Jump to content

Sun roof bellows problem

Mad Max

By Mad Max
in Troubleshooting & Recalls

 Share

Recommended Posts

Mad Max Enthusiast

Mad Max

Posted
Posted

The past couple times I opened and closed my sun roof on my 2014 Silverado a black rubber bellows like gasket about 1 foot long on the right side came out of its track and jammed it up preventing it from closing. I slipped it back in the first time but now it tore itself apart and I had to pull it out in order to close the sunroof. I'm assuming both sides are rotten at this point and need replacement. Seems like a very short life cycle to me seeing as I bought this new just a little over two years ago. I did get a full warranty so we'll see just what that was worth...

This appears to need to slide during normal operation. Might some silicone be necessary? What is it's purpose? Rain/noise or both? Is it even necessary?

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

The past couple times I opened and closed my sun roof on my 2014 Silverado a black rubber bellows like gasket about 1 foot long on the right side came out of its track and jammed it up preventing it from closing. I slipped it back in the first time but now it tore itself apart and I had to pull it out in order to close the sunroof. I'm assuming both sides are rotten at this point and need replacement. Seems like a very short life cycle to me seeing as I bought this new just a little over two years ago. I did get a full warranty so we'll see just what that was worth...

This appears to need to slide during normal operation. Might some silicone be necessary? What is it's purpose? Rain/noise or both? Is it even necessary?

Mostly cosmetic, just hides the guts of the sunroof tracks. My 08 did not even have anything, just exposed sunroof parts. The "bellows" on the 14 are kind of crap, the one on my drivers side kept falling off, so I just super glued it back into place. The same item on my 16 is a much better item, it is larger, so it covers more of the working parts, and fits a lot better. See if they can replace the pieces with the newer versions, overall better piece.

Mad Max Enthusiast

Mad Max

Posted
  • Author
Posted

Mostly cosmetic, just hides the guts of the sunroof tracks. My 08 did not even have anything, just exposed sunroof parts. The "bellows" on the 14 are kind of crap, the one on my drivers side kept falling off, so I just super glued it back into place. The same item on my 16 is a much better item, it is larger, so it covers more of the working parts, and fits a lot better. See if they can replace the pieces with the newer versions, overall better piece.

that's good to know thanks. It's raining hard so I picked up a couple new ones just in case. If it happens again I'll definitely try your idea or just go without! With my military ID I got them for 10% off. $30/each for crap. Turns out they're actually 3-1/2 years old now. Still a pretty short life span.

 

 

Sent from my iPhone using Tapatalk

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

that's good to know thanks. It's raining hard so I picked up a couple new ones just in case. If it happens again I'll definitely try your idea or just go without! With my military ID I got them for 10% off. $30/each for crap. Turns out they're actually 3-1/2 years old now. Still a pretty short life span.

 

 

Sent from my iPhone using Tapatalk

You are very welcome. I used the Gorilla Gel super glue, it was still holding when I traded the truck in.

KSTMSTR Enthusiast

KSTMSTR

Posted
Posted

I had the exact same problem on my 2014 High Country sunroof. The bellows piece of rubber on the passenger side would constantly come loose, and fall off.

 

A little bead of clear Gorilla Glue fixed it. With that said, you'd think that for a $50k truck, little crap like this wouldn't be an issue.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

I had the exact same problem on my 2014 High Country sunroof. The bellows piece of rubber on the passenger side would constantly come loose, and fall off.

 

A little bead of clear Gorilla Glue fixed it. With that said, you'd think that for a $50k truck, little crap like this wouldn't be an issue.

Yea, I agree. I had to glue the seat cover on my 16 back in place. There are two plastic tracks that hold the cover onto the seat frame, they came loose, some Gorilla glue and no more problems. The sunroof pieces really serve no purpose, seems like they would use some sort of adhesive at least to keep it in place.

nitro882 Enthusiast

nitro882

Posted
Posted

I used some black 3M weatherstrip adhesive on my 14 to keep them in place. Been good for 2 years now.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

I used some black 3M weatherstrip adhesive on my 14 to keep them in place. Been good for 2 years now.

Good thinking, what type of container/tube does it come in?

nitro882 Enthusiast

nitro882

Posted
Posted

Good thinking, what type of container/tube does it come in?

It comes in what looks like a toothpaste tube. You can get it at autozone/advance etc.

 

looks like this.

Z-6K_xfo5oy.JPG

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

It comes in what looks like a toothpaste tube. You can get it at autozone/advance etc.

 

looks like this.

Z-6K_xfo5oy.JPG

Thanks for the info.
  • 2 years later...
EddieRWB New Member

EddieRWB

Posted
Posted

Not to resurrect an old topic.. but I'm wondering if anyone has a photo of these bellows when installed correctly? On my 14 all terrain serria both sides the bellows are hanging down, so I dont have a reference on what it should look like when install correctly with glue or weather stripping. I've googled around looking for a video or pics and have come up empty. If anyone has a photo of what these look like functioning on the sunroof and could share that, it would be great. Thank you.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
1 hour ago, EddieRWB said:

Not to resurrect an old topic.. but I'm wondering if anyone has a photo of these bellows when installed correctly? On my 14 all terrain serria both sides the bellows are hanging down, so I dont have a reference on what it should look like when install correctly with glue or weather stripping. I've googled around looking for a video or pics and have come up empty. If anyone has a photo of what these look like functioning on the sunroof and could share that, it would be great. Thank you.

Welcome to the site.

 

They changed them after the poor design in the 14's.

There is a "track" on the edge of the bellow, you have to slide it along the edge of the sunroof glass, and if memory serves right, they will never stay in place, unless you "adhere" them back in place.

I would honestly see if you can order a new set from a 16 up, much better fit, they hide all of the inner workings of the sunroof tracks and stay in place.

The ones you are dealing with are almost and after thought for a design.

 

  • 1 year later...
JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
3 hours ago, bjlevant said:

This piece has torn on my 2017 Tahoe. Any ideas where to source a new one? Dealer wants $350 to replace it lol.

Welcome to the site.

 

Did you ask them for the part number?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • 81mmcat
      Higher oil pressure after DFM shut off

      By 81mmcat · Posted

      Can anyone explain why the oil pressure runs higher after the DFM is shut off?  just installed the Pulsar Lt.
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks!  I figured as such; GM and other manufacturers have used standard parts and harnesses across trim levels and such for decades.  I pulled the blank accessory cover off of my commuter van (a 2016 or so Chevy 15-passenger) years ago and found the plug for a USB outlet.  It wasn't connected to anything, though (I tried swapping in an outlet from another van).  I was a GM Tech years ago (late-90s) and was pretty familiar with my 2006.  I might be wrong, but I view newer vehicles (pretty much anything made in the past 20 years) as being a lot more plug and play.  Meaning, more unused wires and plugs unless you have the Mack Daddy of vehicles.    
    • Coastie05
      It's Been a Long Time...

      By Coastie05 · Posted

      Welcome back!
    • davester
      New to Me 2010 SLE (Quirks, Issues)

      By davester · Posted

      not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...