Jump to content

Won't start ?

B.R.67

By B.R.67
in Troubleshooting, Warranty & Recalls

 Share

Recommended Posts

Rob Mugs Enthusiast

Rob Mugs

Posted
Posted
On 6/1/2021 at 2:55 PM, Dogdad said:

Any more issues since the floor mat correction? 

Ever since I noticed that, have had ZERO no-start issues

  • Replies 243
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

tystaples
tystaples

I have the same issue, started yesterday on my 2020 Denali 1500 with the 6.2. I purchased the truck new the end of April and it currently has 4900 miles on it. Crank and crank with no start. I did eve

tbarn
tbarn

A video of it not starting is of no use to the dealer or GM. It's not that they don't believe you but they cannot duplicate the concern. Watching it not start isn't any help diagnosing the issue.

econometrics
econometrics

True, but if you have a video with indisputable proof that the error is occurring, it will at least leverage them to take you more seriously and give more time to do tests needed to try and replicate

Posted Images

macodi Enthusiast

macodi

Posted
Posted

Brandon C any further issues since the bulletin fix reprogramming the ECM?

PandonSF Enthusiast

PandonSF

Posted
Posted (edited)

I’ve had my 2021 Sierra Denali for 3 weeks and have 900 miles so far. The non start issue has now happened to me twice so far. Have an appointment Wednesday at the dealer. Hoping it’s as easy as flashing the ecm. 
 

reading the other thread of the camshaft position sensor exciter wheel doesn’t sound like a fun fix having the truck taken apart. 

Edited by PandonSF
ABoothe New Member

ABoothe

Posted
Posted

My 2021 Silverado is having the same issue. This is the third spell. It will turn over and keep turning over. Won’t fire up. When parked for 20 mins or so it usually restarts fine. I have paid a ton of money for this truck and I expect it to start on time, every time. Can someone please post the solution so I can relay that information to my dealership, since they can’t seem to figure it out. Please and thanks. 

Dirk13 Enthusiast

Dirk13

Posted
Posted
1 hour ago, ABoothe said:

My 2021 Silverado is having the same issue. This is the third spell. It will turn over and keep turning over. Won’t fire up. When parked for 20 mins or so it usually restarts fine. I have paid a ton of money for this truck and I expect it to start on time, every time. Can someone please post the solution so I can relay that information to my dealership, since they can’t seem to figure it out. Please and thanks. 

If you read this thread you’ll see that No one can post the solution because it isn’t clear. Plenty of speculation and potential causes but no smoking gun at this time. 

Jct89 New Member

Jct89

Posted
Posted

Silverado’s for the last few years have left the factory with packing grease on the motor instead of shipping with oil due to epa regulations, the dealer is responsible for stripping excess grease upon receiving it at the lot. Sometimes the mechanics tasked with getting this grease off the motor are less than thorough. While the engine runs and heats up it makes the grease thin and runny causing it to basically get blown all over the place by the fans and belts and can get on electrical connections causing power to not get to where it needs to go, ie vehicle turning over but not starting right away. Sometimes the engine light will come on temporarily because the vehicle computer knows something wasn’t quite right but won’t give a code because it doesn’t know what’s going on and eventually goes back off after starting it up successfully a few times

davester Senior Enthusiast

davester

Posted
Posted
2 hours ago, Jct89 said:

Silverado’s for the last few years have left the factory with packing grease on the motor instead of shipping with oil due to epa regulations, the dealer is responsible for stripping excess grease upon receiving it at the lot. Sometimes the mechanics tasked with getting this grease off the motor are less than thorough. While the engine runs and heats up it makes the grease thin and runny causing it to basically get blown all over the place by the fans and belts and can get on electrical connections causing power to not get to where it needs to go, ie vehicle turning over but not starting right away. Sometimes the engine light will come on temporarily because the vehicle computer knows something wasn’t quite right but won’t give a code because it doesn’t know what’s going on and eventually goes back off after starting it up successfully a few times

This is just stupid.  Nobody packs grease on either the inside or the outside of the motor for shipping.

diyer2 Senior Enthusiast

diyer2

Posted
Posted

JCT89

What info made you believe this is true? 

Unbelievable.

The problem IMO.

 

Head up your ass jpeg.jpg

gemarsh Senior Enthusiast

gemarsh

Posted
Posted (edited)
6 hours ago, Jct89 said:

Silverado’s for the last few years have left the factory with packing grease on the motor instead of shipping with oil due to epa regulations, the dealer is responsible for stripping excess grease upon receiving it at the lot. Sometimes the mechanics tasked with getting this grease off the motor are less than thorough. While the engine runs and heats up it makes the grease thin and runny causing it to basically get blown all over the place by the fans and belts and can get on electrical connections causing power to not get to where it needs to go, ie vehicle turning over but not starting right away. Sometimes the engine light will come on temporarily because the vehicle computer knows something wasn’t quite right but won’t give a code because it doesn’t know what’s going on and eventually goes back off after starting it up successfully a few times

🤪🥴

 

How on earth would they be loaded onto and off of shipping trucks, boats or trains?

Edited by gemarsh
  • 3 weeks later...
MT3500 New Member

MT3500

Posted
Posted

This happened on my 2021 Silverado 3500 gas. It did it the first time at about 1500 miles and I torqued the fuse box pins at that time and thought it was fixed. Happened again a couple of weeks ago at 6500 miles. First time hot sunny day running errands around town. Second time towing a 10,000# trailer in the rain for 200 miles and stopped for fuel. Both times restarted after 15 or 20 minutes. The second time I kept cycling the retained power by opening and closing the door and then locking it. After the 4th or 5th attempt it started like normal with no codes. Took to the dealer today for a scan and found no codes. They installed the ECM software update in the previously listed service bulletin, and also a recall on the infotainment system. Hope this is the fix. I have looked at the gas pedal thing and that is not the issue here as I have the  Z71 mats that are installed correctly and always use my right foot on the brake pedal as everything I own has that requirement. I have had a couple of times when the dash indicated the remote was not found but it started anyways so that may be a sign of where the issue starts?

