Jump to content

Rear window leak

Demon
 Share

Recommended Posts

TFB Enthusiast

TFB

Posted
Posted

Just wanted to give everyone a heads up that it is possible to financially get out of the truck.

 

I bought a ‘20 LT TB back in January ... rear window started leaking in February and was fixed per TSB.  In August, started leaking again.  Instead of going back to the dealer, I started emailing Ram/Toyota/Ford dealers and was able to make a deal for a new Ram Big Horn Night Edition.  Very comparable to the TB minus the “off road” features.  My TB was a lease with 5k miles on the odometer.  The payoff was $43k and the Ram dealer gave me $45k.

 

I realize some people have brand loyalty, but if you aren’t and don’t feel like dealing with trips to the dealer or gambling on your state’s lemon law, you can get out of the truck and not be upside down.

  • Replies 3.5k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Rocz3cqg
Rocz3cqg

Sliding Glass or / and Stop Light Module reported Leaking Situation             Contacts

ShamrockShooter
ShamrockShooter

Well my 2019 early build leaker was replaced with 2020 hopefully not leaker. No signs of an leaks on the window or headliner of the 2020 so fingers crossed. Very impressed with the 10 speed after th

Thomcat
Thomcat

No leaker here so can't do a 100% verification, but the problem seems to be with the spoiler design, regardless of weather the sealer leaks or not, and any cracks in the trim make it worse.  

Posted Images

econometrics Senior Enthusiast

econometrics

Posted
Posted
36 minutes ago, Back in Black AT4 said:

Still no leak here on my 2020 AT4 (Feb 2020 build date) and I've been blasting it weekly with the pressure washer when washing the truck...

From my 18 months of experience... it’s not the high pressure or density water applications that cause leaking. Instead, it’s the slow, consistent soaker scenarios. (Eg a light 2 hour rain fall), etc. 
 

YMMV. 

  • Like 2
SilveradoRST Enthusiast

SilveradoRST

Posted
Posted (edited)
On 9/27/2020 at 11:54 PM, econometrics said:

From my 18 months of experience... it’s not the high pressure or density water applications that cause leaking. Instead, it’s the slow, consistent soaker scenarios. (Eg a light 2 hour rain fall), etc. 
 

YMMV. 

Yup, I ditto this.  That's my experience as well.  

Edited by SilveradoRST
Grammar
  • Like 2
Duramaxsky Enthusiast

Duramaxsky

Posted
Posted

I hope I have the new window. Mine is a recent build. I didn't want the sliding rear window anyway. It's basically useless.

Sent from my SM-A505U using Tapatalk

UGADawgs Enthusiast

UGADawgs

Posted
Posted
6 hours ago, econometrics said:

From my 18 months of experience... it’s not the high pressure or density water applications that cause leaking. Instead, it’s the slow, consistent soaker scenarios. (Eg a light 2 hour rain fall), etc. 
 

YMMV. 

this exactly!

  • Like 1
Monk77 New Member

Monk77

Posted
Posted

So yes. Just got my truck back and it was apparently leaking from a body seam. Pull out the headliner and there’s a bar welded in at the seam. They just sealed it more, so far so good. 

Booma1218 Enthusiast

Booma1218

Posted
Posted

I was thinking of adding the rear slider to my 2020 LT Trail Boss,but after reading through all of this I’m glad mine didn’t come with the rear slider...What a bunch of bullshit!!!! 40 plus K for our trucks and we have to deal with this bullshit??GM obviously knows about the issue and could give 2 ******...They really need to get there ****** together and fix every single one of these trucks that are having the leak problem...Totally unacceptable 

Pate Services Enthusiast

Pate Services

Posted
Posted (edited)

I started a similar thread in the 2020HD forum before I realized how common of a problem is. This is my latest.

So today was the day my truck went in to get the second replacement window installed. They informed me they found a gap in the top bead of sealant that was from the last install. Rather than replace the window as planned to correct the flaw they dropped the headliner and pulled the spoiler. They put a thick bead of sealant along the top just like they did in the first repair attempt. Best part is they ran it though their car wash to leak test it and they crushed my passenger side mirror. Truck now needs whole new mirror. 

Edited by Pate Services
Spelling
econometrics Senior Enthusiast

econometrics

Posted
Posted
2 hours ago, Pate Services said:

I started a similar thread in the 2020HD forum before I realized how common of a problem is. This is my latest.

So today was the day my truck went in to get the second replacement window installed. They informed me they found a gap in the top bead of sealant that was from the last install. Rather than replace the window as planned to correct the flaw they dropped the headliner and pulled the spoiler. They put a thick bead of sealant along the top just like they did in the first repair attempt. Best part is they ran it though their car wash to leak test it and they crushed my passenger side mirror. Truck now needs whole new mirror. 

This is (unfortunately) exactly why I stopped taking mine to the dealer, even though I still have a slight leak. It’s just not worth the hassle and dealing with these noodle-brained halfwits. 

  • Like 1
JR09country Enthusiast

JR09country

Posted
Posted

I still haven't taken mine in, i just dont want to deal with the hassel when i know nothing will work at this point. I need to start doing research on a none sliding window and just pay for it myself and be done with it.

