Jump to content

Recommended Posts

Posted
My God guys!  There's a reason why I quoted@navaidone in my question.  I was interested in where HE ordered from because he did so very recently.  I said thanks to@Wakinvol for his answer but clarified I was asking someone else who had ordered more recently.  Give me ya'lls mailing addresses and I'll send some coloring books for your safe space.


Just as his reply wasn’t warranted neither was “sorry your feelings got hurt”. That saw cuts both ways. Don’t like it? Give me your address to send YOU some tissue to wipe your tears.


Sent from my iPhone using Tapatalk Pro
  • Like 1
  • Haha 1
Posted

Got mine here, I ordered Wednesday night and it came last evening from AZ, if it wasn't Easter I would be out messing with it right now😀

Install tomorrow and then red caliper covers and shiny 22" wheels already here and ready to go!

https://www.ebay.com/itm/DiabloSport-22451-Pulsar-LT-Control-Module/324417997332

 

Guy was a super fast shipper.

 

 

Posted

i ordered from mbenzgram.com on friday morning, it was showing back in stock, and later friday got an email for shipment confirmation, they have 10% promo going on so I paid $413 (no tax) lol

i bought few stuff in the past never had problems with them.


Sent from my iPhone using Tapatalk

I ordered from them 3/25. They told me when I ordered two weeks it will be shipped and when it goes out I’ll receive a shipping confirmation. So far no confirmation. Strange you ordered Friday and got confirmation already. Guess I will be contacting them. I hope it works out because I got it for 413 as well.


Sent from my iPhone using Tapatalk
Posted
1 minute ago, Jav_eee said:

 


Just as his reply wasn’t warranted neither was “sorry your feelings got hurt”. That saw cuts both ways. Don’t like it? Give me your address to send YOU some tissue to wipe your tears.


Sent from my iPhone using Tapatalk Pro

 

Uhhh yeah, ok.

Posted (edited)
7 hours ago, lapoolboy said:

Sorry your feelings got hurt.  

My feelings didn’t get hurt.  You were just a dick and I thought I’d point it out.  Enjoy your purchase.  If you didn’t intend to be that way then so be it. 

Edited by Wakinvol
  • Like 1
Posted
7 minutes ago, Wakinvol said:

My feelings didn’t get hurt.  You were just a dick and I thought I’d point it out.  Enjoy your purchase.  If you didn’t intend to be that way then so be it. 

Please tell me how thanking you for your response but clarifying that I was asking @navaidone as evidenced by my QUOTING HIS POST in my question is "being a dick"?

 

I then went on to apologize if your feelings got hurt.

 

Oh well, you need some Jesus on this Easter Sunday.  God bless you sir.

  • Like 1
Posted (edited)
On 4/4/2021 at 4:06 PM, Robby James said:

Got mine here, I ordered Wednesday night and it came last evening from AZ, if it wasn't Easter I would be out messing with it right now😀

Install tomorrow and then red caliper covers and shiny 22" wheels already here and ready to go!

https://www.ebay.com/itm/DiabloSport-22451-Pulsar-LT-Control-Module/324417997332

 

Guy was a super fast shipper.

 

 

Looking forward to your update on the Pulsar!  Keep us posted.

 

Note to others:  Holley has them in stock ... https://www.holley.com/products/tuners_and_programmers/pulsar/parts/22451

Edited by JasonHTX
Posted

Got mine in 2 days from Range. Installed in about 15 minutes and had some "learning curve" issues! Tech support had me up and running in about 15 minutes. Does everything they say and no issues after 2 days of use!

Posted

Those of you with the Pulsar, did you mount the device to the top of the airbox as instructions state or somewhere else?  It seems to me the better place would be on the vertical support in the cavity behind the headlight.  Also, does the OEM harness plug just kind of hang loosely under the Pulsar one once it replaces the OEM plug on the side of the airbox?

Posted

I see the pulsar is able to work with trouble codes, what exactly can it do? Can it both read and clear?

 

Personally I can’t see this as being earth shattering, as the simple programmers were in the same price range and offered same features but also tunes. Feel like I’m missing some to the features everyone is seeing here?

