have Android Auto.  That made sense - in this truck, pointless.  

I have to agree to a point.  My '18 came with it and I guess it's nice to have but it's soooooo slow.  Yeah, when I'm out running errands, I just set the phone down on the pad between stops and it gets a little charge which is nice but nothing that is noticeable really.  For longer trips, you will get a decent charge but I agree that at that point, you might as well just plug it in.  I only use Android Auto on longer trips so again, the wireless pad isn't really used then.

 

I guess my point to others trying to add  wireless charging is, depending on the cost, it might not really be worth it.  Maybe find a nice phone mount with integrated charger or something like that.  If you just want a cool mod, go for it.  Just don't expect charging miracles out of it.  

 

Now, if someone can integrate a fast wireless charger, that would definitely be worth the investment to add this to a truck that didn't have it.  I'd also be interested in adding a a second charging pad for the wife but I don't know where I'd even put it.  Maybe in the upper glove box?

Posted (edited)

Why are people complaining about technology that their truck never included in the first place? I mean it’s not really GMs fault your truck can’t instantly charge your phone while it’s in your pocket and do wireless android auto or CarPlay simultaneously. This is literally emerging technology and GM builds vehicles. They don’t make cell phones. 

Edited by KYDMAX
Posted
6 minutes ago, KYDMAX said:

Why are people complaining about technology that their truck never included in the first place? I mean it’s not really GMs fault your truck can’t instantly charge your phone while it’s in your pocket and do wireless android auto or CarPlay simultaneously. This is literally emerging technology and GM builds vehicles. They don’t make cell phones. 

Are you replying to me?  I'm not complaining about anything.  Just trying to let folks know that wireless charging that I have in my '18 is "meh" at best.  You are quite correct, expecting GM to allow you to charge your phone in your pocket is silly.  In fact, suggesting it is quite asinine. As is the idea of a mobile device performing Android Auto and Apple Carplay simultaneously.   However, wireless Android Auto or Carplay is a reality and could be implemented.  I didn't ask GM to make a phone for me, just hoping someone can find a way to get my antiquated tech up to today's technology.

Posted
3 hours ago, colonel00 said:

I have to agree to a point.  My '18 came with it and I guess it's nice to have but it's soooooo slow.  Yeah, when I'm out running errands, I just set the phone down on the pad between stops and it gets a little charge which is nice but nothing that is noticeable really.  For longer trips, you will get a decent charge but I agree that at that point, you might as well just plug it in.  I only use Android Auto on longer trips so again, the wireless pad isn't really used then.

 

I guess my point to others trying to add  wireless charging is, depending on the cost, it might not really be worth it.  Maybe find a nice phone mount with integrated charger or something like that.  If you just want a cool mod, go for it.  Just don't expect charging miracles out of it.  

 

Now, if someone can integrate a fast wireless charger, that would definitely be worth the investment to add this to a truck that didn't have it.  I'd also be interested in adding a a second charging pad for the wife but I don't know where I'd even put it.  Maybe in the upper glove box?

I didn't realize it was even a slow charger - even worse.  That's REALLY pointless then as those take forever to charge.  Goes back to if you are already pulling the phone out might as well plug it in and get the advantages of Android Auto.  I have a 1ft USB-C cable attached to the port 24x7 just to hook up the phone to the truck.  

 

You can find phone mounts with fast wireless charging; had one in my Escalade EXT and it worked well.  But I needed it to see my phone for Waze, Sirius and Spotify - all things that are unnecessary now with Android Auto.

Posted

There is plenty of stuff I wish my truck didnt have in order to allow a lower price. Certainly it all sounded grand when it was designed but the delay from design to market makes alot of the technology just excess weight and money. 

 

For starters:

 

4GLTE

Factory Nav 

Wireless charging 

Onstar

 

Not sure what the price of those systems are but I would prefer to live without them. If I thought for a few minutes I would come up with plenty more. 

Posted

You have to plug in to use Android auto or car play, so I find my wireless charging pointless.  That and the fact my phone doesn't even fit.  I've read that if Android auto was wireless it would drain the battery rather quickly and you'd want to keep it plugged into a charger so your phone doesn't die. 

 

The plug in charging however, is pretty fast on my phone. 