Dogdad Enthusiast

Dogdad

Posted
Posted
16 minutes ago, MT3500 said:

This happened on my 2021 Silverado 3500 gas. It did it the first time at about 1500 miles and I torqued the fuse box pins at that time and thought it was fixed. Happened again a couple of weeks ago at 6500 miles. First time hot sunny day running errands around town. Second time towing a 10,000# trailer in the rain for 200 miles and stopped for fuel. Both times restarted after 15 or 20 minutes. The second time I kept cycling the retained power by opening and closing the door and then locking it. After the 4th or 5th attempt it started like normal with no codes. Took to the dealer today for a scan and found no codes. They installed the ECM software update in the previously listed service bulletin, and also a recall on the infotainment system. Hope this is the fix. I have looked at the gas pedal thing and that is not the issue here as I have the  Z71 mats that are installed correctly and always use my right foot on the brake pedal as everything I own has that requirement. I have had a couple of times when the dash indicated the remote was not found but it started anyways so that may be a sign of where the issue starts?

Recall on infotainment system??

hesaw00 New Member

hesaw00

Posted
Posted
On 5/14/2021 at 9:06 AM, Jmartin2 said:

Anyone experience a permanent fix with this issue? My truck has the 3.0 duramax and I’m wondering if it’s potentially a different issue. Almost seems like the truck isn’t getting fuel while attempting to start. Always stars on the second attempt and never throws a code (which makes it real fun when dealing with technicians). 

I have the 3.0.  It has happened to me 7 times within the first 5k miles.  Been to the dealer 3x.  Last time they claimed to have re-torqued the fuse box bolts.  Other than that they say they can't replicate and usually mention that they "checked all the software".  First new truck i've bought in a long time so its very disappointing performance from a $60k truck.

To recap what my truck is doing
First two times, i was using key fob, and the start would spin but not fire.
3rd time - starter spun but would not fire, then it would not crank after at all for multiple attempts.  I had it towed to dealer but it actually did crank as he was putting it on the tow truck.
Times 4 - 7, push the crank button on dash, starter runs for ~10 seconds but no fire, and I can't get it to stop.  Then it has crunk on 2nd attempt every time.

ColoradoCub Enthusiast

ColoradoCub

Posted
Posted

This is being discussed in detail in the 2020 HD forum on this site. There is currently no fix for this problem, even after having the entire truck torn apart for the camshaft bulletin.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   4 Members, 0 Anonymous, 1,165 Guests (See full list)

  • Latest Articles

  • Posts

    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      You must have that upgraded gvw package which is only available or at least was in 2025 with the diesel engine for the 3/4 ton and that gave the truck physically the larger 12.0 ring gear rear diff and the 3500 rear spring pack. There is a difference in what the diff housing looks like externally as one tell tale and also your truck should have the upper overload spring pack and the frame pads that the pack goes up against.    The pressure the tpms system kicks the alarm in on a stock setting truck, that is a good question and was just from what I recall but I doubt I made any notes on it as I knew for the rear that it was not at all what I was after regardless either. Being that you have a diesel and if running on stock tires the minimum pressure on an empty truck seems to be around 50 psi from hearing of those that have weighted the front axle but the rear axle is very similar in weight to a gas truck and again a near empty truck on the rear could go down to 35 pounds at minimum. However the weigh scale is the proper way to know for sure as a guide.    As to changing the readings on the dash from metric to the US measuring system, oh yes that is done easily but what I was attempting to explain was that I can't pick and choose items I want to have in US and those I still want in the metric system at the same time as its either all or none. For example lets say you drove into Canada and switched your dash over to metric so your speedometer read in km an hour, well then your reading kilopascals on your tpms readout and your wife looks over and says what the hell is that saying in the tpms screen and you say "darned if I know, I think its Chinese" !
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      This is partly why I decided to have switched over to Amsoil SS as a way of hopefully preventing the buildup of the sludge/carbon on the pistons and clogging of the oil control rings and the carbon that would cause the compression rings to stick in their grooves as well as stay cleaner up top of the heads in the valve train in the first place, an oil that has tested better by third party testing over typical shelf oil and also doing my best to run relatively short OCI. However in saying that I don't think there is any way to easily prove the oil I was using prior allowed for a buildup at the OCI I was doing, nor in the other direction to make claims the Amsoil is keeping everything clean either. There really isn't a window into the engine is there to know anything for certain even if oil samples were taken for example that showed still healthy oil being dropped out of the oil pan other than engine tear downs that extensive and expensive testing of oils does to actually visually see what is really going on inside the engine. I wish there was some easy method of seeing what is going on but I don't happen to be aware of that if there is.  
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      My truck is a ¾ ton but my placard also says 80 for the rear tires, I think I might have the upgraded suspension to the 3500 series maybe.   I put my air down to 60 and the light was still on, and there was no way I was putting over 60 psi in the rear empty and not towing because I knew the actual number Toyo gave me and I didn't wanna ruin the center of my tires!   And you actually can change it in the settings from metric or is and it will show kph or mph then when you go into your tire settings it will be either psi or kpa, but it would be nice to just change it directly on the tire psi page 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...