Jump to content

Recommended Posts

Posted
Man, that is disappointing. I had mine repairEd weeks Ago and haven’t had any issues through heavy rains and multiple car washes.
 
like I was saying earlier, a lot of this is due to incompetence of the service department. Mine has been great so far. I went in with the info from this thread and told them exactly what I wanted done. They brought in an outside professional and had the warranty work done right with no questions asked. I’d try a different dealership. Make sure you research their service department thoroughly!
Mine was good for 6 months, and the rear window was installed by Safelite... My bet is yours will fail again. I think there is something fundamental wrong with the truck or window assembly, and I'm worried I'll be chasing this issue for the life of the truck...

Sent from my SM-G975U using Tapatalk

  • Like 2
Posted
3 hours ago, Jamie73 said:

Another update! While I do like my dealership and the service manager my confidnce with them is starting to plummet. Picked up my truck Friday afternoon. Not feeling real confident because nothing was done to fix the issue. We had some nice weather yesterday and my truck was dirty from sitting at the dealership so I decided to give it a wash. You guessed it,  just an easy hand wash with a normal water hose, not more water on the  window or no less. And I have a leaking rear window. I stuffed a blue heavy duty paper towel into the sliding window track, this is the area I found water last time and told the dealership that. After washing a drying the truck I checked the paper towel and it was soaked. By looking at those pictures of the soaked paper towel, can you imagine how much water would enter the cab if the truck was sitting the the rain for a few days. Back to the shop tomorrow. I am quickly moving toward the Alabama Lemon Law requirements.

IMG_2787.JPG

IMG_2792.JPG

What model new window did you get? I cannot remember.  

Posted
Mine was good for 6 months, and the rear window was installed by Safelite... My bet is yours will fail again. I think there is something fundamental wrong with the truck or window assembly, and I'm worried I'll be chasing this issue for the life of the truck...

Sent from my SM-G975U using Tapatalk



I agree, the fundamental issue is the overall design. I took our dogs for a walk last night and looked at every single rear window on the vehicles on our street and they are all flush mount. The giant gap at the top of the window with just seam sealer over it with a spoiler dripping down on it is just absurd. Any small void in the sealer introduces a leak and we all know water can find its way into any little space.


Sent from my iPhone using Tapatalk
Posted
1 hour ago, Centrebaseball said:

What model new window did you get? I cannot remember.  

FUYAO E4 Installed my a company with a great reputation in my town.

Posted
2 hours ago, Jamie73 said:

FUYAO E4 Installed my a company with a great reputation in my town.

Interesting.  And not good that a replacement window failed.  That makes two replacement windows that have failed on the forum if I’m remembering correctly.  

Posted
On 2/22/2020 at 8:53 AM, UGADawgs said:

So I shared this issue in the comments of TFL's recent YouTube video today comparing their new 19 TB to a 6.2 RST asking if they were aware of this problem with a link to this thread and random some dude called me a troll for posting about this issue. ?

Typical fan boy behavior.

Posted

With all the talk about this potentially deadly multidrug-resistant fungus, no way in **** would I drive one of these leaky vehicles without the windows down and the blower on high... yuk!

Posted

I bet anything the 2021''s will have the same issue knowing how this company operates today. Why hasn't a common sense fix at least temporarily been to replace the sliders with a regular non slider. My previous truck had a slider and my current one doesn't and i can't think of a single time i have missed having one. Certainly not having a slider is better then having one with a moldy musty smelling truck.

  • Like 1
Posted
I bet anything the 2021''s will have the same issue knowing how this company operates today. Why hasn't a common sense fix at least temporarily been to replace the sliders with a regular non slider. My previous truck had a slider and my current one doesn't and i can't think of a single time i have missed having one. Certainly not having a slider is better then having one with a moldy musty smelling truck.
So is the issue completely isolated to those of us with the rear sliding glass?

Sent from my SM-G975U using Tapatalk

Posted
Just now, 19TrailBoss said:

So is the issue completely isolated to those of us with the rear sliding glass?

