Jump to content

2014 Silverado Battery Replacement Problems

jamesok1

By jamesok1
in Troubleshooting & Recalls

 Share

Recommended Posts

Colossus Senior Enthusiast

Colossus

Posted
Posted

no it does not matter how you hooked it up. As long as positive went onto positive and negative onto negative.

  • Like 1
jamesok1 Enthusiast

jamesok1

Posted
  • Author
Posted

Thanks for the info fellas.

 

Well, last night I attempted to reset the bcm by unhooking the battery for a while. I then touched the 2 terminals together before reconnecting the battery. No luck.

 

I dropped my truck off at the dealer this morn and explained everything to the service advisor. I went and picked it up and they said I had a bad connection. Not too descriptive. The tech and service advisor I was working with were already gone so no more info than that. I plan on calling tomorrow to find out a little more. $143 total for 1 hour of labor. Feel like I dodged a bullet. Thanks for all the help. And tx-at glad your truck is back to working right.

  • Like 1
  • 2 months later...
Likes Enthusiast

Likes

Posted
Posted

James did you ever find out what the issue was? I'm having a similar problem. I just replaced the battery and my radio and speakers cut in and out for a couple minutes after starting the truck, then it clears up. Tried BCM reset with no luck

  • 1 year later...
  • 3 months later...
Anthony Young Enthusiast

Anthony Young

Posted
Posted

I have a 2014 silverado, replaced the battery back in November, every few weeks the truck acts like the alternator is going bad and the power steering gets tight and the lights would dim as i turn the wheel.  Went to my local auto zone to test the system, truck was dead and the guy there looked at the block on top shook it a bit and everything returned to normal, some how the main bolt going to the alt was loose tightened it all down and now no more issues with anything.  Maybe its a loose connection from moving everything around. 

  • 1 year later...
Graciemdimas1 New Member

Graciemdimas1

Posted
Posted

I replaced my battery now my truck won’t turn on the dashboard nothing what can it be 

this morning my truck didn’t turn on so they jump start and got to work and when was going to leave it didn’t turn on they check the battery and it was bad now idk what to do 

  • 7 months later...
JDB New Member

JDB

Posted
Posted

I have a 2017 2500.  Changed the battery now e brake light stays on, traction control light on and cruise control will not engage.  Do I need to reset something.  

  • 2 months later...
LvilleLoon New Member

LvilleLoon

Posted
Posted

I had the same issues as James when I replaced my battery.  After a closer inspection, I realized that I forgot to connect the plug that attaches to the distribution box on top of the battery.  Once I plugged that in, everything worked fine.  I’m guessing that might be the bad connection the dealership mechanic told him about.

  • Like 1
BeachTruckin69 New Member

BeachTruckin69

Posted
Posted

So in Response to everyone’s input. I had a similar problem which was due to a shitty mechanic(myself) replaced my battery and the truck(2014 GMC Sierra) started right up. After a day of driving dash lights started to flicker, stabilitrack earning came on, etc. the next morning truck sputtered lights flickered and it barely started. Trouble shot it the next day. Turns out I had a bad connection because I didn’t tighten one of the nuts enough on the electric manifold(whatever the god dam name of that is). After driving for a day it must’ve shook loose and cause intermittent current aka a shitty connection. 
Check your connection people. Then have a beer

  • Like 2
  • 1 month later...
Nigel Ystenes Enthusiast

Nigel Ystenes

Posted
Posted

I had the same problem, brought it in and they wiggled the battery terminal connection, tightened it more, wiggled the connection, tightened it, and all the sudden the fan, radio, and blinkers turned on.  

  • Like 1
  • 8 months later...
JGreene1984 New Member

JGreene1984

Posted
Posted

Had to replace my battery on a 2014 Silverado. After replacing it,it still wouldn’t start at all. After looking over all the cables I found the problem was that the positive cable was just loose enough to cause the issue. The T-bolt attachment on the positive lead wasn’t tightened all the way. Tightened it then the engine fired right up! Hope this helps someone else

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      OIL CONSUMPTION

      By Chuck FB · Posted

      First off pay close attention to what Newdude pasted as he is a GM tech !.    I have a couple of questions which might cross off some questions others on this forum would be wondering about as well. So when was the engine oil changed prior to this trip, was it almost brand new oil or did it already have a fair bit of use on it before you started the trip.   Did you check the oil level on flat ground and was it at the full mark just before leaving on this trip which I gather from google map is about 700 miles or so. Why I ask and this is not the first time in history that has happened, that either a dealer or some other shop changed the oil on the vehicle and the vehicle left the shop and the owner ( you ) assumed the engine oil was full but in reality the person who changed the oil simply did not put enough oil into the engine .. it happens !. Also that a shop put the wrong viscosity oil in and an engine was not happy with that thinner viscosity and oil got past the rings at a higher rate than the proper viscosity. Not to mention if there was any leaking out of a drain plug or the filter gasket etc. 
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      You could, although in the end it really doesn't make much difference what comes out in exact terms since it comes down to putting enough back in so that there is enough volume so that something flows back out once the trans is up to temp for the check procedure. I presume your putting a pan on that has a drain plug but its probably the same pan mold/size as at least a while back no extra volume pan was made for the gas truck version due to the exhaust cross over pipe issue. All I can say as per volume I put back in and this was based on changing out the filter as some is trapped in it that does not come out until its removed because of the way its made inside and my truck had sat over night with the trans having been hot when shut down and dripping internally before I pulled the pan. I went off of what the trans shop suggested as a minimum volume he found worked which was 9 1/2 quarts and I had enough flow out of the stand pipe that I knew I was right on the money once it slowed to a dribble and never wasted hardly any oil but it would be totally fine to throw in a full 10 quarts too. I guess personally I wouldn't ruin a perfectly good pan by drilling a hole in it, not with the cost of replacement pans up here or the dorman one anyway with the drain was 500.00 when I priced one out a while back, totally stupid.    I might not have said before but this trans oil type really expands with heat and I think its been said on this forum and the trans shop said the same so I wanted to try and hit the lower temp of the range vs at the top or go shooting above it as that would allow more oil to flow out which wouldn't be ideal. 
    • bruceb58
      Correct way to service 2024 l8t allison trans?

      By bruceb58 · Posted

      Since I am going to be replacing the pan, I am just going to drill a hole in the original to drain it so I will be able to catch the fluid easier and measure how much I took out.
    • bruceb58
      Installed Bilstein 5100's on my 2024 2500HD - Worth it - VIDEO + GIVEAWAY Inside

      By bruceb58 · Posted

      I checked...Amazon is better.
    • bruceb58
      Installed Bilstein 5100's on my 2024 2500HD - Worth it - VIDEO + GIVEAWAY Inside

      By bruceb58 · Posted

      For the front...yes.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...