Jump to content

Recommended Posts

Posted
1 hour ago, TXGREEK said:

 


That’s a great price, I’d avoid the mud as long as you can, it’s fun getting them dirty but horrible getting it out from every crack and crevice, especially with upgraded suspension. Mine was double that cost and ZERO interest getting into mud. I hog hunt often and though the previous Nitto Ridge Grapplers did ok in wet grass and shallow mud, after just one time cleaning my truck, it’s 4wheelers from there on out. Btw, you’ve got a good looking truck, congrats!


Sent from Above

 

Meh, I have a pressure washer for the ATV's so that's ok.  I know the mud gets everywhere, but that's just part of having a truck!

  • Like 1
Posted (edited)

had probably 5 or 6 stes of offroad tires and cant ever remember running any of em below 40 PSI.....my stock silverados are at 32 which seems too "squishy" to me but they are radials with nitrogen so just haven't got to a place to fill em up a bit....in colder climate you should be able to get away with lil higher PSI as heat isn't as much a factor..... summer is different story

 

my BFG's I ran about 45-50 psi normally, and I wasn't super anal about it so, just know I ran em at that and seemed fine....if I was serious at offroading I probably would have been and dialed em in dependent on terrain....just ran em on dirt roads, trails, and hwy...

Edited by Dunn
Posted

I’ve had Goodyear, BF Goodrich, Toyo, Cooper, Nitto, and Toyo. IMO the Toyo AT2s are the best all around AT hands down.


Sent from my iPhone using Tapatalk

  • Like 1
  • 3 weeks later...
Posted (edited)

Experiencing a bit of vancouver snow now and have to say my BFG KO2’s are performing extremely well!

A trip up the local ski hill yesterday went well too with plenty of snow on the roads.

I dare say they’re performing almost as good as the dedicated winters I had on my last truck!

They have about 14,000 km on them so I’m sure as they get some wear on them maybe the performance will deteriorate?

Edited by madconcept
  • Like 1
  • 1 month later...
Posted

Started a topic about P rated vs LT too.

Love the way the 275/65R20 fill the wheel well but the E rated BFG sure makes for a rough ride.

Probably consider going down to a 275/60R20 next time just to make the ride a bit more comfortable as you’re able to get a P rated tire at that size.

Who knows maybe there will be more options in a couple years in the 275/65 size?

  • Like 1
Posted

to think we used to do this just so we could hear the tires humm on the road and liked the tougher tire to guard against flats 75 miles from nowhere....we threw on BFG's, MT, or DC and ran them...

  • Like 1
Posted
On 12/28/2019 at 6:28 PM, jimmyboy8301 said:

I’ve had Goodyear, BF Goodrich, Toyo, Cooper, Nitto, and Toyo. IMO the Toyo AT2s are the best all around AT hands down.


Sent from my iPhone using Tapatalk

I would concur!

  • Like 1
Posted

I’ve also heard good and bad things about the Toyos AT2’s but I’ve had such bad luck with two Nittos that I’m prejudice towards Nitto and his stepsister Toyo. To this day I’ve never had one bad thing to say about BFG’s KO’s or KO2’s.
My main concern is “SIPING” and not the first 10K mile break in cause most tires are pretty much good inside that then cones the harder compound which is for longevity versus traction. I’ve run two separate sets of Ridge Grapplers and both

I jumped on the “Hype Wagon too” Both sets were slipping on wet paint like as if the wet paint was grease and both sets had their siping wear out inside 15k miles, scared the crap out of me one afternoon, drove up to Discount Tire and they were shocked too at how the siping was disappearing at just 15k miles. Deep siping is where it’s at for me and I’m a BFG guy for life. Btw, the KO2’s have literally NO slipping on the wet paint in the parking lot.

Nitto Ridge Grapplers new
c462a5303b8b9415c1055a8891605315.jpg

Nitto Ridge Grapplers at 15k miles “looks like siping was an afterthought with these tires”
2e21147be190cfce74ed12d6baff884d.jpg

But not with the KO2’s, their siping runs straight through the lugs [emoji1303]
0528b6c68d4367d5df3be5a533acc0a4.jpg

There’s just so much more that goes into making a Tire than looks, chemicals used is #1 in the KO2’s.


Sent from Above

  • Like 2
Posted

I had Toyo RT's on my F250 and loved them, but I will admit they they did spin a bit when the roads were wet after I got some miles on them.  

 

I always just assumed it was because the truck had nearly 1000ft/lb of torque. 

