Jump to content

Recommended Posts

Posted

Got mine back Friday 21st of December and no leaks after the replacement rear window. GM is placing the affected vehicles on a numbered list based on time of report of leak. I was one of the first reported cases and it took 39 days to get my truck back. Depending on how many are in front of you, it could be quite a while judging from my experience. As outrag 1 stated, be loud, but be civil. I would remind the dealership to do everything in their power to make you happy since 1. GM is paying for the repair and loaner vehicle and 2. They may like your repeat business. Also, be sure to get it on the record with GM Customer Service. Water damage is no joke, so be sure to let the dealership know that you want to inspect the truck, while they have it torn down, for damage. They will have to remove the rear seats and seat backs to replace the rear window assembly. It’s a perfect time to inspect for rust, mild and mildew. 

  • 4 weeks later...
Posted (edited)

Had not heard about this issue for a while so I thought I was safe.  Not.   Leaking on top passenger side.  Headliner is wet like previous pictures.  Water is dripping onto top of seat.

Bummer

Edited by O Town Denali
Posted
2 hours ago, O Town Denali said:

Had not heard about this issue for a while so I thought I was safe.  Not.   Leaking on top passenger side.  Headliner is wet like previous pictures.  Water is dripping onto top of seat.

Bummer

Sorry to hear of another GM customer experiencing this leak issue. I have to admit, I was very upset about it. However, GM did fix the issue and no further problems. Can’t say the same for other makes I have owned. Hang in there, I’m confident they will get yours right also. 

Posted

It sucks that this is happening to so many people.  On the bright side, it does look like GM is taking care of it and has taken steps to fix the issue.  Since my back window was replaced I haven't had any issues.  I contacted GM about all the trouble and they gave me a certificate for accessories, paid for my nudge bar.

50494116_10205255836991547_8162696516981489664_o.jpg

  • Like 2
Posted

As indicated in my previous posts I had a leak as well.

 

I took my truck to the dealer on 1/5/19 and got it back on 1/15/19.

 

My dealer did not replace the window. They re-set my current one. Didn't really care as long as it doesn't leak.

 

While detailing the interior of my truck after getting it back I discovered a large gouge in the plastic kick panel on the drivers side back seat area that they damaged while removing and re-installing the back seats. I also found some minor paint chips under the back glass.

 

In addition, after I picked it up, I kept hearing something roll around the dash area every time I turned. Thought it was the key FOB but after eliminating that possibility I found a loose interior screw rolling around the dash board storage area. Then I found another one in the center console rear cup holder. Then, predictably, I started hearing a squeak from the rear seat area after hitting any bumps...assuming it's the two missing interior screws I found. I expected that stuff when I was 16 and my friend and I took apart my dash to install a radio and had left-over screws when we finished but not when I take my truck to a dealer. These are supposed to be professionals.

 

To make matters worse, after the first rain storm, my truck leaked again!

 

Took it back to the dealer and told my service adviser that everyone I know who has had this problem had their windows replaced, not re-sealed.

 

He called a few days ago and claims GM will not sign off on a window replacement. He claims they found the leak and sealed it. Sure...like they did the first time. Now they are waiting on the kick panel to come in that they damaged.

 

On a side note, prior to taking my truck in the first time, I messaged the GMCustomerService guy who sometimes responds to posts offering to work in conjunction with the dealer as an additional layer of support. No offense, seems like a nice guy, but other than e-mailing the dealership's 'customer experience manager' I don't really know what else they do. It doesn't seem to have helped my situation at all. 

 

I really do love the truck but this ordeal is sucking the joy out of the ownership experience.

Posted
7 minutes ago, fish_guru said:

As indicated in my previous posts I had a leak as well.

 

I took my truck to the dealer on 1/5/19 and got it back on 1/15/19.

 

My dealer did not replace the window. They re-set my current one. Didn't really care as long as it doesn't leak.

 

While detailing the interior of my truck after getting it back I discovered a large gouge in the plastic kick panel on the drivers side back seat area that they damaged while removing and re-installing the back seats. I also found some minor paint chips under the back glass.

 

In addition, after I picked it up, I kept hearing something roll around the dash area every time I turned. Thought it was the key FOB but after eliminating that possibility I found a loose interior screw rolling around the dash board storage area. Then I found another one in the center console rear cup holder. Then, predictably, I started hearing a squeak from the rear seat area after hitting any bumps...assuming it's the two missing interior screws I found. I expected that stuff when I was 16 and my friend and I took apart my dash to install a radio and had left-over screws when we finished but not when I take my truck to a dealer. These are supposed to be professionals.

