Jump to content

Recommended Posts

  • 2 weeks later...
Posted

Had my AT4 serviced today and they reprogrammed BCM according to service bulletin # PIT5651B.  This also supposedly fixes the climate control showing off on the screen when it's on. 

  • 4 months later...
Posted

Same message on my 2019 AT4 comes on when I turn the truck off. Took it to the dealer and they replaced the module and reprogramed it. It was fine for a few days and its back on again. I guess I will be taking it back.  Service writer acted like he has never heard of it.  

Posted

This happened to me 3-4 days ago. About 1400 miles on the truck.  (2020 Silverado 3.0). While waiting in the 40-minute line to exit the parking garage at work — was on the decline from 3rd floor to 2nd floor. I put the truck in park, and could not get it out of park when the line moved again.  No amount of rotating the steering wheel (it moved freely) helped. I shut off/restarted the truck. Still stuck. (Started to get nervous at this point). I released the brake pedal and pressed it to the floor. No good. 
 

Finally, I turned on the parking brake, that freed it instantly (also, I prayed). Thank God, otherwise there would have been a massive amount of teed-off people stuck behind me waiting on a tow. 
 

There were no warning lights. I had remote-started the truck with the key fob (not the app). 

 

Has not happened since, but this morning, on start up on level ground, the “service steering column lock” warning appeared on the DIC for 2 seconds and disappeared. No other symptoms, just the warning. 
 

If I take it in now, pretty sure the dealer “won’t be able to replicate,” and it’ll be a big waste of time.

Posted

Just had this thing lock up on me again. Stopped at a light in traffic, put the truck in park so that I could pick up something that had fallen on the passenger-side floor. Stupid, stupid, stupid move. 
 

Truck would not go back into drive! Steering wheel moved freely, no amount of cycling the ignition or turning on the parking brake or pumping the brakes would release the interlock. 

 

Thought I was going to break the shifter.
 

Finally called OnStar (to see if they could offer a remedy or send a wrecker) while on hold with them, the damn thing released! After 3 traffic light cycles and several pi$$ed off people around me (rush hour). It was an awesome experience!


I had released the tilt/telescope lever and while moving the steering wheel violently around, the interlock released. 

 

Guess it’s going in for service next week. Not even 2k miles!

 

It’s a 2020, so much for waiting for them to work out the “first-year bugs” LOL. 

 

 

  • 2 months later...
Posted

I have a 2019 GMC Sierra slt happend to me and I used the push button start, phoned the dealership and they said that was a new one to them told me to come in if it happens again. my truck has 2800 kliks on it

  • 8 months later...
  • 2 weeks later...
Posted

Made an appointment to take the truck in, of course 2 days before the appointment the message disappeared on it’s own and hasn’t come back.  Hope this isn’t a reoccurring issue...

  • 5 months later...
Posted

bought me a 2021 rst silverado 1500 yeaterday, went out to start this morning and got a message to service steering column lock, and set key here and retry, with foot on break and holding in the start button it then reads no key found, i can start remotely twice, now not at all, when it did start i could not get out of gear, and yes i was pushing on break pedal, waiting on the dealer to show up now, what to do

  • 1 year later...
Posted

This just happens to me on my 2022.5 Silverado 

remote started with the app

screen went black and would not get out of park

message on dash now says service steering lock

i had to disconnect the battery and reconnect it to be able to drive

message is still there

truck is 2 months old

i have 900 miles. 

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I have a 2000 Silverado 1500 LS, whenever I put it into reverse and also in drive it clunks, the truck also feels sluggish when driving. Any advice/ideas ?
    • Looks like it's riveted to me. What is wrong with that 1? Welcome to the Forum!
    • Missing pieces of the Assembly   Detergency vs Solvency   Not the same thing. Detergency is the mechanism that surrounds solid particulates preventing amalgamation. Usually accompanied by a Dispersant whose job it is to keep those encapsulated particles in Suspension. Solvency keeps things that can be dissolved in solution.    Salt is a solid that can be dissolved. Pepper is a solid that cannot be dissolved. A detergent/dispersant is effective on pepper but a solvent is more effective on salt. As long as the solids remain in either state, dissolved or dispersed then they can be be removed with the oil upon change.    How many wranglers does it take to herd cats? Depends on how many cats your herding. How much sponge does it take to soak up water? How much water is there to soak up? Point is most oil blends start with some herding ability and next to zero sponge and recently even fewer wranglers are being sent to do the same job.    So you start with a dozen cowboys and zero cows but at the drive progresses you pick up cows along the way, but not cowboys. At some point you have more cows that the wranglers can handle and some leave the herd. Deposits. And the API has an acceptable number of cows they are willing to let loose. In the ideal world zero is the right number for he rancher but to the butcher....a few lost is fine. This cow is beat to death. Let's move on....   Solvency isn't something oils on the Walmart shelf care about AT ALL. Problem is, you motor does. Fuels driven varnish sticks rings and only a solvent can keep them in check. The bet is that the solids driven portion that plug the expander rings and the oil drain backs and VVT screens and AFM screens will be an issue long before varnish is. Not that it wont be but if they market well enough the consumer can be kept ignorant enough to either believe it is "normal" (A quart in 1 or 2K is normal) OR is kept at bay longer than the first owner is likely to hang on to the unit. Solvency cost money.    Now the OEM's have John Q. Public buffaloed into the belief that the number cows accumulated along the trail is a known and predictable CONSTANT. It isn't. Nor is the rate at which they crossed paths with them. Only the number of wrangles is constant. Or was. Each new generation of oil sees fewer and fewer of them.    So what happens when the number of cowboys is lower (lower TBN) with each seasons trail but the trial is longer (OCI) and the number of cows along that trail continues increase? (Conditions that promote deposits).    For awhile the blenders were on to something. Better bases are harder to degrade (fewer cows) but that was overtaken by a longer trail (OCI) and improved breeding (More cows) while continuing to reduce the cowboy staffing levels (TBN/Aniline #).    Marketing has been successful. We've fired most of the staff, cows breed line bunnies, the trail is ten times longer and we've convinced the boss his ranch is in better shape that it ever was.    That kids is just the cleaning side. The side few pay attention to.     
    • Mann+Hummel since 1941 per their web site 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...