  • Like 1
Posted
I’ve also heard good and bad things about the Toyos AT2’s but I’ve had such bad luck with two Nittos that I’m prejudice towards Nitto and his stepsister Toyo. To this day I’ve never had one bad thing to say about BFG’s KO’s or KO2’s.
My main concern is “SIPING” and not the first 10K mile break in cause most tires are pretty much good inside that then cones the harder compound which is for longevity versus traction. I’ve run two separate sets of Ridge Grapplers and both

I jumped on the “Hype Wagon too” Both sets were slipping on wet paint like as if the wet paint was grease and both sets had their siping wear out inside 15k miles, scared the crap out of me one afternoon, drove up to Discount Tire and they were shocked too at how the siping was disappearing at just 15k miles. Deep siping is where it’s at for me and I’m a BFG guy for life. Btw, the KO2’s have literally NO slipping on the wet paint in the parking lot.

Nitto Ridge Grapplers new
c462a5303b8b9415c1055a8891605315.jpg

Nitto Ridge Grapplers at 15k miles “looks like siping was an afterthought with these tires”
2e21147be190cfce74ed12d6baff884d.jpg

But not with the KO2’s, their siping runs straight through the lugs [emoji1303]
0528b6c68d4367d5df3be5a533acc0a4.jpg

There’s just so much more that goes into making a Tire than looks, chemicals used is #1 in the KO2’s.


Sent from Above


Thanks for the demo. I appreciate your experiences.
  • Like 1
Posted

Don't really need tires yet, but I'm quickly diving into the rabbit hole. 

 

Current tires are Grabber ATP 275/55/20 XL. Good tire. Been happy with them. Previous truck I ran LT Cooper atw's, Grabber AT2s and KO's. That was before the newer KO2's and Grabber ATX. 

 

I do 90% of my driving on road. We get a decent amount of snow/ice/rain. So I like having a 3 peak rated tire. The other thing is I tow a large TT during the summer months. So I want a tire that tows well.

 

My Brother loves the Defender LTX on his F150. Says it works great in the ontario winters. I also really like the look of the Grabber atx though. Do I stick with a XL tire or go to a LT? My Grabber atp are 117T load range. Oddly the same size ATP LT tire is only 115T. I'd have to go up to a LT275/60/20 to get a 119T load. And the Defenders don't even come in a 275/55/20. it would have to be a LT265/60R20/E 121/118R or a LT275/65R20/E 126/123R which Im not sure would even fit. And those are both a much heavier tire. 

 

so many questions...so much to think about lol. sigh

Posted
Don't really need tires yet, but I'm quickly diving into the rabbit hole. 
 
Current tires are Grabber ATP 275/55/20 XL. Good tire. Been happy with them. Previous truck I ran LT Cooper atw's, Grabber AT2s and KO's. That was before the newer KO2's and Grabber ATX. 
 
I do 90% of my driving on road. We get a decent amount of snow/ice/rain. So I like having a 3 peak rated tire. The other thing is I tow a large TT during the summer months. So I want a tire that tows well.
 
My Brother loves the Defender LTX on his F150. Says it works great in the ontario winters. I also really like the look of the Grabber atx though. Do I stick with a XL tire or go to a LT? My Grabber atp are 117T load range. Oddly the same size ATP LT tire is only 115T. I'd have to go up to a LT275/60/20 to get a 119T load. And the Defenders don't even come in a 275/55/20. it would have to be a LT265/60R20/E 121/118R or a LT275/65R20/E 126/123R which Im not sure would even fit. And those are both a much heavier tire. 
 
so many questions...so much to think about lol. sigh


If you don’t need a real off road tire, the Defender LTX is unbeatable. But it’s a road tire.
  • Like 1
Posted
2 minutes ago, Robotaz said:

 


If you don’t need a real off road tire, the Defender LTX is unbeatable. But it’s a road tire.

 

exactly why Im leaning more that way. I like the looks of an AT tire more though, but function > fashion lol. Also the Agilis Cross Country may be an option. Slightly narrower LT 265/60/20 though. 

  • 10 months later...
Posted
On 12/24/2019 at 8:35 AM, SquireSCA said:

Yeah, I like them so far.  Not a lot of noise, they handle great in dry and in the wet so far... We rarely get snow in GA so not sure when I will get to try that out...  Hope to get onto some muddy trails soon.  The tread looks aggressive enough and is similar to a Duratrac in that department, so I would expect it to do pretty well off road.

The stockers were the Wranger TrailRunner AT which isn't a bad tire, except that the OEM version that GM uses is NOT the same tread depth as the off the shelf version...  Else, I would have kept those for awhile.

But the tread depth stock was like 10mm at best, and so I went to Discount Tire like 5 days after I got my new truck.  They gave me credit for those tires, so the new UltraTerrains installed and balanced came to just under $800 with taxes and fees...