Sent from my SM-G975U using Tapatalk
 

It seems to be trending that way, not sure if there has been any non slider people in this post??

Posted

A simple redesign of the spoiler would eliminate water getting into the cab completely as long as the spoiler bolts are sealed up broken plastic frame or not.  I have pictures of mine that have been sealed and I can assure you the spoiler won’t leak through a bolt hole. 

Posted

I don't understand. If you are assaying the spoiler is the issue (at least most of the time) while does this issue seem to occurring only on trucks with the sliding rear window. What is different on these trucks other than the rear window?

  • Like 1
Posted

I’m wondering if we can get someone to design a little bracket, something thicker than vinyl that would be able to go between the gap of the window and spoiler and direct water out. Something like the attached drawing.


cc393aa9c11b9b9c801cec8ff63015d4.jpg


Sent from my iPhone using Tapatalk

Posted

You know that is logical. You wouldn't trim the outside windows of your house without a flashing. Why isn't there at least a drip edge on the spoiler?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,958
    Total Members
    8,960
    Most Online
    B07
    Newest Member
    B07
    Joined
  • Who's Online   0 Members, 0 Anonymous, 804 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Missing pieces of the Assembly   Detergency vs Solvency   Not the same thing. Detergency is the mechanism that surrounds solid particulates preventing amalgamation. Usually accompanied by a Dispersant whose job it is to keep those encapsulated particles in Suspension. Solvency keeps things that can be dissolved in solution.    Salt is a solid that can be dissolved. Pepper is a solid that cannot be dissolved. A detergent/dispersant is effective on pepper but a solvent is more effective on salt. As long as the solids remain in either state, dissolved or dispersed then they can be be removed with the oil upon change.    How many wranglers does it take to herd cats? Depends on how many cats your herding. How much sponge does it take to soak up water? How much water is there to soak up? Point is most oil blends start with some herding ability and next to zero sponge and recently even fewer wranglers are being sent to do the same job.    So you start with a dozen cowboys and zero cows but at the drive progresses you pick up cows along the way, but not cowboys. At some point you have more cows that the wranglers can handle and some leave the herd. Deposits. And the API has an acceptable number of cows they are willing to let loose. In the ideal world zero is the right number for he rancher but to the butcher....a few lost is fine. This cow is beat to death. Let's move on....   Solvency isn't something oils on the Walmart shelf care about AT ALL. Problem is, you motor does. Fuels driven varnish sticks rings and only a solvent can keep them in check. The bet is that the solids driven portion that plug the expander rings and the oil drain backs and VVT screens and AFM screens will be an issue long before varnish is. Not that it wont be but if they market well enough the consumer can be kept ignorant enough to either believe it is "normal" (A quart in 1 or 2K is normal) OR is kept at bay longer than the first owner is likely to hang on to the unit. Solvency cost money.    Now the OEM's have John Q. Public buffaloed into the belief that the number cows accumulated along the trail is a known and predictable CONSTANT. It isn't. Nor is the rate at which they crossed paths with them. Only the number of wrangles is constant. Or was. Each new generation of oil sees fewer and fewer of them.    So what happens when the number of cowboys is lower (lower TBN) with each seasons trail but the trial is longer (OCI) and the number of cows along that trail continues increase? (Conditions that promote deposits).    For awhile the blenders were on to something. Better bases are harder to degrade (fewer cows) but that was overtaken by a longer trail (OCI) and improved breeding (More cows) while continuing to reduce the cowboy staffing levels (TBN/Aniline #).    Marketing has been successful. We've fired most of the staff, cows breed line bunnies, the trail is ten times longer and we've convinced the boss his ranch is in better shape that it ever was.    That kids is just the cleaning side. The side few pay attention to.     
    • Mann+Hummel since 1941 per their web site 
    • Looking for this part for my truck. They don't sell just that one piece and to get it you have to pay over $100 even used for the whole air tube. The piece the hose clamp snaps into that is held on by the screw and nut. If anyone has access to one please let me know.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...