Wheel Spacers, anybody got them, let's see them.

[Delta D]

Installed 1.75" Bora spacers on 2020 Custom Trail Boss. Fit was PERFECT! Had to slightly hit spacer on pilot hub with butt of my hand. Absolutely recommend this brand!

[Delta D]

No Trimming Required!  I went out and snapped a quick photo. 2" clearance on front edge , 1/2" clearance on rear edge. Factory 18" wheels and tires.

[OilfieldTrash78]

So, .375” spacers are ok you run on 20” AT4 OEM wheels without any stud grinding? Just looking to move the tire a bit away from the UCA when I step up to 275/65R20’s.


Sent from my iPhone using Tapatalk

[EricTheRed]

I’m running 295/70R18 tires on my stock Trail Boss... I like the look of the tires being slightly wider than the fenders... would spacers make my tires rub beyond what some minor trimming would fix?

[Joesharts]

On 3/19/2020 at 10:13 PM, fly53usmc said:

1.5" Coyote spacers.  No lug trimming due too grooves already machined into the 18" rims

Can you put a photo of front and back, stuck between 2” & 1.5”

[Thejet07]

Go with the 2”. I went with the 1 1/2”. I do like it but the 2” I think would look nicer. But it’s all objective. I think once I change my tires to something a bit beefier it will help and I may be completely happy with the 1 1/2”. I have the coyote as well with no issues


Sent from my iPhone using Tapatalk

[Joesharts]

16 minutes ago, Thejet07 said:

Go with the 2”. I went with the 1 1/2”. I do like it but the 2” I think would look nicer. But it’s all objective. I think once I change my tires to something a bit beefier it will help and I may be completely happy with the 1 1/2”. I have the coyote as well with no issues


Sent from my iPhone using Tapatalk

I’m not looking for as much of a beefier look. I have the same running boards as you and more so want my tires to be flush/stick out a tad further then them as for the fenders aswell. Just wanted to see what it looked like from the front/back with the running boards 

[EricTheRed]

Okay so hopefully this helps someone. I went ahead and installed BORA 1.5in spacers on my stock Trail Boss running 295/70/18 Falken Wildpeaks on factory wheels. Here’s how it looks. There’s no rubbing because I manscaped the wheel well (mud flap and bracket mod).

 

 

 

Edited December 9, 2020 by EricTheRed

[EricTheRed]

[tomthetrex]

2 hours ago, EricTheRed said:

Is that the putco rack?

[EricTheRed]

9 hours ago, tomthetrex said:

Is that the putco rack?

Yes sir it is. Putco Venture Tec.

[Joesharts]

I just received my 1.5” wheel spacers went to put them on with my stock 275/65R18 and the centre flange was a tight fit when I put them on my wheels, when I torque/tighter my lug nuts will it pull it through so it sits flush? Asking for a friend 

[pewterliftedz]

On 9/24/2019 at 6:04 AM, anthony2558 said:

1.50 wheel spacers, stock 20" wheels with 285/60R20 tires.

Sent from my SM-N970U1 using Tapatalk
 

This is the exact same tire size and wheel spacer size I was planning.  I’ve even got the same wheels, looks awesome.  I’ll probably do it this coming Fall

[Gregg Messenger VE6WGM]

On 9/24/2019 at 5:04 AM, anthony2558 said:

1.50 wheel spacers, stock 20" wheels with 285/60R20 tires.

Sent from my SM-N970U1 using Tapatalk
 

Is this just a level kit?  Or do you have a bit of a lift going on here?

 

It’s a nice stance.  Not too extreme, just enough

[Jaychevy81]

Is this just a level kit?  Or do you have a bit of a lift going on here?
 
It’s a nice stance.  Not too extreme, just enough [emoji846]

That looks nice I don't get the whole tires hanging 67 feet out of the wheel well look.

Sent from my SM-G986U using Tapatalk