Jump to content

Recommended Posts

Posted

Man does not have the ability nor moral/political will to correct what it destroys.

 

On 2/7/2021 at 7:23 AM, gearheadesw said:

 

 

Humans are the ONLY problem, take humans off the Earth, and it would heal back to a natural state. Not this chemically polluted thing that we have made.

Which tells you who does.

  

Posted

I believe in God.  I believe He created this Universe.  And many others.  I believe He created life.  I believe He created us.  And I believe He expects us to take care of His creations, including this earth, our bodies, and everything else.  That being said.. I do believe He expects us to use common sense and to learn and grow.  So if we can learn how to take better care of this planet, I believe it is in our best interest.  But taking our time, and doing it smartly.  Not rushing to things. 

Posted
8 hours ago, Colossus said:

I believe in God.  I believe He created this Universe.  And many others.  I believe He created life.  I believe He created us.  And I believe He expects us to take care of His creations, including this earth, our bodies, and everything else.  That being said.. I do believe He expects us to use common sense and to learn and grow.  So if we can learn how to take better care of this planet, I believe it is in our best interest.  But taking our time, and doing it smartly.  Not rushing to things. 

Genesis 1:27,28 (Byington)

 

And God created man in his image; in the image of God he created him; male and female he created them; and God blessed them. And God said to them “Breed and multiply, and fill the earth and subjugate it, and bear empire over the fishes of the sea and the birds of the sky and all the animals that move about on the earth”;

 

Taking care of the home he created for us is the assignment he gave us indeed. One that would have been an easy task had we remained perfect. ?  Not so for the imperfect creatures we became.  :( 

Posted

Electric cars? Here in Texas. Wind farms off line. We get 23 percent of our power from them, frozen. Nuke plants off line. Even with the abundance of natural gas. There isn’t enough because of poor planning. Worry too much about green energy. So here some 1 million plus people without power in central - south Texas. 7 degrees for the low tonight.


Sent from my iPhone using Tapatalk

  • Like 1
Posted
It's only going to get worse karnut.

Sent from my Pixel 3 using Tapatalk



Yea it did, mines out now. Maybe it’s a rolling blackout.


Sent from my iPhone using Tapatalk
Posted
wonder if they are gonna let me order that plow prep with that all electric 3500hd and be able too run her 20+hrs every snow storm
That's a hard NO

Sent from my Pixel 3 using Tapatalk

Posted

Seriously when did you think this was going to happen?

When did you think we were going to move away from oil to electric? In fifty or a hundred years?

That's what they were thinking 50 and 100 years ago.

 

That pipeline that was cancelled. Was it really going to be needed in the next 10 years?

 

Same with cattle, pigs and chickens. Vegetable based meats will be the main thing in 10 years.

It's time to get out of the meat business.

 

Solar and wind power will advance. Batteries will advance.

Tesla Power Walls are already powering homes during emergencies and it won't be long before the entire grid is not needed.

 

Electric cars will become more popular as the technology advances.

This is after all the 21st century.

 

People need to realize that we're going to move forward away from oil before it runs out completely.

Posted

We're consuming all kinds of resources. We're on all seven continents. We're causing the overpopulation of dogs and cats, along with cows and pigs. We'll mess up the planet a lot more if we were to give everybody electric cars.

I had a bumper sticker on my car... save the planet, kill yourself.

When the grid goes down, we'll be wishing for gas generators to recharge our cars.

Posted (edited)

29 million people in the state of Texas and a little snow storm puts the 'grid' flat on it's arse.

Let's plug in 10 million more cars/truck/busses.

Yep, we're ready for all electric transportation. 

:crackup:

Edited by Grumpy Bear
  • Like 2
Posted
wonder if they are gonna let me order that plow prep with that all electric 3500hd and be able too run her 20+hrs every snow storm
It's a hard no because the 3500HD won't be going electric. They'll still be has because towing companies use them as tow trucks. Somebody has to save the electric cars that break down on the highway.

Sent from my SM-N960U using Tapatalk

Posted

29 million people in the state of Texas and a little snow storm puts the 'grid' flat on it's arse.

Let's plug in 10 million more cars/truck/busses.

Yep, we're ready for all electric transportation. 

:crackup:

Texas isn't built like Montana. Snowbelt states tend to put electrical wires in the ground, deep enough to protect them from the ice. They often use pvc conduit and bury it deep enough to be below the depth of frozen ground during a typical winter weather seasons. This storm is atypical for Texas. Best advice I can Texans right now is to open the cupboard doors under the sink and let your water lines drip. Hot water freezes before cold water because it has less impurities. Good luck you guys. I've dealt with a frozen water line that burst and flooded my house. What a nightmare. Fortunately, it was such a widespread problem at the time that FEMA declared it a natural disaster and that percents my insurance rates from going up.

Sent from my SM-N960U using Tapatalk

Posted
Texas isn't built like Montana. Snowbelt states tend to put electrical wires in the ground, deep enough to protect them from the ice. They often use pvc conduit and bury it deep enough to be below the depth of frozen ground during a typical winter weather seasons. This storm is atypical for Texas. Best advice I can Texans right now is to open the cupboard doors under the sink and let your water lines drip. Hot water freezes before cold water because it has less impurities. Good luck you guys. I've dealt with a frozen water line that burst and flooded my house. What a nightmare. Fortunately, it was such a widespread problem at the time that FEMA declared it a natural disaster and that percents my insurance rates from going up.

Sent from my SM-N960U using Tapatalk


Last night electricity rolling on for an hour off for on one. Everything rapped and dripping. First night only the cold line to washer froze. Unhook from washer turn on 1/2 hour going again. Last night up every 3 hours run washer. 3 to 6 cold water frozen again. On the very informative news says just drip one and good. Don’t believe it especially at 10 degrees. Funny growing up in New Jersey. I have no recall of dripping or freezing problems.


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...