Are you still liking the Ultraterrains a year later?  How have they worn?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I just can't think of the exact term GM uses for that higher gvw package without looking at the website but basically sort of a trailering package and I imagine it may also have been created to skirt around the licensing fee differences between a3/4 and 1 ton that apply in some states although ironically I believe in some states its the reverse that a 1 ton is the cheaper truck to license over a 3/4 ton. It makes no difference here in Alberta but oddly enough a 1 ton through my insurance company is a bit cheaper to insure over a 3/4 ton as its based on the insurance statistics they generate.    For sure when ever you do have the chance to weigh your truck and to be fair, try to have the fuel tank full or nearly so rather than give yourself a false sense of the truck being lighter by having an almost empty tank.    In my other comment I was mentioning stock sized tires and partly in case someone was reading this and thinking they could lower their pressure down to what your aftermarket tires are able to do with your empty truck as that is a vastly different picture in the leeway you have to play with for running minimum pressures while remaining safe. I will say also that its easy to see from reactions of truck owners that may have been more used to owning a half ton in the past or a car and be it on a forum like this or in person etc that they get so wrapped up in that placard pressure sticker that they can't get their head wrapped around the fact that an HD truck due to how much it can carry can also vary the tire pressures drastically lower than those pressures ( typically more so for the rear axle on stock sized tires ) when empty vs some car that isn't made to carry much so the tire pressures can't be lowered since it needs almost that much pressure just to carry the empty car.    If I ever do find myself in the states with this truck, I will only be too happy to switch it over to the US measuring system as then I will understand all the dash readings. The only thing that is off for me slightly with US measurements is US miles per gallon as I grew up with the Imperial gallon and to this day up here anyway speak in Imperial miles per gallon ( I don't do that on this forum though as that would confuse everyone for no good reason ). 
    • Yes that's right, it's the upgrade that includes the overload spring and all that stuff.   Someday when I'm empty and going by a scale I'm going to stop in and get some weight readings.   Exactly  you should have the ability to change individual settings, in in Canada so I'm driving with kph but then I'm stuck with kpa when I want psi lol    
    • You must have that upgraded gvw package which is only available or at least was in 2025 with the diesel engine for the 3/4 ton and that gave the truck physically the larger 12.0 ring gear rear diff and the 3500 rear spring pack. There is a difference in what the diff housing looks like externally as one tell tale and also your truck should have the upper overload spring pack and the frame pads that the pack goes up against.    The pressure the tpms system kicks the alarm in on a stock setting truck, that is a good question and was just from what I recall but I doubt I made any notes on it as I knew for the rear that it was not at all what I was after regardless either. Being that you have a diesel and if running on stock tires the minimum pressure on an empty truck seems to be around 50 psi from hearing of those that have weighted the front axle but the rear axle is very similar in weight to a gas truck and again a near empty truck on the rear could go down to 35 pounds at minimum. However the weigh scale is the proper way to know for sure as a guide.    As to changing the readings on the dash from metric to the US measuring system, oh yes that is done easily but what I was attempting to explain was that I can't pick and choose items I want to have in US and those I still want in the metric system at the same time as its either all or none. For example lets say you drove into Canada and switched your dash over to metric so your speedometer read in km an hour, well then your reading kilopascals on your tpms readout and your wife looks over and says what the hell is that saying in the tpms screen and you say "darned if I know, I think its Chinese" !
    • This is partly why I decided to have switched over to Amsoil SS as a way of hopefully preventing the buildup of the sludge/carbon on the pistons and clogging of the oil control rings and the carbon that would cause the compression rings to stick in their grooves as well as stay cleaner up top of the heads in the valve train in the first place, an oil that has tested better by third party testing over typical shelf oil and also doing my best to run relatively short OCI. However in saying that I don't think there is any way to easily prove the oil I was using prior allowed for a buildup at the OCI I was doing, nor in the other direction to make claims the Amsoil is keeping everything clean either. There really isn't a window into the engine is there to know anything for certain even if oil samples were taken for example that showed still healthy oil being dropped out of the oil pan other than engine tear downs that extensive and expensive testing of oils does to actually visually see what is really going on inside the engine. I wish there was some easy method of seeing what is going on but I don't happen to be aware of that if there is.  
    • My truck is a ¾ ton but my placard also says 80 for the rear tires, I think I might have the upgraded suspension to the 3500 series maybe.   I put my air down to 60 and the light was still on, and there was no way I was putting over 60 psi in the rear empty and not towing because I knew the actual number Toyo gave me and I didn't wanna ruin the center of my tires!   And you actually can change it in the settings from metric or is and it will show kph or mph then when you go into your tire settings it will be either psi or kpa, but it would be nice to just change it directly on the tire psi page 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...