Jump to content

Recommended Posts

Posted

I just put my summer rims and tires back on and now when driving on the highway the truck is jumping out to the side when hitting a bump.

I didn’t have this problem all winter.

Could the tires be causing this?

Nitro ridge grappler 295/55 20

 

 

 

Sent from my iPhone using Tapatalk

Posted
the warmer weather has made the oil in the shocks thinner, and is now telling you that one or both shocks are shot

Could shocks in 2017 z71 Silverado with 23000 miles be bad already?


Sent from my iPhone using Tapatalk
Posted

First thing I would check is tire pressure balanced on each side.? Second , yes shocks especially those cheap-ass pieces of junk Ranchos or Roncho's that GM puts on can and will fail even prior to 20,000 miles I am speaking from experience.

 

Tire pressure 

Shocks 

 

Update what u find....

 

Good luck 

Posted

47 psi
This is what nitto recommended
I had these rims and tires on for the last 2 summers with no problems with that tire pressure


Sent from my iPhone using Tapatalk

Posted

What’s the max psi on your tire?  If you’re running 47 on a tire with a max of 65 then I’d bring that down some. If the max is 80psi then 47 is probably alright. 

 

The ass end of trucks skipping around is pretty normal as there isn’t a lot of weight back there

  • Like 1
Posted

That's REALLY high. Is be shocked if the center of the tires aren't wearing out faster than the outer edges. I mean if you were hailing things then ok but empty they should probably be around 35. I had 285/45/22 Nitto's and I kept them as close to 35psi as I could and they wore flat all the way across.

Sent from my Pixel 2 XL using Tapatalk

Posted
2 hours ago, REDOO2000 said:

 

I just put my summer rims and tires back on and now when driving on the highway the truck is jumping out to the side when hitting a bump.

I didn’t have this problem all winter.

Could the tires be causing this?

Nitro ridge grappler 295/55 20

 

 

 

Sent from my iPhone using Tapatalk

 

 

 

Look into some traction bars for the rear, that would help

Posted
13 minutes ago, Jacoby said:

What’s the max psi on your tire?  If you’re running 47 on a tire with a max of 65 then I’d bring that down some. If the max is 80psi then 47 is probably alright. 

 

The ass end of trucks skipping around is pretty normal as there isn’t a lot of weight back there

this is correct. the max psi is what you would want for carrying the max allowable load.

An empty truck bed is less than half of your max load, so you should not be even close to what the tires say is the max tire pressure allowed.

 

If you are driving the same roads you did all winter and the only thing different is your tires.....

 

some say the ranchos are shot. But if you do the "jump on the bumper" test, does your rear end bounce more than 1 cycle when you jump off?

Posted

I have to check max psi. But I drove the last 2 summers with that psi and had no problems. Nitto also told me in a email to use that pressure
Truck bed is usually
always empty


Sent from my iPhone using Tapatalk

  • Like 1
Posted

How are the tires wearing? Same tread depth all the way across? That's really what will determine if you're using the right air pressure. If the center are wearing faster you have too much air pressure. If the outside edges are wearing faster than the center then you don't have enough air pressure...

Sent from my Pixel 2 XL using Tapatalk

Posted

There’s about 10k mikes on them and there wearing evenly all around
I’m going to try and lower air pressure before I drive home


Sent from my iPhone using Tapatalk

Posted

i know all tires (even within the same brand AND line) have their own sweet spot...I have KO2s and run then at 43-45 PSI...even wear all around, and over 50k miles on them...47 would be a little harsh for my set up, but when i see that number, it doesn't jump out at me like some sort of crazy high PSI.

 

but a different question that the rest of the folks have asked...you said even wear, that's great...do the tires still have really good tread life left?  if they are worn tires, that could also be a contributing factor...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...