Sent from my ONEPLUS A6013 using Tapatalk

  • Like 1
Dali555 Enthusiast

Dali555

Posted
Posted

Add another one... 2020 AT4 built in Sept/Oct of 2019... thought I was good but now at just over 11K miles it’s got a slight leak in the drivers side... this is not gonna make me happy going through all this crap now... B7A8C78E-BD8C-455A-8621-0F8597C86CF2.jpeg.87f0446a7a60ebfdf9da145e11c80985.jpeg74D4C30B-97D8-4068-A9DF-E77E299A4D5E.jpeg.6201c01174815c9965cc801ab85d250b.jpeg

JAP90 Enthusiast

JAP90

Posted
Posted
On 9/22/2020 at 4:49 PM, econometrics said:

Sorry you've had this crappy experience, like the rest of us have. 

 

I've just learned to live with my leaking rear. I took it in the first time, had the sealant applied, and it seemed to slow the occurrence of the leaks. After reading stories just like yours - where owners keep bringing their trucks in over and over for more "fixes", I just decided to put a towel between my rear window and my seat, forget about leak and move on. I can honestly say I barely think about it anymore, and I enjoy the truck again. The best part has been staying away from days/weeks messing with this at my dealer - with no end in sight. 

 

Probably not the best, but I've moved into the "acceptance" stage of grief. ? 

I would be careful with this approach. I too had towels behind the seats from the second day of owning it, and spent 4 months looking for the leak to run off the side of the slider track. However, my first leak was in the far corner of the window and if I had not looked back there with a flashlight diagonally, I would have never seen it. It was behind the trim coving the rear seat belt. A towel won't fit back there without removing the trim. Just FYI. Watch back there, too.

  • Like 1
Donnie Summers Enthusiast

Donnie Summers

Posted
Posted (edited)

Ok I hope I do not jinx myself, I have a 2020 GMC Sierra SLT 3400 miles with back slider window E9, Truck was made in Mexico build date 1/20, I have used the slider window many times, I looked for hair line cracks and did not find any, Also removed the rear seat belt cover and inspected, I went out a little while ago and soaked the window for a good 5 min and inspected again and no leaks, would it be possible I got one that may not leak or is it inevitable it will leak? Jus wundering if I should pull the spoiler and do the bead of seal across the top...  I would jus thought that all these trucks sold that if all leaked there would be a recall or class action suit... Thanks for your replies in advance....

Edited by Donnie Summers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   3 Members, 0 Anonymous, 1,060 Guests (See full list)

  • Latest Articles

  • Posts

    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Yes that's right, it's the upgrade that includes the overload spring and all that stuff.   Someday when I'm empty and going by a scale I'm going to stop in and get some weight readings.   Exactly  you should have the ability to change individual settings, in in Canada so I'm driving with kph but then I'm stuck with kpa when I want psi lol    
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      You must have that upgraded gvw package which is only available or at least was in 2025 with the diesel engine for the 3/4 ton and that gave the truck physically the larger 12.0 ring gear rear diff and the 3500 rear spring pack. There is a difference in what the diff housing looks like externally as one tell tale and also your truck should have the upper overload spring pack and the frame pads that the pack goes up against.    The pressure the tpms system kicks the alarm in on a stock setting truck, that is a good question and was just from what I recall but I doubt I made any notes on it as I knew for the rear that it was not at all what I was after regardless either. Being that you have a diesel and if running on stock tires the minimum pressure on an empty truck seems to be around 50 psi from hearing of those that have weighted the front axle but the rear axle is very similar in weight to a gas truck and again a near empty truck on the rear could go down to 35 pounds at minimum. However the weigh scale is the proper way to know for sure as a guide.    As to changing the readings on the dash from metric to the US measuring system, oh yes that is done easily but what I was attempting to explain was that I can't pick and choose items I want to have in US and those I still want in the metric system at the same time as its either all or none. For example lets say you drove into Canada and switched your dash over to metric so your speedometer read in km an hour, well then your reading kilopascals on your tpms readout and your wife looks over and says what the hell is that saying in the tpms screen and you say "darned if I know, I think its Chinese" !
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      This is partly why I decided to have switched over to Amsoil SS as a way of hopefully preventing the buildup of the sludge/carbon on the pistons and clogging of the oil control rings and the carbon that would cause the compression rings to stick in their grooves as well as stay cleaner up top of the heads in the valve train in the first place, an oil that has tested better by third party testing over typical shelf oil and also doing my best to run relatively short OCI. However in saying that I don't think there is any way to easily prove the oil I was using prior allowed for a buildup at the OCI I was doing, nor in the other direction to make claims the Amsoil is keeping everything clean either. There really isn't a window into the engine is there to know anything for certain even if oil samples were taken for example that showed still healthy oil being dropped out of the oil pan other than engine tear downs that extensive and expensive testing of oils does to actually visually see what is really going on inside the engine. I wish there was some easy method of seeing what is going on but I don't happen to be aware of that if there is.  
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      My truck is a ¾ ton but my placard also says 80 for the rear tires, I think I might have the upgraded suspension to the 3500 series maybe.   I put my air down to 60 and the light was still on, and there was no way I was putting over 60 psi in the rear empty and not towing because I knew the actual number Toyo gave me and I didn't wanna ruin the center of my tires!   And you actually can change it in the settings from metric or is and it will show kph or mph then when you go into your tire settings it will be either psi or kpa, but it would be nice to just change it directly on the tire psi page 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...