Need a trim part

[NR1116]

I removed the splash guards on my 2019 1500, and found holes in the front fender.

The dealer can not seem to find the right part number for a gasket or something to fill the hole.

Any help?

[OnTheReel]

I don’t think there’s a factory part to fill that hole because all of the trucks get the mud flaps. 

 

https://www.truckhardware.ca/

 

^^^They make color matched plugs but don’t ship to the US apparently.

[Booger T]

Why'd  you remove the splash guards if I may ask?

[eppieguy]

1 hour ago, Booger T said:

Why'd  you remove the splash guards if I may ask?

Looks like they interfere with his step bars. 

[z1boss]

There is another post on here where someone filled them.  They removed them to stop their tires from rubbing I believe.  See below and scroll down about halfway

 

 

Edited February 20, 2019 by z1boss

[yankeedoodle86]

I removed the splash guards on my 2019 1500, and found holes in the front fender.
The dealer can not seem to find the right part number for a gasket or something to fill the hole.
Any help?

Did you ever find a way to cover that? I heard a rumor that rough country makes a delete for them but can’t find it. I’ll have to call them.


Sent from my iPhone using Tapatalk

[NR1116]

If you order the full size drill-less mud flaps from DuraFlap they send a plug for that spot.

[Sotally Tober]

7 hours ago, NR1116 said:

If you order the full size drill-less mud flaps from DuraFlap they send a plug for that spot.

Can you post some pics of what the plugs look like?

[Sotally Tober]

On 2/19/2019 at 5:13 PM, NR1116 said:

I removed the splash guards on my 2019 1500, and found holes in the front fender.

The dealer can not seem to find the right part number for a gasket or something to fill the hole.

Any help?

Here you go:  https://www.sharptruck.com/gatorback-color-match-summit-white-replacement-plugs-10-pack

 

[jon524]

Don't buy the plugs from Sharp Truck! Unless you only want them for the front they won't work. The rear fenders have two layers of steel and the plugs aren't long enough to secure them with a speed nut. 

[Silverado4x4]

Put a Chevrolet bow tie sticker over the hole. 

[EricTheRed]

I see there’s a finishing cap for the GMC... hopefully someone will make a cap for the Chevy.

[Tx_Bowtie]

I don't like the look of the caps, and definitely don't like the mud flaps/splash guards.  I found a wrap that is close to the color of my truck, also should protect against chips.  Whole thing took 30 mins, behind front tire and in front of rear tire.

[Tx_Bowtie]

Looks much cleaner and they are hard to see from 10' away

[TCS450]

On 6/1/2020 at 12:38 PM, Tx_Bowtie said:

Looks much cleaner and they are hard to see from 10' away

Do you remember what the color and brand of vinyl you ordered was?  I have tried several from 3M and Vivid without luck.

Edited July 9, 2021 by TCS450