Jump to content

Recommended Posts

Posted
22 minutes ago, Bernard Sarazin said:

20181231_142544.jpg

Hmm. Hope mounting that bar the way you did with that strapping doesnt let it shake like hell. 

Posted

Most people just used a piece of angle iron, bolted it to the brace, then bolted the light bar to the angle iron.

Posted

Probably the only way to do it is remove the blue assembly, and install a red one.... sorry. I have my factory switch at home. When i get home, ill take it apart. Maybe you can unsoldier the led and install a red led. .

Posted
has anyone changed the blue orl factory switch from blue to red?

Yep. Just order a red switch :). I went back and forth and decided to keep all blue.


Sent from my iPhone using Tapatalk
Posted
20 minutes ago, pgamboa said:


Yep. Just order a red switch :). I went back and forth and decided to keep all blue.


Sent from my iPhone using Tapatalk

well if the red one was 25$ and not over 100$ I would do that in a heart beat,

Posted
well if the red one was 25$ and not over 100$ I would do that in a heart beat,

Ah gotcha.


Sent from my iPhone using Tapatalk
Posted

What part does this change?  Is it for all the knobs to be red/blue?  I have red and would like them all blue.  If this is what does the trick, maybe we can swap.

  • Like 1
Posted
What part does this change?  Is it for all the knobs to be red/blue?  I have red and would like them all blue.  If this is what does the trick, maybe we can swap.

The circular backlit illumination of the knob.

255c0b1e2e6c68a20fbde2e8e25d85aa.jpg


Sent from my iPhone using Tapatalk
Posted
55 minutes ago, pgamboa said:

b7164b6b964f73d00031f6a2730b86bf.jpg


Sent from my iPhone using Tapatalk

Would this change them all?  If it does, then maybe Sierra and I can switch.  ?

Posted
5 hours ago, BluEyeItln said:

What part does this change?  Is it for all the knobs to be red/blue?  I have red and would like them all blue.  If this is what does the trick, maybe we can swap.

Is the ac controls and the radio controls red also? Id be up for a swap!

Posted
31 minutes ago, RACERX7775 said:

Is the ac controls and the radio controls red also? Id be up for a swap!

Yep my knobs are all red.  They are red but the picture show it so well.

20190102_163539.jpg

20190102_161639.jpg

Posted
28 minutes ago, BluEyeItln said:

Yep my knobs are all red.  They are red but the picture show it so well.

20190102_163539.jpg

20190102_161639.jpg

Looks like it to me. We should pm on how to coordinate this. Its $14 for a flat rate box me to you. 

20190102_174734.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • are there any codes? with lots of rust, perhaps disconnect/clean both sides of the connection/examine cable ends (the wires) for corrosion going into the sheath & replace if necessary/reconnect ALL the power AND ground cables between the battery, engine, frame, cab, fuse box and starter charm.li (website) has a no-start diagnostic procedure you can work through to get it working.
    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...