Waaazooo Posted August 20, 2017 Posted August 20, 2017 (edited) Ooops Edited August 20, 2017 by Waaazooo
Waaazooo Posted August 20, 2017 Posted August 20, 2017 Sharp looking rig! What are you running up front? And may just be the angle, but anything in the rear? Sorry meant to quote you. 2" level in the front +1" block in the rear. 275/65-20 (34") tires. Sent from my iPhone using Tapatalk
THE_Engineer Posted August 22, 2017 Posted August 22, 2017 Rough Country 2.5" and 35x11.50 Nitto Ridge Grapplers 4
Coles5515 Posted August 23, 2017 Posted August 23, 2017 Rough Country 2.5" and 35x11.50 Nitto Ridge Grapplers Yup! Made my new setup pretty easy to decide on.
RHStansbury Posted August 23, 2017 Posted August 23, 2017 Rough Country 2.5" and 35x11.50 Nitto Ridge Grapplers OK, I'll bite. Where do they rub? 1
Sierra 5.3 Posted August 23, 2017 Posted August 23, 2017 OK, I'll bite. Where do they rub? My thoughts as well.
RHStansbury Posted August 23, 2017 Posted August 23, 2017 My thoughts as well. Considering these are bigger than a 285/65/20, and everyone says those rub, I just don't see how it's feasible without some rub. 1
Sierra 5.3 Posted August 23, 2017 Posted August 23, 2017 Considering these are bigger than a 285/65/20, and everyone says those rub, I just don't see how it's feasible without some rub. Well the air dam is removed so that helps, but it looks like he has positive offset, so that hurts. I would say that it does rub somewhere. Probably on the rear inside of the front wheel liner.
2017_LTZ Posted August 23, 2017 Posted August 23, 2017 Just got my leveling kit in last night!! Cant wait till I install them over the weekend!! I decided to go with the 2.5" kit 1
THE_Engineer Posted August 23, 2017 Posted August 23, 2017 (edited) OK, I'll bite. Where do they rub? it rubs the sway bar at full lock. I cut the inner fender liner so there is no rub there Edited August 23, 2017 by THE_Engineer 1
math_10silverado Posted August 24, 2017 Posted August 24, 2017 anybody got picture with a 2in front and rear with stock tire size... im buying the rc 2.5 kit but i think it would look weird with stock tire at 2.5 so im thinking going with the 2in f/r like my old truck was
Bwoodkid Posted August 24, 2017 Posted August 24, 2017 anybody got picture with a 2in front and rear with stock tire size... im buying the rc 2.5 kit but i think it would look weird with stock tire at 2.5 so im thinking going with the 2in f/r like my old truck was This is a 2" front w/ factory tires. I don't think another .5" would look that bad. when time for tires just go up to a 33 1
math_10silverado Posted August 24, 2017 Posted August 24, 2017 you got the 2in at the back too??... i wont put tire on for a while since i got ko2 with the truck
Bwoodkid Posted August 24, 2017 Posted August 24, 2017 you got the 2in at the back too??... i wont put tire on for a while since i got ko2 with the truck No, just the fronts. Thought it would give you some idea of what it would look l like. My wranglers have 23K and about 10K left. cant wait to upgrade tires.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now