Jump to content

Recommended Posts

Posted
16 minutes ago, GA_LTZ said:

That’s the perfect look! What size tires are you running? Also, I wonder if the Z71 has less rake? I have the standard LTZ 4x4. 

I ended up getting the non-LT 275/60r20 ridge grapplers. I wanted the 275/65/20 or 285/60/20 ridge grappler, but they only came in a LT load rating. I wanted to maintain that comfy factory ride for a little longer. When these tires wear out, I’ll probably go up to the larger size.

Posted
24 minutes ago, ausomecasey said:

I ended up getting the non-LT 275/60r20 ridge grapplers. I wanted the 275/65/20 or 285/60/20 ridge grappler, but they only came in a LT load rating. I wanted to maintain that comfy factory ride for a little longer. When these tires wear out, I’ll probably go up to the larger size.

Forgive me but what is LT tires? Those look bigger than factory for some reason - that’s the same size as factory. I’m looking at BFG KO2 285x60x20 or 295x65x20. Also, the 1” level looks perfect but the local shop has a special on 2” levels. Which tire would look best do you think?

Posted
14 minutes ago, GA_LTZ said:

Forgive me but what is LT tires? Those look bigger than factory for some reason - that’s the same size as factory. I’m looking at BFG KO2 285x60x20 or 295x65x20. Also, the 1” level looks perfect but the local shop has a special on 2” levels. Which tire would look best do you think?

 

 

 

Just fyi, I have an LTZ Z71 Dmax with a 1” level and I can get my right front to rub at full lock in reverse. 275/60/20, 20x9 0 offset. I couldnt believe it when i heard it but it has happened a few times now. I would caution against going bigger unless you opt for a bigger leveling kit but with my 1” my truck is damn near level.

  • Like 1
Posted
32 minutes ago, GA_LTZ said:

Forgive me but what is LT tires? Those look bigger than factory for some reason - that’s the same size as factory. I’m looking at BFG KO2 285x60x20 or 295x65x20. Also, the 1” level looks perfect but the local shop has a special on 2” levels. Which tire would look best do you think?

 

 

 

Basically LT tires are stiffer and heavier, but they have a higher load capacity. And sometimes the LT tires also look more agreesive because of deeper treads. 
 

For the Ridge Grapplers, they make two 275/60r20 tires. One is the Non-LT and the other is LT. In my screenshots, for the same sizes, you can see how the LT version is about 12lbs heavier for each tire and how it also deeper treads.
 

295/65/20 is going to be a big tire. I don’t know if that would clear. But ive seen a guy on here with 295/60/20 and a 2” level, and it looked really good. I really like the look of the 285/60/20, but they only come in LT rating.

CD2E0E09-F526-444F-860E-F4D5A7524603.jpeg

3A2328F4-250C-42FA-86B0-057AEC77269D.jpeg

Posted
8 minutes ago, ausomecasey said:

Basically LT tires are stiffer and heavier, but they have a higher load capacity. And sometimes the LT tires also look more agreesive because of deeper treads. 
 

For the Ridge Grapplers, they make two 275/60r20 tires. One is the Non-LT and the other is LT. In my screenshots, for the same sizes, you can see how the LT version is about 12lbs heavier for each tire and how it also deeper treads.
 

295/65/20 is going to be a big tire. I don’t know if that would clear. But ive seen a guy on here with 295/60/20 and a 2” level, and it looked really good. I really like the look of the 285/60/20, but they only come in LT rating.

CD2E0E09-F526-444F-860E-F4D5A7524603.jpeg

3A2328F4-250C-42FA-86B0-057AEC77269D.jpeg

Cool thanks for clarifying. So 285/60/20 is going to be my best bet with a 2” level. BFG KO2

Posted

LT = Light Truck

P = Passenger

 

LT will be heavier due to its construction, stronger sidewall, better for towing and off road. Passenger a softer more comfortable on road ride but less capable towing/off road. 

  • Like 1
Posted
19 minutes ago, GA_LTZ said:

Cool thanks for clarifying. So 285/60/20 is going to be my best bet with a 2” level. BFG KO2

Yea probably so. You might be able to squeeze 295/60/20 if you wanna go a little larger. But I’d definitely avoid 295/65/20 with only a 2” level.

  • Like 1
Posted (edited)

I’m not gonna lie I have had my truck for about 3 weeks now. And the further I have looked I to it I would do this.  I went had this lift on my Titan Xd and loved it. I Didn’t realize they had it for the 2020. It will give you a great ride and clearance. But that being said I do really like my 2 min n rc leveling kit. The price and the ride with the way it looks is hard to pass up. Specially if you can get a deal. Either way you will love it. But if you want larger tires, consider the below.***  (As long as you don’t have the duramax this is for the 1500) 

https://www.roughcountry.com/gm-suspension-lift-kit-22630c.html?find=2020-gmc-sierra-1500-4wd-568979

Edited by cnoyes801
Posted
On 11/7/2019 at 4:20 PM, Flatblack83 said:

I was going to try 35s but decided no too and had 295/60/20 wildpeak at3w's installed today. These are 33.9x11.7. Prob could of went bigger but they dont rub and look pretty decent.  I chose these over the 275 65s because of the width. I figured the little wider tire on the wheel would help with the stock wheels.

