Jump to content

Recommended Posts

Posted

BP in Rochelle, Illinois

E-85 $2.60 (test 84%)

87     $4.80

89     $5.30

93     $5.80

 

Pepper is back on E-85 :) 

 

 

  • Like 2
Posted
3 hours ago, Grumpy Bear said:

BP in Rochelle, Illinois

E-85 $2.60 (test 84%)

87     $4.80

89     $5.30

93     $5.80

 

Pepper is back on E-85 :) 

 

 

Wondering if the manufacturers aren't reconsidering going back to flex-fuel vehicles? First one that does might see a substantial bump in sales, at least in the I states. Maybe the corn belt isn't a big enough market?

Posted
8 hours ago, Donstar said:

Imagine my excitement when gas price locally went down from $210.9 per litre to $207.9 per litre this weekend! 😂

 I sure hope you have a mis-placed decimal point, if not it's time to get a mule or horse and wagon.

Posted

I paid $6.25 for diesel at an Indian Reservation today a few hours North of Seattle. Diesel a few miles off reservation was $6.89 and the highest I saw on my trip was $7.99. My Silverado took about 21 gallons on this fill-up. ~$131 to fill up the truck.

 

One of the fun cars needs gas again and Ethanol-free 91 is going for $7.29 locally. I use that stuff in my mower and power equipment too. 10 gallons to fill up the car, and 10 gallons in cans will be $145.80.

Posted

87 still around $4.25 a gallon.

 

Diesel down to $5.19.

Posted

We took the scenic cruise today, the girl wanted to go to the beach up at the NH border, lowest price I saw just over the border in NH was $4.29 cash, highest was $4.69. 87octane. I haven't been paying attention to see if they raised the alcohol content to 15%. It was a nice day around 90 degrees, west wind, the ocean still too cold for swimming though

Posted (edited)
14 hours ago, Atlas said:

 

Your state gas tax is $0.24/gallon. A relative bargain considering they have to repave half the roads every year after the spring thaw cycle.

 

If you'd prefer $0.20/gallon, you can move to Cornhole or Montgummmrey Texas.

REPAVE the roads after EVERY spring thaw cycle? 🤣 Can tell you're not from here. They pave the roads every FIFTY years on average, unless it's in a place where lots of eyes see it (interstate) or where connected politicians live.

 

My road hasn't been paved in SEVEN DECADES. 

 

Since we collectively send BILLIONS of dollars a year to the scumbags on Beacon Hill, I'd like to know just where in the eff all this money is going??? Certainly not the roads ... 😠

 

I would LOVE to live in Texas!! I'd be much richer I can tell you that much. And my vehicles would last 2,000x longer.

 

P.S. _ you forgot the 0.254 cent per gallon underground storage tank replacement fee. So, 26.54 cents per gallon.

 

WHY we have to pay this, I have NO clue ... but I'd wager the scumbags running the state stuff that right in their grubby pockets.

Edited by Jsdirt
  • Like 1
  • Haha 1
Posted
16 hours ago, Grumpy Bear said:

BP in Rochelle, Illinois

E-85 $2.60 (test 84%)

87     $4.80

89     $5.30

93     $5.80

 

Pepper is back on E-85 :) 

 

 

Since E85 gas has about 18% - 27% less energy than E10 gas, I would be curious to know what your MPG and cost per mile is with the higher alcohol fuel.  

 

The following is from ChatGPT:

Most “regular” gas in the U.S. is E10 (10% ethanol). E85 is a high-ethanol blend used only in flex-fuel vehicles.

Here’s the real-world fuel economy difference:

Fuel Typical MPG vs Pure Gasoline Typical MPG vs E10
E10 About 2–3% lower Baseline
E85 About 20–30% lower About 18–27% lower

So if your vehicle gets:

  • 20 MPG on E10
  • expect roughly 14.5–16.5 MPG on E85

The reason is simple: ethanol contains less energy per gallon than gasoline.

A few important points:

  • E85 usually costs less per gallon, but not always enough less to offset the MPG loss.
  • E85 has very high octane (around 100–105), so turbocharged or tuned engines can sometimes make more power on it.
  • You must have a flex-fuel vehicle to safely run E85. E10 is safe for essentially all modern gasoline vehicles.

