Jump to content

Sun roof bellows problem

Mad Max

By Mad Max
in Troubleshooting & Recalls

 Share

Recommended Posts

Mad Max Enthusiast

Mad Max

Posted
Posted

The past couple times I opened and closed my sun roof on my 2014 Silverado a black rubber bellows like gasket about 1 foot long on the right side came out of its track and jammed it up preventing it from closing. I slipped it back in the first time but now it tore itself apart and I had to pull it out in order to close the sunroof. I'm assuming both sides are rotten at this point and need replacement. Seems like a very short life cycle to me seeing as I bought this new just a little over two years ago. I did get a full warranty so we'll see just what that was worth...

This appears to need to slide during normal operation. Might some silicone be necessary? What is it's purpose? Rain/noise or both? Is it even necessary?

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

The past couple times I opened and closed my sun roof on my 2014 Silverado a black rubber bellows like gasket about 1 foot long on the right side came out of its track and jammed it up preventing it from closing. I slipped it back in the first time but now it tore itself apart and I had to pull it out in order to close the sunroof. I'm assuming both sides are rotten at this point and need replacement. Seems like a very short life cycle to me seeing as I bought this new just a little over two years ago. I did get a full warranty so we'll see just what that was worth...

This appears to need to slide during normal operation. Might some silicone be necessary? What is it's purpose? Rain/noise or both? Is it even necessary?

Mostly cosmetic, just hides the guts of the sunroof tracks. My 08 did not even have anything, just exposed sunroof parts. The "bellows" on the 14 are kind of crap, the one on my drivers side kept falling off, so I just super glued it back into place. The same item on my 16 is a much better item, it is larger, so it covers more of the working parts, and fits a lot better. See if they can replace the pieces with the newer versions, overall better piece.

Mad Max Enthusiast

Mad Max

Posted
  • Author
Posted

Mostly cosmetic, just hides the guts of the sunroof tracks. My 08 did not even have anything, just exposed sunroof parts. The "bellows" on the 14 are kind of crap, the one on my drivers side kept falling off, so I just super glued it back into place. The same item on my 16 is a much better item, it is larger, so it covers more of the working parts, and fits a lot better. See if they can replace the pieces with the newer versions, overall better piece.

that's good to know thanks. It's raining hard so I picked up a couple new ones just in case. If it happens again I'll definitely try your idea or just go without! With my military ID I got them for 10% off. $30/each for crap. Turns out they're actually 3-1/2 years old now. Still a pretty short life span.

 

 

Sent from my iPhone using Tapatalk

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

that's good to know thanks. It's raining hard so I picked up a couple new ones just in case. If it happens again I'll definitely try your idea or just go without! With my military ID I got them for 10% off. $30/each for crap. Turns out they're actually 3-1/2 years old now. Still a pretty short life span.

 

 

Sent from my iPhone using Tapatalk

You are very welcome. I used the Gorilla Gel super glue, it was still holding when I traded the truck in.

KSTMSTR Enthusiast

KSTMSTR

Posted
Posted

I had the exact same problem on my 2014 High Country sunroof. The bellows piece of rubber on the passenger side would constantly come loose, and fall off.

 

A little bead of clear Gorilla Glue fixed it. With that said, you'd think that for a $50k truck, little crap like this wouldn't be an issue.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

I had the exact same problem on my 2014 High Country sunroof. The bellows piece of rubber on the passenger side would constantly come loose, and fall off.

 

A little bead of clear Gorilla Glue fixed it. With that said, you'd think that for a $50k truck, little crap like this wouldn't be an issue.

Yea, I agree. I had to glue the seat cover on my 16 back in place. There are two plastic tracks that hold the cover onto the seat frame, they came loose, some Gorilla glue and no more problems. The sunroof pieces really serve no purpose, seems like they would use some sort of adhesive at least to keep it in place.

nitro882 Enthusiast

nitro882

Posted
Posted

I used some black 3M weatherstrip adhesive on my 14 to keep them in place. Been good for 2 years now.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

I used some black 3M weatherstrip adhesive on my 14 to keep them in place. Been good for 2 years now.

Good thinking, what type of container/tube does it come in?

nitro882 Enthusiast

nitro882

Posted
Posted

Good thinking, what type of container/tube does it come in?

It comes in what looks like a toothpaste tube. You can get it at autozone/advance etc.

 

looks like this.

Z-6K_xfo5oy.JPG

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

It comes in what looks like a toothpaste tube. You can get it at autozone/advance etc.

 

looks like this.

Z-6K_xfo5oy.JPG

Thanks for the info.
  • 2 years later...
EddieRWB New Member

EddieRWB

Posted
Posted

Not to resurrect an old topic.. but I'm wondering if anyone has a photo of these bellows when installed correctly? On my 14 all terrain serria both sides the bellows are hanging down, so I dont have a reference on what it should look like when install correctly with glue or weather stripping. I've googled around looking for a video or pics and have come up empty. If anyone has a photo of what these look like functioning on the sunroof and could share that, it would be great. Thank you.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
1 hour ago, EddieRWB said:

Not to resurrect an old topic.. but I'm wondering if anyone has a photo of these bellows when installed correctly? On my 14 all terrain serria both sides the bellows are hanging down, so I dont have a reference on what it should look like when install correctly with glue or weather stripping. I've googled around looking for a video or pics and have come up empty. If anyone has a photo of what these look like functioning on the sunroof and could share that, it would be great. Thank you.

Welcome to the site.

 

They changed them after the poor design in the 14's.

There is a "track" on the edge of the bellow, you have to slide it along the edge of the sunroof glass, and if memory serves right, they will never stay in place, unless you "adhere" them back in place.

I would honestly see if you can order a new set from a 16 up, much better fit, they hide all of the inner workings of the sunroof tracks and stay in place.

The ones you are dealing with are almost and after thought for a design.

 

  • 1 year later...
JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
3 hours ago, bjlevant said:

This piece has torn on my 2017 Tahoe. Any ideas where to source a new one? Dealer wants $350 to replace it lol.

Welcome to the site.

 

Did you ask them for the part number?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • PunchT37
      OCI, not when but why?

      By PunchT37 · Posted

      Hmm. A real reason to not just use the odometer to determine OCI?    
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • StingerZ16
      Roll up bed cover experiences

      By StingerZ16 · Posted

      I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...