What Have You Done With Your T1 Today ?????

GA_RST · May 7, 2020

These are the turn signals I used:

OXILAM 7440 LED Bulbs Amber Yellow 2800LM for Turn Signal Lights with Build-in Load Resistor CANBUS Error Free T20 7440NA 7441 W21W WY21W Blinker Bulb Replacement (2PCS) https://www.amazon.com/dp/B07Q8RZRZV/ref=cm_sw_r_cp_api_i_eXoGEbV017PTK

Used Sylvania ZEVO reverse and tag lamps

https://www.oreillyauto.com/detail/b/zevo-5029/lighting---electrical-16777/bulb-flasher-fuse-16457/brake-light-bulb-11532/bf4e14130f2d/sylvania-921-high-performance-white-zevo-led-mini-bulb-pack-of-2/921ledbp2/4743398

https://www.oreillyauto.com/detail/b/zevo-5029/lighting---electrical-16777/bulb-flasher-fuse-16457/turn-signal-light-bulb-11535/31c9fb58436c/sylvania-2825-high-performance-white-zevo-led-mini-bulb-pack-of-2/2825ledbp2/6079597

Dinozero · May 7, 2020

I got my windows tinted today. Front two 20% with a strip.

Gerstein1989 · May 7, 2020

On 4/26/2020 at 8:15 PM, truck_newbie said:

Black denali grille installed with fog light bezel painted black. I wanted a black AT4 grille but there doesn't seem to be one available that supports the front camera. Anyways, i think it looks sharp.

Deadpool would approve of the theme .

Hey did you have to get the fog light bezel painted or did you buy it in gloss black

truck_newbie · May 8, 2020

17 hours ago, Gerstein1989 said:

Hey did you have to get the fog light bezel painted or did you buy it in gloss black

Got it painted gloss black. I was going to wrap it but the wrap experienced some shipping delays so ended up getting it painted. At the time of purchase, there weren't any aftermarket bezels available. Believe me, I already checked. If you don't need it done immediately, aftermarket bezels will probably show up at some point as they did for the grille.

loud_pipes · May 8, 2020

Bed rail plugs and AT4 black inlay decals

Sent from my iPhone using Tapatalk Pro

Gerstein1989 · May 8, 2020

4 hours ago, truck_newbie said:

Got it painted gloss black. I was going to wrap it but the wrap experienced some shipping delays so ended up getting it painted. At the time of purchase, there weren't any aftermarket bezels available. Believe me, I already checked. If you don't need it done immediately, aftermarket bezels will probably show up at some point as they did for the grille.

thanks. with the new grill has the angle of the camera changed at all. I noticed his higher up as opposed to the factory at4 grill

snowman44 · May 8, 2020

Where did you get those bed rail plugs?

truck_newbie · May 8, 2020

1 hour ago, Gerstein1989 said:

thanks. with the new grill has the angle of the camera changed at all. I noticed his higher up as opposed to the factory at4 grill

I haven't noticed any camera issues but i haven't really paid close attention to it. It seems to work fine, no distortion observed.

loud_pipes · May 8, 2020

Where did you get those bed rail plugs?

On Amazon

ES ENGINEERED BY SCHILDMEIER Stake Pocket Cover Set for 2019-2020 Silverado/Sierra (Set of 2) https://www.amazon.com/dp/B07KVKN9PZ/ref=cm_sw_r_cp_api_i_R8ETEb9TZZ5WC

Sent from my iPhone using Tapatalk Pro

Trza · May 9, 2020

Just got the shoes put on.

20x9 +1 offset. Wanted to stay conservative this time around. Had 10 wides with a -24 on 35's on my last truck and it was getting a bit annoying. Currently running the stock tires to get a bit of use out of them. I'll get some new rubber in the fall before the winter.

Parb · May 9, 2020

1 hour ago, Trza said:

Just got the shoes put on.

20x9 +1 offset. Wanted to stay conservative this time around. Had 10 wides with a -24 on 35's on my last truck and it was getting a bit annoying. Currently running the stock tires to get a bit of use out of them. I'll get some new rubber in the fall before the winter.

Very nice. I’m looking at that exact wheel but don’t know if I should go +1 or +20. Can you take down the side shots to see how far outside fender? Thanks.

Trza · May 9, 2020

1 hour ago, Parb said:

Very nice. I’m looking at that exact wheel but don’t know if I should go +1 or +20. Can you take down the side shots to see how far outside fender? Thanks.

Here you go. I would do the +1, there wouldn't be much of a difference from stock with the +20. There's a ton of room from the tire to the upper control arm. I could have easily went with the 20x10...but the offsets are a bit much in that width.

Edited May 9, 2020 by Trza

Parb · May 9, 2020

1 hour ago, Trza said:

Here you go. I would do the +1, there wouldn't be much of a difference from stock with the +20. There's a ton of room from the tire to the upper control arm. I could have easily went with the 20x10...but the offsets are a bit much in that width.

Very nice. Thanks. I think that would be perfect for me with some 33x11.50x20 ridge grapplers.

Trza · May 9, 2020

26 minutes ago, Parb said:

Very nice. Thanks. I think that would be perfect for me with some 33x11.50x20 ridge grapplers.

Are you leveled? Lifted? I've got a 2 inch level. Let me know how the truck rides with the Nitto's in that size. I am contemplating sizing up, but don't want to lose the comfortable ride.