Posted

New model can’t be tuned so easily. And cost of tuning is currently at a higher cost then previous years. There’s really nothing out for the new model but the pulsar Lt


Sent from my iPhone using Tapatalk

Posted

I'm returning mine for a refund.  I messed around with the installation this weekend and I'm just too OCD to allow the big harness connector to just flop around under there.  Plus, it's really close to the hot radiator hose and rubs on the airbox inlet duct.  I just couldn't find a way to satisfactorily mount/route everything to make it look clean while being protected at the same time.  

  • Like 1
Posted (edited)
32 minutes ago, lapoolboy said:

I'm returning mine for a refund.  I messed around with the installation this weekend and I'm just too OCD to allow the big harness connector to just flop around under there.  Plus, it's really close to the hot radiator hose and rubs on the airbox inlet duct.  I just couldn't find a way to satisfactorily mount/route everything to make it look clean while being protected at the same time.  

Look into White Auto Media.  He's on back order right now but IMHO, it's a much better option since the BCM is programmed instead of a piggyback device.  @GTPprix is the owner.  Seems like a great guy

 

EDIT:

Seems like he has the programmer back in stock.  Now... to convince the wife this is something I NEED

 

Edited by Rob Mugs
Posted (edited)
1 hour ago, Rob Mugs said:

Look into White Auto Media.  He's on back order right now but IMHO, it's a much better option since the BCM is programmed instead of a piggyback device.  @GTPprix is the owner.  Seems like a great guy

 

EDIT:

Seems like he has the programmer back in stock.  Now... to convince the wife this is something I NEED

 

The AutoSync programmer does not work on T1 trucks and his programming is limited to BCM stuff.  So, he can't disable autostop or turn off AFM.

 

 

Edited by lapoolboy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • You must have that upgraded gvw package which is only available or at least was in 2025 with the diesel engine for the 3/4 ton and that gave the truck physically the larger 12.0 ring gear rear diff and the 3500 rear spring pack. There is a difference in what the diff housing looks like externally as one tell tale and also your truck should have the upper overload spring pack and the frame pads that the pack goes up against.    The pressure the tpms system kicks the alarm in on a stock setting truck, that is a good question and was just from what I recall but I doubt I made any notes on it as I knew for the rear that it was not at all what I was after regardless either. Being that you have a diesel and if running on stock tires the minimum pressure on an empty truck seems to be around 50 psi from hearing of those that have weighted the front axle but the rear axle is very similar in weight to a gas truck and again a near empty truck on the rear could go down to 35 pounds at minimum. However the weigh scale is the proper way to know for sure as a guide.    As to changing the readings on the dash from metric to the US measuring system, oh yes that is done easily but what I was attempting to explain was that I can't pick and choose items I want to have in US and those I still want in the metric system at the same time as its either all or none. For example lets say you drove into Canada and switched your dash over to metric so your speedometer read in km an hour, well then your reading kilopascals on your tpms readout and your wife looks over and says what the hell is that saying in the tpms screen and you say "darned if I know, I think its Chinese" !
    • This is partly why I decided to have switched over to Amsoil SS as a way of hopefully preventing the buildup of the sludge/carbon on the pistons and clogging of the oil control rings and the carbon that would cause the compression rings to stick in their grooves as well as stay cleaner up top of the heads in the valve train in the first place, an oil that has tested better by third party testing over typical shelf oil and also doing my best to run relatively short OCI. However in saying that I don't think there is any way to easily prove the oil I was using prior allowed for a buildup at the OCI I was doing, nor in the other direction to make claims the Amsoil is keeping everything clean either. There really isn't a window into the engine is there to know anything for certain even if oil samples were taken for example that showed still healthy oil being dropped out of the oil pan other than engine tear downs that extensive and expensive testing of oils does to actually visually see what is really going on inside the engine. I wish there was some easy method of seeing what is going on but I don't happen to be aware of that if there is.  
    • My truck is a ¾ ton but my placard also says 80 for the rear tires, I think I might have the upgraded suspension to the 3500 series maybe.   I put my air down to 60 and the light was still on, and there was no way I was putting over 60 psi in the rear empty and not towing because I knew the actual number Toyo gave me and I didn't wanna ruin the center of my tires!   And you actually can change it in the settings from metric or is and it will show kph or mph then when you go into your tire settings it will be either psi or kpa, but it would be nice to just change it directly on the tire psi page 
    • Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...