Jump to content

Recommended Posts

Posted

I have a 2020 Silverado Crew Cab that came new with a plastic bed liner.  This truck was purchased to replace a 2008 Silverado that was mechanically sound but rusting pretty badly even though I kept it clean and waxed.  Winters are tough on vehicles in Northeast Ohio. My plan is to keep this one as long as possible as I do have another vehicle I drive too.  This truck has been rust-proofed and ceramic coated.  I do have a hard tonneau cover on it. 

 

My question is whether or not the plastic liner will trap water underneath and cause the bed to rust.  I hate to throw away a liner that costs about $400.00 from Chevy but I don't want to make a mistake I will regret later.  Any advice: What would you do?  Keep it or spend the money on a spray-in bed liner?  TIA

 

Posted (edited)
10 minutes ago, streetglider said:

I have a 2020 Silverado Crew Cab that came new with a plastic bed liner.  This truck was purchased to replace a 2008 Silverado that was mechanically sound but rusting pretty badly even though I kept it clean and waxed.  Winters are tough on vehicles in Northeast Ohio. My plan is to keep this one as long as possible as I do have another vehicle I drive too.  This truck has been rust-proofed and ceramic coated.  I do have a hard tonneau cover on it. 

 

My question is whether or not the plastic liner will trap water underneath and cause the bed to rust.  I hate to throw away a liner that costs about $400.00 from Chevy but I don't want to make a mistake I will regret later.  Any advice: What would you do?  Keep it or spend the money on a spray-in bed liner?  TIA

 

 

 

Water gets under them but that's not what necessarily starts the rust.  Its the fact that the plastic liners move/vibrate in the box and eat the paint away/scratch the bed paint.  That's what starts it all.

 

IMO, spray liner is the best way to go.  If you pull that liner out seeing its been there for 2 years already, you will see what its done to the bed already.  

Edited by newdude
Posted

My preference has always been the spray in, for similar reasons to what newdude mentioned above (but it's all on your preference). 

 

I just bought a new 2023 2500HD a couple weeks back, it didn't have a liner so I had the dealer spray one in this week.  Was a one day job, looks just like factory, was $625 out the door.  

Posted (edited)

Most of my trucks had the plastic. They had stuff bolted to them. Fuel tanks usually. The half tons that I later used had spray in done before purchase. I never bought a work truck equipped. Usually a year end loaded were the only ones they did deals on. I only bought deals. I guess I’d lean spray in for the non slip. 

Edited by KARNUT
Posted

I have had many plastic bedliners in the past, they were better than nothing. When I had to remove them they had worn off the paint. I agree with newdude and others about the spray in being the best way to go. If you run your truck through an Automatic Car Wash make sure to get the underbody wash/flush. If you use a pressure washer type car wash make sure to clean out your wheel wells and under the wheel arch lips. I also bought and installed the rear wheel well liners.

Posted
2 hours ago, streetglider said:

I am leaning heavily towards pulling the plastic liner out.  

 

Just do it and never look back with a smile, unless you're on a budget then do the plastic liner. End of story. 👍 

Posted

100% spray on. The plastic just hides any problems that may be starting and traps moisture  plus cargo slides around too easily

Posted

Every truck I've owned since 2004 I've done a spray-in bedliner. I just like the looks and durability of them. Don't have to worry about the thing rattling around or water getting underneath or anything. Getting the spray-in liner and a good tonneau cover are the first things I do in any truck I buy.

Posted

Be aware the radio is linked to the serial data system of the truck so messing with it may trigger the security system and render the truck inoperable. Advice and parts at Crutchfield

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Not sure about DFM tech but i know there's a stop/start deactivation button. 
    • I could be interested if they axed cylinder deactivation and at least have a button for stop start. I’m sure the HP numbers will be higher. I would want a longer warranty to help build confidence. I’m a less is more guy as I get older. A V-8 work truck model would be my choice. I know a few outfitters for custom additions I prefer. 
    • It's official. GMC pulled the covers off the next-gen 2027 Sierra 1500, and we got the first official look. Full breakdown here: https://www.gm-trucks.com/next-gen-2027-gmc-sierra-1500-v8-trim-changes/   The quick hits: SLE and SLT are dead. The new core retail trim is just called "Elevation". Two new V8s, a 5.7L and a 6.6L built with high-performance Corvette architecture roots. No horsepower or torque numbers yet. The 2.7 TurboMax finally ditches the old gearbox and gets the 10-speed automatic. AT4X moves to larger standard 35-inch tires with front and rear e-lockers, Multimatic DSSV dampers, and heavy-duty Jounce Control Dampers. Over 60 inches of combined display on Denali Ultimate and AT4X, complete with a motorized articulating center screen and an adaptive passenger screen. Seven simplified trims across the entire model line to clean up ordering confusion.   So let's get into it: New 5.7L and 6.6L gas V8s with custom active exhaust tuning and a Corvette connection. Is this the exact engine lineup half-ton traditionalists have been begging for? Purging the iconic SLE and SLT names after all these years to lean entirely on Elevation as the high-volume core. Bold move, or a mistake? That motorized articulating 16.3-inch screen that slides up to reveal a hidden dashboard vault. Awesome mechanical theater, or does it make you nervous about long-term durability? Physically lowering the headlamps in the front fascia to improve road courtesy and stop blinding oncoming traffic. Smart real-world engineering, or does it hurt the truck's aggressive stance? What trim are you putting your name down for on day one? Drop your first impressions below.  
    • My overnight hospital stay turned into five.  I developed a post operative fever and an erratic  heart rate.  A blood clot in the lungs was the culprit.  This is apparently a common post surgical complication and easily remedied.   I was the youngest in a four bed ward and a Doctor with a Geriatric specialization was in charge of my care.  All of the nurses were good and some were outstanding at dealing with old people.  It was very evident that my age triggered a different level of care!  My advice to any senior going for a hospital stay is to have a trusted family member advocate visible.  If not, you will still be well cared for, but you may discover that your voice  isn't as strong as it once was! 
    • $4.25 85 oct. in town, down 50 cents.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...