 

To make matters worse, after the first rain storm, my truck leaked again!

 

Took it back to the dealer and told my service adviser that everyone I know who has had this problem had their windows replaced, not re-sealed.

 

He called a few days ago and claims GM will not sign off on a window replacement. He claims they found the leak and sealed it. Sure...like they did the first time. Now they are waiting on the kick panel to come in that they damaged.

 

On a side note, prior to taking my truck in the first time, I messaged the GMCustomerService guy who sometimes responds to posts offering to work in conjunction with the dealer as an additional layer of support. No offense, seems like a nice guy, but other than e-mailing the dealership's 'customer experience manager' I don't really know what else they do. It doesn't seem to have helped my situation at all. 

 

I really do love the truck but this ordeal is sucking the joy out of the ownership experience.

You need to take your truck back to the dealership and make them fix it!  Document all of those things and go straight to the service manager and show him.  They need to replace that window, period.  The windows that are leaking a defective, they can't be repaired.  Once it's back in the service department I would be sure to call Chevy and let them know.

Posted
39 minutes ago, fish_guru said:

As indicated in my previous posts I had a leak as well.

 

I took my truck to the dealer on 1/5/19 and got it back on 1/15/19.

 

My dealer did not replace the window. They re-set my current one. Didn't really care as long as it doesn't leak.

 

While detailing the interior of my truck after getting it back I discovered a large gouge in the plastic kick panel on the drivers side back seat area that they damaged while removing and re-installing the back seats. I also found some minor paint chips under the back glass.

 

In addition, after I picked it up, I kept hearing something roll around the dash area every time I turned. Thought it was the key FOB but after eliminating that possibility I found a loose interior screw rolling around the dash board storage area. Then I found another one in the center console rear cup holder. Then, predictably, I started hearing a squeak from the rear seat area after hitting any bumps...assuming it's the two missing interior screws I found. I expected that stuff when I was 16 and my friend and I took apart my dash to install a radio and had left-over screws when we finished but not when I take my truck to a dealer. These are supposed to be professionals.

 

To make matters worse, after the first rain storm, my truck leaked again!

 

Took it back to the dealer and told my service adviser that everyone I know who has had this problem had their windows replaced, not re-sealed.

 

He called a few days ago and claims GM will not sign off on a window replacement. He claims they found the leak and sealed it. Sure...like they did the first time. Now they are waiting on the kick panel to come in that they damaged.

 

On a side note, prior to taking my truck in the first time, I messaged the GMCustomerService guy who sometimes responds to posts offering to work in conjunction with the dealer as an additional layer of support. No offense, seems like a nice guy, but other than e-mailing the dealership's 'customer experience manager' I don't really know what else they do. It doesn't seem to have helped my situation at all. 

 

I really do love the truck but this ordeal is sucking the joy out of the ownership experience.

This is not encouraging.  You did not bring it to a dealer in Orlando by any chance did you?

Posted

Any idea of build dates of trucks with leaks? Has GM resolved this, or could current production trucks still have a problem?

 

Posted
1 minute ago, allison said:

Any idea of build dates of trucks with leaks? Has GM resolved this, or could current production trucks still have a problem?

 

I can't answer that first question but I have heard that GM got a new supplier due to these problems so it should not effect current production trucks. 

Posted

So far my 08/18 build hasn’t leaked, I’ll check again Tuesday when it rains again here in Joisey.

Posted
5 hours ago, Demon said:

It sucks that this is happening to so many people.  On the bright side, it does look like GM is taking care of it and has taken steps to fix the issue.  Since my back window was replaced I haven't had any issues.  I contacted GM about all the trouble and they gave me a certificate for accessories, paid for my nudge bar.

50494116_10205255836991547_8162696516981489664_o.jpg

Does your nudge bar interfere with the sensors?

 

Posted

I will add that I go through a automatic high pressure car was a couple of times a week and I haven’t noticed any water leaks after going through.

Posted
9 hours ago, jkbronco said:

Does your nudge bar interfere with the sensors?

 

I don't have parking sensors. 

Posted

Automotive prices continue to Rise, while Quality Declines.

The simple fact of the matter is that vehicles are not truly tested enough before being released into production.

Or, assembly lines are relying more on robots to perform repetitive tasks. Robots are not good at quality control however.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...