Jump to content

Recommended Posts

Posted

First time towing with the new rig.  600 miles round trip to Niagara Falls, ON for Memorial Day weekend.  The 6.2 had plenty of juice and I'm quite pleased overall.  Coming from a 2500 Duramax I was concerned.  The camper is about 7000 lbs and 33'.  We used a Husky Centerline TS weight distribution hitch.  We averaged 10.5 mpg on the way there with 93 octane gas.  The highest octane I could find in Ontario was 91 so that's what we used on the way home and we averaged about 10.0 mpg.  Those were the computer numbers but they were higher than I expected.  I didn't hand calculate though I may next time just to make sure they're accurate.

 

All things considered, we're very happy with the downsize. 

IMG_0699.jpeg

  • Like 1
Posted

Hahaha got a pick in front of a tim hortons. I know nothing about Canada in general but I know about Timmy's.

Sent from my ONEPLUS A6013 using Tapatalk

Posted

Not much for Blanco to tow. 

 

Going from Bay Area,CA to Seattle, WA. Towing a 6x12 uhaul trailer. Empty going up. Full going back. 

 

I will be documenting the mpg for all. 

3C83DB99-30D4-4AFF-8E2B-5EEF89607212.jpeg

  • Like 1
Posted (edited)

The Bay Area, CA to Seattle, WA.

830 miles one way. Came back, Blanco has 5500 miles now.

Was getting anywhere from 11-15 mpg on average doing 65-72 mph on a "closed course" empty or full. The trailer is a brick.

 

IMG_1800.jpg

Edited by BlancoSilverado
  • Like 1
Posted

Anyone out there have any issues with the trailer wire hookup on their truck?  I got a 2019 high country with the max towing package. Hooked up to the trailer and had no power going to the hookup. Trucks been in the shop for almost 2 weeks and they can’t figure out what’s going on.  The dealership has told me they have already replaced two different modules and it still never fixed it.  I just keep getting told that because it’s a new model there not much information on them to troubleshoot easily witch I do get but hate owning a truck I haven’t been able to drive and the truck was 6 weeks old on Saturday. Not impressed one bit. 

Posted
On 2019-05-02 at 3:24 PM, Limelight said:

You win the entire internet for towing the entire house.  Lolol

?

Posted
On 2019-05-30 at 10:30 PM, JR09country said:

Hahaha got a pick in front of a tim hortons. I know nothing about Canada in general but I know about Timmy's.

Sent from my ONEPLUS A6013 using Tapatalk
 

Then ya know a thing or two about coffee....☕️  Mac Donald's up here in Canada is really giving Tim’s a run for there money...

Posted (edited)

2019060421444993-IMG_0026-L.jpg

 

 

As mentioned above, yes, the 6x12 uhaul is a brick.  Hauled it 1100 miles, medium load - this was the weekend before Memorial Day.  Half of the drive was on I-40, the rest went up through panhandle of texas, new mexico, colorado and across the continental divide at 11,200 feet.   The 6.2 pulled it wonderfully, love the 10 speed.  I too came from a 2500hd/duramax, but this one did very well.   However, the mileage dropped as low as 10mpg and as high as 14mpg in the higher elevations running slower, but I ran it on tow haul most of the ride and I was giving it h*ll down the freeway running mid grade fuel.

Edited by bcato
  • Like 1
Posted
First time towing with the new rig.  600 miles round trip to Niagara Falls, ON for Memorial Day weekend.  The 6.2 had plenty of juice and I'm quite pleased overall.  Coming from a 2500 Duramax I was concerned.  The camper is about 7000 lbs and 33'.  We used a Husky Centerline TS weight distribution hitch.  We averaged 10.5 mpg on the way there with 93 octane gas.  The highest octane I could find in Ontario was 91 so that's what we used on the way home and we averaged about 10.0 mpg.  Those were the computer numbers but they were higher than I expected.  I didn't hand calculate though I may next time just to make sure they're accurate.
 
All things considered, we're very happy with the downsize. 
IMG_0699.thumb.jpeg.f4b5eb683f4e597ecbd034fff28d8021.jpeg


Is that the 2800BH? How do you like it? Looked at one a few times but have been hesitant to pull the trigger with my 17 Sierra 5.3.


Sent from my iPhone using Tapatalk
  • Like 1
Posted

Do these trucks squat quicker than the K2s? From some of the pics I feel like they do.  Could also just be the way the weight is distributed at that given moment from the angle the rigs are parked at.  Or maybe its the body lines/circular wheel wells making it look that way.  

Posted
28 minutes ago, SkiDooNick700 said:

Do these trucks squat quicker than the K2s? From some of the pics I feel like they do.  Could also just be the way the weight is distributed at that given moment from the angle the rigs are parked at.  Or maybe its the body lines/circular wheel wells making it look that way.  

I think they do. I loaded a lot of bags of dirt in my at4 and it squated easier than previous trucks. I’m sure if a trailer with a proper weight dist. hitch was hooked up it would do much better. 

Posted
14 minutes ago, Unclebud87 said:

I think it varies from the package. The at4 and trailboss have quite a bit lower payload and tow capacity.

Worried about this as well as the AT4 is what I want to replace my 16 AT, but my 16 hardley sags at all

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,920
    Total Members
    8,960
    Most Online
    Frank V
    Newest Member
    Frank V
    Joined
  • Who's Online   4 Members, 0 Anonymous, 1,193 Guests (See full list)


  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...