Jump to content

2014+ Leveling Kits

bcazier

By bcazier
in Modifications & Accessories

 Share

Recommended Posts

'17 Sierra Enthusiast

'17 Sierra

Posted
Posted (edited)

I've been doing some digging and watching some YouTube tutorials and it does seem pretty easy. I'm going to go with the 2" Rough Country spacers. I figured I'd buy the part and whatever I was going to spend on labor, I would just spend on tools haha your replies are very much appreciated my friend!

I too read up on everything I could find. I've always done my own wrenching on my cars and motorcycles....airplane too but only what was legal on the plane. The only problem I had with the leveling kit was getting the ball joints free. I got the passenger side free but not the driver side. I was able to get the spacer in that side without releasing the ball joint. Took a bit of muscle though. I got the alignment done today and it was just a bit off...actually could have gotten away without the alignment but I'm glad I had it done anyway. The height looks really good. Had a 3" rake now only 1". That's all I'm going to do too. I might switch over to Bilsteins at some point but we'll see.

Good luck....let us know how it turns out!

Edited by '17 Sierra
  • Replies 7.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Saleenpowr
Saleenpowr

So i put my RC 2" level kit and Toyo 295/55/20's on this weekend. Install was simple, just like on my 2011. It definitely helps to have an extra set of hands when wedging that spacer in there. 295/

Saleenpowr
Saleenpowr

Thanks. Here is one more from yesterday. Considering we're getting 8-10 inches of rain the next two days, I won't be taking any better pics soon.  

FH212
FH212

Mine is finally done! After months of research I went with the RC 2.5" level kit front only, stock rear block. 20"x9" Fuel Nutz w/ +1 offset, 33x12.50x20 Toyo M/T tires. No rubbing, No trimming, yet a

Posted Images

Sierra Jon Enthusiast

Sierra Jon

Posted
Posted

I own a 2016 Silverado, and it comes equipped with lane keep assist and forward collision warning systems. My question is, will adding a leveling kit affect the functionality of the systems? Has anyone had any issues, or have you had no issues at all? Thanks in advance!

Does not affect it at all. I have both systems as well and they utilize the camera on the windshield. I have not noticed any difference.

 

Sent from my Nexus 6 using Tapatalk

spartantx117 Enthusiast

spartantx117

Posted
Posted (edited)

Is there a advantage/disadvantage to using the upper lift kit over the lower? I've seen both but from what I've searched and read a lot of people seem to use the lower rough country kit. I seem to research everything and over think almost everything before I do it.

 

I have also seen some that use both the upper rings and lower blocks. Just trying to figure out what is best.

Edited by spartantx117
'17 Sierra Enthusiast

'17 Sierra

Posted
Posted

Rough Country makes their spacers out of a composite material which doesn't corrode. Good quality stuff. Not that the others aren't good either. Anytime you go more than 2", you want to split it up between upper and lower because you're limiting suspension travel by that much so if you put it all on one side, you're more likely going to max out in that one direction more often and that's what is hard on the ball joints.

  • Like 1
jeter33 Enthusiast

jeter33

Posted
Posted

Question: Has anyone noticed that the lower control arms have notches that the lower crossbar of the strut sits against when bolted down...and the level kit lower spacer plates don't have one built in and essentially makes the bolts bear all the force? Is this something to be concerned about and how strong are those bolts? Sorry if a little confusing just doesn't seem to be the best design. Would like to hear opinions if this matters at all.

 

I have the ReadyLift 2.25 waiting to install once my wheels come in since the Bilstein 6112's arent out yet and noticed this. I'll try to find a pic.

'17 Sierra Enthusiast

'17 Sierra

Posted
Posted

I see what you're talking about. I just installed mine and didn't think anything of it. They act as a stop, probably in case the bolts loosen up. As long as you torque them down good (37 ft lbs), I think you're good. I went to 45 since more is always better right?! I think if it were a problem, we would have heard by now.

  • Like 1
'17 Sierra Enthusiast

'17 Sierra

Posted
Posted

Has anyone ever experienced warranty problems after adding leveling kits?

  • Like 1
Rolling Thunder Enthusiast

Rolling Thunder

Posted
Posted (edited)

Has anyone ever experienced warranty problems after adding leveling kits?

 

That depends on how you interpret this GM advisory, or rather how GM will interpret a level / lift kit:.

:

Edited by Rolling Thunder
jeter33 Enthusiast

jeter33

Posted
Posted

I see what you're talking about. I just installed mine and didn't think anything of it. They act as a stop, probably in case the bolts loosen up. As long as you torque them down good (37 ft lbs), I think you're good. I went to 45 since more is always better right?! I think if it were a problem, we would have heard by now.