A quick way to compare actual operating cost:

Cost per mile=Price per gallonMPG\text{Cost per mile} = \frac{\text{Price per gallon}}{\text{MPG}}Cost per mile=MPGPrice per gallon

For example:

  • E10 at $3.00/gallon and 20 MPG = 15¢/mile
  • E85 at $2.30/gallon and 15 MPG = 15.3¢/mile

In that example, E85 is slightly more expensive to drive despite the cheaper pump price.

Here’s the basic energy relationship behind the MPG difference:

Fuel Economy Loss≈Lower Energy Content of E85Energy Content of E10≈20%−30%\text{Fuel Economy Loss} \approx \frac{\text{Lower Energy Content of E85}}{\text{Energy Content of E10}} \approx 20\%-30\%Fuel Economy LossEnergy Content of E10Lower Energy Content of E8520%30%

Posted

$4.75 85 oct.

Posted
1 hour ago, PhilB said:

Since E85 gas has about 18% - 27% less energy than E10 gas, I would be curious to know what your MPG and cost per mile is with the higher alcohol fuel.  

 

The following is from ChatGPT:

Most “regular” gas in the U.S. is E10 (10% ethanol). E85 is a high-ethanol blend used only in flex-fuel vehicles.

Here’s the real-world fuel economy difference:

Fuel Typical MPG vs Pure Gasoline Typical MPG vs E10
E10 About 2–3% lower Baseline
E85 About 20–30% lower About 18–27% lower

So if your vehicle gets:

  • 20 MPG on E10
  • expect roughly 14.5–16.5 MPG on E85

The reason is simple: ethanol contains less energy per gallon than gasoline.

A few important points:

  • E85 usually costs less per gallon, but not always enough less to offset the MPG loss.
  • E85 has very high octane (around 100–105), so turbocharged or tuned engines can sometimes make more power on it.
  • You must have a flex-fuel vehicle to safely run E85. E10 is safe for essentially all modern gasoline vehicles.

A quick way to compare actual operating cost:

Cost per mile=Price per gallonMPG\text{Cost per mile} = \frac{\text{Price per gallon}}{\text{MPG}}Cost per mile=MPGPrice per gallon

For example:

  • E10 at $3.00/gallon and 20 MPG = 15¢/mile
  • E85 at $2.30/gallon and 15 MPG = 15.3¢/mile

In that example, E85 is slightly more expensive to drive despite the cheaper pump price.

Here’s the basic energy relationship behind the MPG difference:

Fuel Economy Loss≈Lower Energy Content of E85Energy Content of E10≈20%−30%\text{Fuel Economy Loss} \approx \frac{\text{Lower Energy Content of E85}}{\text{Energy Content of E10}} \approx 20\%-30\%Fuel Economy LossEnergy Content of E10Lower Energy Content of E8520%30%

 

Lifetime averages for both fuels is 28 mpg on E-10 and 21 on E-85 at 70% so about a 25% reduction. When the E-85 tests over 80% like it does now her history suggest 19 mpg and change or roughly 33% lower. 

 

That said repairing the HPFP already is netting some noticeable improvement so lets call it 30% on the highest alcohol percentages.  Since the current local market is pricing E-85 at 84% at a 55% discount I can make that work all day. 46% discount to Regular is a winner as well. 

 

But, even when it isn't, I run it. It's clean, very clean and easy on the oil. 

  • Like 1
Posted
14 hours ago, garagerog said:

 I sure hope you have a mis-placed decimal point, if not it's time to get a mule or horse and wagon.

Thanks for the correction.  Our gas prices are advertised in cents per litre. When we quote the price in dollars we tend to ignore the point 9 at the end of every price change.  Verbally, I would tell you our current local price is $2.07 per litre.  We should round up to $2.08 but ...   

  • Like 1
Posted

There we go, that's the mid-morning bounce I was expecting. Because mean tweets on Sunday mean Market Manipulation Monday and higher gas prices by Wednesday.

 

image.thumb.png.d37fc0c322a932337ca6907c5965cbea.png

Posted
17 minutes ago, Atlas said:

There we go, that's the mid-morning bounce I was expecting. Because mean tweets on Sunday mean Market Manipulation Monday and higher gas prices by Wednesday.

 

image.thumb.png.d37fc0c322a932337ca6907c5965cbea.png

Yea, I agree those Iran tweets are really inflammatory. Some people never learn.😳

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,716
    Total Members
    8,960
    Most Online
    BDS my HD
    Newest Member
    BDS my HD
    Joined
  • Who's Online   1 Member, 0 Anonymous, 449 Guests (See full list)


  • Latest Articles

  • Posts

    • Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • How about them NICKS!!! 
    • Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...