2014+ Leveling Kits

Daryl LBZ · January 1, 2017

After running the 1.5" blocks for about a week the suspension has settled and I still notice a squatting appearance. So I just ordered the 2" steel blocks with new U bolts and hope I get the stance I am looking for.

Sent from my iPhone using Tapatalk

Those tires and the height really set the truck off. Looks good.

Sidewayz · January 1, 2017

After running the 1.5" blocks for about a week the suspension has settled and I still notice a squatting appearance. So I just ordered the 2" steel blocks with new U bolts and hope I get the stance I am looking for.

Sent from my iPhone using Tapatalk

Truck looks great! What tires are those?

asalinasz39 · January 1, 2017

Thanks a lot guys! Theoretically I should be gaining only 1/2" but I went with a different brand of lift blocks so we shall see. I am excited and will post pics for you to see.

Factory Height: Front 36.75"

Rear 39.5"

After tires and leveling kit Front: 39 3/8"

plus 1.5 Blocks Rear 40"

Tires are Federal Couragia M/T 33 12.50 R20

They were $755 shipped to my home from Walmart. Comments vary on reviews as they used to have sidewall incidents. I took a risk as two of my local friends have been running them for two years already with no issues. What I gathered from them is that the old white wall Federals were the faulty ones and people were running them too low PSI. Anyways I will let you know with time but as of now I love them. They look great and ride great.

Edited January 1, 2017 by asalinasz39

jimmyboy8301 · January 1, 2017

After running the 1.5" blocks for about a week the suspension has settled and I still notice a squatting appearance. So I just ordered the 2" steel blocks with new U bolts and hope I get the stance I am looking for.

Sent from my iPhone using Tapatalk

looks perfect as it sits

Sent from my iPhone using Tapatalk

Sidewayz · January 2, 2017

Leveling kit is coming now I need a 33x12.50x22 set of tires. Not looking to pay 1800 for a set for my stock wheels to be used but I don't want to step down to a 20" wheel that I particularly don't like. Hmmmmmm

Waterfowler41 · January 2, 2017

After having the drivers side upper control arm stick and my passenger wheel stuck to the hub, I finally finished my 2" rough country install. My truck feels a lot more like my F150 Fx4 now.

If it wasn't for the two hang ups this kit should've taken me 2 hours.

I'd love to see those guys on the YouTube videos installing these kits, work on truck with 40-50k miles instead of those brand new, every bolt removes easily trucks.

Sent from my iPhone using Tapatalk

15BlueSilverado · January 2, 2017

14 silverado with 2.5 rough country leveling kit with 20x10 Hostile Sprocket wheels laced with 33x12.5r20 Nitto Ridge Grapplers. I did minor plastic cutting with no rub. I was told it couldn't be done and it was easily doneIMG_20161229_163643_472.jpg

Truck looks sick. Love the black wheels. I almost went with a 20x10 but I got no lift yet and my pockets are hurting right now. Lol

Sent from my SM-G930V using Tapatalk

woychc · January 2, 2017

2.5" front/ 3" rear blocks. LT285/60-20 duratracs

Sent from my iPhone using Tapatalk

Lalibert · January 2, 2017

2.5" front/ 3" rear blocks. LT285/60-20 duratracs

Sent from my iPhone using Tapatalk

What leveling kit did you use?

Sent from my iPhone using Tapatalk

woychc · January 2, 2017

What leveling kit did you use?

I used the MotoFab kits.

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Waterfowler41 · January 2, 2017

Alignment measurements after a Rough Country 2" level on my 14 Sierra

Sent from my iPhone using Tapatalk

disturbedgator · January 2, 2017

2017 z71 cc with 2.25 level and 285 65 r18 ko2s. Happy with it as I didnt want any rubbing and keep it reasonable. not bad for under 2k with level, wheels, and tires.

Edited January 2, 2017 by disturbedgator

asalinasz39 · January 3, 2017

After having the drivers side upper control arm stick and my passenger wheel stuck to the hub, I finally finished my 2" rough country install. My truck feels a lot more like my F150 Fx4 now.

If it wasn't for the two hang ups this kit should've taken me 2 hours.

I'd love to see those guys on the YouTube videos installing these kits, work on truck with 40-50k miles instead of those brand new, every bolt removes easily trucks.

Sent from my iPhone using Tapatalk

I had the motofab and attempted the self install and with only 500 miles on my 2017 the upper control arm on drivers side would not give so i took it to "one stop shop" and bammm they made me look like a wimp lol. I swear i was hitting it hard and have a BFH just like yours. Perhaps i was just nervous of working on a brand new truck.

Sent from my iPhone using Tapatalk

Waterfowler41 · January 3, 2017

I had the motofab and attempted the self install and with only 500 miles on my 2017 the upper control arm on drivers side would not give so i took it to "one stop shop" and bammm they made me look like a wimp lol. I swear i was hitting it hard and have a BFH just like yours. Perhaps i was just nervous of working on a brand new truck.

Sent from my iPhone using Tapatalk

I beat the shit out of the joint with a regular hammer then I remembered I had this bastard, literally one tiny tap and pop it free'd up. Passenger side popped out on its own free will.

Sent from my iPhone using Tapatalk

Lgetz · January 3, 2017

Here is a picture of the AT after having a 2.5 inch level kit with Bilstein 5100's set at 0 lift on the front and Toyo Open Country RT 33x12.5's on the stock AT 20's.