  • 2 weeks later...
Posted
On 11/30/2018 at 6:36 PM, pgamboa said:


It doesn’t have the latest module.. so I’m guessing 2017. When I get time, I’ll throw the 2018 module in it and test it. I use a cable myself and a mount, so having wireless charging are for those times I just throw my phone on the lid.


Sent from my iPhone using Tapatalk

Did you make any progress on console lid swap? I’ve seen a few on eBay, just wondering if 2018 my 2018 module will fit the Escalade lid?

thanks Sir!

  • Like 1
Posted
Did you make any progress on console lid swap? I’ve seen a few on eBay, just wondering if 2018 my 2018 module will fit the Escalade lid?
thanks Sir!

Ah, yes I did. Lol. While the charging module studs and the lid mounting are the same, the latch mechanisms are different. I was able to mount it on mine but it wouldn’t latch. :(. I ended up giving it to a friend of mine (Tinkering fox) to see if he could mess with it. I just don’t have the time to mess with it.


Sent from my iPhone using Tapatalk
  • 2 weeks later...
Posted

Hey guys,

So i have combed thru all 35 pages of this thread and just about did as much research as i could. i feel i have an unique issue and maybe someone can shine some light in my direction.. so I have a 2015 GMC Yukon Denali. did the magnet removal mod to my wireless charging unit and it actually worked great (every day) but before doing this i had ordered the 2018 unit with adapter harness since it was the for sure fix, i got it and installed it and bam it worked right away, and thats it the next day it never worked again, about a week later i swap back my old charging unit and it does not work either. I have looked at every single fuse in the entire truck and nothing is blown.. anything special that i missed?

Posted

Do you have a different phone case or something with your phone that changed, do you have another one you could try?  Try testing the wires to see if you have power to the module?  One of the wires pulled out of the plug not making a positive connection? 

Posted

Well found my problem today.. decide to check the pins.. then said to myself oh wait I did and the factory plug was always mint, but decided to just feel up on the long harness until I found a dead spot almost all the way down where the harness submerged into the center console and said no way... and yep wires were cut.. it had worked before so I guess opening and closing the arm rest over time caused a kink spot but there was no sign of it on the outer wiring wrap.. go figure..

20181222_121257.jpg

  • Like 1
Posted
Well found my problem today.. decide to check the pins.. then said to myself oh wait I did and the factory plug was always mint, but decided to just feel up on the long harness until I found a dead spot almost all the way down where the harness submerged into the center console and said no way... and yep wires were cut.. it had worked before so I guess opening and closing the arm rest over time caused a kink spot but there was no sign of it on the outer wiring wrap.. go figure..
20181222_121257.thumb.jpg.4842fdc291c887d1f6fb2e0010a5b9b3.jpg

Ugh.... that would be it. On the bottom side cover, there is a loop/cutout in the hinge where this part of the harness goes through. Suppose to help with this issue.


Sent from my iPhone using Tapatalk
Posted
2 minutes ago, pgamboa said:


Ugh.... that would be it. On the bottom side cover, there is a loop/cutout in the hinge where this part of the harness goes through. Suppose to help with this issue.


Sent from my iPhone using Tapatalk

You have to remove the entire armrest to get to it or it can be accessed from the top, I see that hole on the hinge.. I can just zip tie the harness there so it's more secure and then essentially after that it should just free hang, nothing else should pinch it unless closing the lid pinches it..

 

So word of advice to everyone that this doesnt work for at all.. check the wiring voltage lol or if its intermittent then check for a break in the harness!

  • 2 weeks later...
Posted

I installed the new module and the adaptive for the wired and still get nothing for charging my iPhone X, while changing everything out it blew my fuse for rear and sun roof controls, replaced the fuse still nothing with the charging pad 

Posted

You probably pinched the wiring in the harness and shorted it. That is what happened to mine. I was able to fix the harness and route in better after the repair. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,889
    Total Members
    8,960
    Most Online
    smandy
    Newest Member
    smandy
    Joined
  • Who's Online   2 Members, 0 Anonymous, 484 Guests (See full list)


  • Latest Articles

  • Posts

    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • from another thread   Update...although the truck sometimes seems to idle weird and the transmission shift a little weird, I've driven about 7,000  miles and no issues.   However, the way GM has handled my rental reimbursement, the situation when my truck quit, and the recall in general has led me to this point...I have driven a GM vehicle for the past 46 years and unless I buy a C3 Corvette, this is the last GM vehicle I will ever own. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...