Jump to content

Recommended Posts

Posted

Picked up my 2020 6.2 LT Trailboss Monday 

Tuesday I did 5% all the way around, taillight tint, and hit the fogs. I also added gloss black exhaust tips 

IMG_6462.jpg

IMG_6464.jpg

  • Like 7
Posted (edited)

2020 WT CC 5.3 Regular Bed 4x4, NFab nerf step, Westin Black E series bull bar, Truxedo Truxport Soft Roll Up. StormTrooper Edition.

20200926_172105.jpg

Edited by chevinator
  • Like 4
Posted

Took it out to play in the PA back roads. Found some trails in the woods to play on. 

 

spacer.png

 

spacer.png

 

spacer.png

 

spacer.png

 

 

  • Like 4
Posted

Got my truck back from the dealership today. They installed the light bar you can purchase through GM Accessories. It's bright, and has more features than I thought it would, but I'm a bit disappointed in how think it is, especially in relation to the truck and the sport bar it sits on. I thought it would be at least twice the thickness (top to bottom) than what it actually is.4d3c0bbb27060e267b5cd0e7d242de2e.jpgf4a40c3b4496f26682b1f64af83086e2.jpg912534c15996e8938e9592e7c08d1f95.jpg

Sent from my SM-N960U using Tapatalk

Posted (edited)
2 hours ago, firefighter907 said:

Just hiding out in the wash bay.

20200928_121326.jpg

Brings back memories of my childhood, where we washed my dad’s vehicles at the VFD as well. And next to an old Studebaker like this, too! ????
 

ETA: might be a Seagrave. My antique fire engine skills are rusty. ?
 

Edited by econometrics
  • Like 1
Posted
31 minutes ago, econometrics said:

Brings back memories of my childhood, where we washed my dad’s vehicles at the VFD as well. And next to an old Studebaker like this, too! ????
 

ETA: might be a Seagrave. My antique fire engine skills are rusty. ?
 

Winner!! It's a 1935 Seagrave. It actually belonged to our dept when it was new.

  • Like 1
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,913
    Total Members
    8,960
    Most Online
    Smitty462
    Newest Member
    Smitty462
    Joined
  • Who's Online   5 Members, 1 Anonymous, 698 Guests (See full list)


  • Latest Articles

  • Posts

    • Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...