Yeah they do and the only level kit I see having something similar to incorporate is the Zone kit which is made out of a composite...but the lip is super small. If it was machined out of aluminum and substantial would make me feel better. Not that I will be mashing this thing off-road but still better piece of mind.

tyrich88 Enthusiast

tyrich88

Posted
Posted

Has anyone ever experienced warranty problems after adding leveling kits?

My dealer installs mine. So, no.

gorskimc Enthusiast

gorskimc

Posted
Posted

2" RC, 275/65/20 KO2's.

 

attachicon.gifOptimized-2014 AT.png

 

I'm just curious why you stayed with 275/65's instead of going with something wider? Maybe a 305/55R20? The diameter is only slightly different (33" with the 275/65's vs. 33.2" with the 305/55's.)

 

I suppose there is more patch contact area from a 305 vs a 275, so you will get a little more drag (ie. less fuel mileage) but I personally just think that the wider tires look so much better on a lifted/leveled truck.

 

From everything I've read it seems like the 305/55R20 will fit on a truck with at least a 2" level. There is a possibility for a very minor rub at full lock, but if it does it would be minor. Some people have stated they had a 2" level with zero rub on the 305's.

 

I just picked-up a 2017 GMC Sierra and put a 2.5" Motofab level kit on it, and am planning on putting 305/55R20 K02's on it in the next week or two. I was just curious if there was a fit issue that prevented you from going wider, or if it was just cost and fuel mileage.

 

Your truck looks great though! I've always like BFG's for all around tires. Not too noisey on the highway and great off-road in the woods.

tyrich88 Enthusiast

tyrich88

Posted
Posted

 

I'm just curious why you stayed with 275/65's instead of going with something wider? Maybe a 305/55R20? The diameter is only slightly different (33" with the 275/65's vs. 33.2" with the 305/55's.)

 

I suppose there is more patch contact area from a 305 vs a 275, so you will get a little more drag (ie. less fuel mileage) but I personally just think that the wider tires look so much better on a lifted/leveled truck.

 

From everything I've read it seems like the 305/55R20 will fit on a truck with at least a 2" level. There is a possibility for a very minor rub at full lock, but if it does it would be minor. Some people have stated they had a 2" level with zero rub on the 305's.

 

I just picked-up a 2017 GMC Sierra and put a 2.5" Motofab level kit on it, and am planning on putting 305/55R20 K02's on it in the next week or two. I was just curious if there was a fit issue that prevented you from going wider, or if it was just cost and fuel mileage.

 

Your truck looks great though! I've always like BFG's for all around tires. Not too noisey on the highway and great off-road in the woods.

you are correct about the contact patch being wider, but the height isn't quite right. 305/55 are 33.2 as you said, but the 275/65/20 are just over 34" tall and they don't rub in most situations.

  • Like 1
gorskimc Enthusiast

gorskimc

Posted
Posted

you are correct about the contact patch being wider, but the height isn't quite right. 305/55 are 33.2 as you said, but the 275/65/20 are just over 34" tall and they don't rub in most situations.

Yep. You're right. I did the calc's with a 60 aspect ratio instead of 65. The 275/65's are actually just over 34" diameter, as you stated.

 

So, now the question is taller or wider? Do you go with 34" diameter and a 275mm (10.8") wide tire or a 33.2" diameter and a 305mm (12") wide tire? What does everyone think looks the best?

tyrich88 Enthusiast

tyrich88

Posted
Posted

Yep. You're right. I did the calc's with a 60 aspect ratio instead of 65. The 275/65's are actually just over 34" diameter, as you stated.

 

So, now the question is taller or wider? Do you go with 34" diameter and a 275mm (10.8") wide tire or a 33.2" diameter and a 305mm (12") wide tire? What does everyone think looks the best?

Well, there are other options as well. You could go in between at 285/60 (33.5*11.2) or 295/60 (33.9*11.6)

 

I do really like the 305s though.

i have 275/70R18 BFG KO2 and i love them though.

So both ways would be great, just depends on the look you want.

I think the 285/60/20 or 295/60/20 would be about perfect

Best of both worlds

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined

  • Who's Online   3 Members, 0 Anonymous, 948 Guests (See full list)

  • Latest Articles

  • Posts

    • davester
      New to Me 2010 SLE (Quirks, Issues)

      By davester · Posted

      not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • lowrider
      Range RA007 DFM Module

      By lowrider · Posted

      I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Tyler Gibbs
      2022 2500HD with a new RSI SmartCap

      By Tyler Gibbs · Posted

      Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • fm2176
      It's Been a Long Time...

      By fm2176 · Posted

      My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...