20191107_161858.jpg

20191107_161846.jpg

Love it! Are you running a leveling kit?

Posted
On 4/11/2020 at 8:29 AM, Keinsi said:

I would love to see more pictures of this set-up.  I don't remember seeing anyone else on this forum with pictures of their RC 3.5' inch lift and I would like to do the same with 285/55r22 tires. The thought process is that it will achieve the same look and balance as GM's 2" Trail Boss lift + a 1.5" front level but at 75% of the price and the addition of coil overs. 

 

20200424_180938-01.jpeg

Posted (edited)

Just got the 2 inch Readylift level installed. Very happy with it. Didn't notice much change in the ride quality, which was something that I was worried about. 

 

I want to keep the truck as stock as possible. Looking to add 1.5 inch wheel spacers and maybe change out the tires. Trying to stay away from a heavy 10 ply tire. I've ran Duratracs mostly, and had them in a 35" on my previous Ram. Any recommendations on a 285/60/20? 

 

 

 

 

20200424_155706.jpg

Edited by Trza
Posted

Here is my 2020 1500 4x4 Duramax. I have 2” Rough Country top coil spacer and 2”block on the rear with shock extension I put 35/12.50R20. I trimmed very minimal on the inner portion of the mud flap. Other then that i like the way it sits.

4C7118F8-D6D0-491B-BB9B-600905A83715.jpeg

87E339B9-1466-49E4-B8D2-779D0F51839A.jpeg

  • Like 2
Posted
9 hours ago, Duramax417 said:

Here is my 2020 1500 4x4 Duramax. I have 2” Rough Country top coil spacer and 2”block on the rear with shock extension I put 35/12.50R20. I trimmed very minimal on the inner portion of the mud flap. Other then that i like the way it sits.

4C7118F8-D6D0-491B-BB9B-600905A83715.jpeg

87E339B9-1466-49E4-B8D2-779D0F51839A.jpeg

More photos please! Looks good though! I have the 2 inch Zone Off-road top spacer sitting in the garage waiting to go in just need a day off to do it ! 

Posted
17 hours ago, JSW74 said:

More photos please! Looks good though! I have the 2 inch Zone Off-road top spacer sitting in the garage waiting to go in just need a day off to do it ! 

 

image.jpg

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I went to order some PF63 oil filters from an on line GM parts source, and the blue PF63 oil filters seem to be getting phased out. They show the new part number as 19363567, which is a black colored AC Delco Silver product apparently marked PF63A. Some sites show a part number 12693541, which is a black colored AC Delco Ultragard Gold filter marked UPF63R.    I assume the UPF63R is the better one, but I’d be happy if I could just get blue PF63 filters I’ve been using.    Can anyone explain what is going on with the filter part number changes and any actual design changes?  Any other advice on buying OEM filters right now?  Thanks 
    • thanks for coming back and posting what the fix turned out to be.
    • Only TAN I have for the product was at 5K in service miles and it was 2.71
    • If anyone lands here looking for an update - the problem wasnt with the hose, the clamp, etc... I purchased a metal Thermostat housing that just must not of been made to spec. It just wouldn't plug up the hose.. Went back to a plastic cheap housing - leak fixed. Some plumbers tape carefully placed in tandem with a clamp likely would've gotten the job done.   Best,
    • For anyone following, this is what I have deduced from this forum - and my very specific niche case. Please do let me know if you see me going in the wrong direction here. For context, I have a 16 sierra 1500 w/t. Has TC and Cargo light switches. Removed the switch to find the X1 and X2 of the S48A connection populated with wires (x1 10-14, and x2 1-5).   Took photos of the X61A-X5 to find the wires from S48A-X1 land here at their respective pins (10, 11, 17, 23 on the X5). Was hopeful that this means my X51A fuse box has the appropriate pins... No cigar. So now I will be routing wires from the rear of the X61A-X1 to the engine bay and to their respective negative relay triggers. Please see to the diagram. If any has insight as to where the S48A-X2 pins 4 and 5 land that would be awesome.   Will be attempting this sometime shortly and will likely make a youtube video out of it.   Note: please disregard fuse sizes. Main fuse will likely be 25A, all mini bus fuses will likely be 10-15A.   Here is my parts list: GM 84347199 - TC, Cargo Light, Exhaust Brake (useless to me unless I find a means to reconfigure), Aux 1 - 4. 12V 6 Way Pre-Wired Fuse Relay Box Kit with 4 x 40A 4-Pin Relays (link below - some mods required to make negative trigger)            https://www.amazon.ca/dp/B0F4KCS43B?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Various wire sizes (12 AWG - red and black, 14 AWG, 16 AWG multi-colored bundle) Wire termination leads for X61A-X1 (unknown at this time) Crimp connectors/Soldering Gun Heat Shrink Split Wire Loom To be continued...    Cheers
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...