Jump to content

Upgrade UCAs on AT4

PGriss83
 Share

Recommended Posts

TheTicketTX Enthusiast

TheTicketTX

Posted
Posted
10 minutes ago, JoeyBones88 said:


Nice! No plan for long travel here, reading about not lifting more than 2.5” concerns me because my truck is an AT4 and came with rough country 2” level kit. So 4” over normal... I’d want the same height


Sent from my iPhone using Tapatalk

That level kit would come out, and the Kings would give you the same 2.5" lift (same as factory pretty much)

JoeyBones88 Enthusiast

JoeyBones88

Posted
Posted
That level kit would come out, and the Kings would give you the same 2.5" lift (same as factory pretty much)

Right, but I want to keep it around 3.5-4”


Sent from my iPhone using Tapatalk
TheTicketTX Enthusiast

TheTicketTX

Posted
Posted
1 minute ago, JoeyBones88 said:


Right, but I want to keep it around 3.5-4”


Sent from my iPhone using Tapatalk

BDS makes a great 4" kit with their FOX 2.5s. Id check them out. You keep the factory warranty as well

JoeyBones88 Enthusiast

JoeyBones88

Posted
Posted

Yea I’ve checked their kit out. Wish they’d let me save some money by not having adjustable shocks.


Sent from my iPhone using Tapatalk

TheTicketTX Enthusiast

TheTicketTX

Posted
Posted
2 hours ago, JoeyBones88 said:

Yea I’ve checked their kit out. Wish they’d let me save some money by not having adjustable shocks.


Sent from my iPhone using Tapatalk

I think the Comp Adj. is an option for the 2.5's, otherwise they are just resi's

Dunn Senior Enthusiast

Dunn

Posted
Posted

KINGS are money.....well worth it considering trucks cost 50-70k 

 

 

PGriss83 Enthusiast

PGriss83

Posted
  • Author
Posted

I talked to the guys at Accutune.  They recommended Fox over Kings saying the bushings and joints were a little better.  I’m personally going to ride with the Bilstein 5100 setup.  I may swap out the coils later.
I think I’m sold on the Icon Delta Joints too.  They look solid and I think they will hold up well.  Plus they are fully serviceable.  If I went anymore than what I’m doing I’d probably go with the BDS 4” kit.  I’ll put some pics up when I get everything installed.  

TheTicketTX Enthusiast

TheTicketTX

Posted
Posted
1 hour ago, PGriss83 said:

I talked to the guys at Accutune.  They recommended Fox over Kings saying the bushings and joints were a little better.  I’m personally going to ride with the Bilstein 5100 setup.  I may swap out the coils later.
I think I’m sold on the Icon Delta Joints too.  They look solid and I think they will hold up well.  Plus they are fully serviceable.  If I went anymore than what I’m doing I’d probably go with the BDS 4” kit.  I’ll put some pics up when I get everything installed.  

Good luck dealing with Fox customer service. IMO both are great, but Kings are US made and have phenomenal customer service. Really no noticeable performance difference

PGriss83 Enthusiast

PGriss83

Posted
  • Author
Posted
1 hour ago, TheTicketTX said:

Good luck dealing with Fox customer service. IMO both are great, but Kings are US made and have phenomenal customer service. Really no noticeable performance difference

That makes a difference IMO.  I’ll keep that in mind if I go away from Bilsteins. 

Taco_Ninja Enthusiast

Taco_Ninja

Posted
Posted (edited)

I had Kings on my previous vehicle, a 4runner 5th gen. Loved them, worth every penny. Ran them with Icon delta joint UCAs, eventually replaced them with JBA UCAs (similar to Cognito's design). Didn't have the tools to replace the pressed in joints and would cost a couple hours of labor to get them rebuilt on top of the parts that needed replacing, about $400-500 total to rebuild. I rebuilt them once and sold them as a carcass when they needed a second. Sucked because I take pride in doing most of my mods myself but didn't make sense for me at the time.

 

Older (and wiser?) me likes the Cognito UCAs with bolt-on ball joints for easy replacement. Quieter than uniballs and easier to replace. The deltas were quiet but rebuilds were costly. Also doesn't hurt that every part on the UCA is greasible and rebuildable.

 

Fwiw, I'm hearing from my peeps that Kings are pushing a 40 week lead time. Not confirmed or validated in any way, this is from friends who have tried to order recently (I hear it's a supply chain issue.) 🤷‍♂️

Edited by Taco_Ninja
Photo
TheTicketTX Enthusiast

TheTicketTX

Posted
Posted
9 hours ago, PGriss83 said:

That makes a difference IMO.  I’ll keep that in mind if I go away from Bilsteins. 

If you're not ordering from a reputable tuning distributer (Accutune.. etc), you're up ****** creek w/ FOX if you have any issues, and prob looking at longer than the 40 week wait times Kings is currently having. FOX suspension is all manufactured in China.

 

9 hours ago, Taco_Ninja said:

I had Kings on my previous vehicle, a 4runner 5th gen. Loved them, worth every penny. Ran them with Icon delta joint UCAs, eventually replaced them with JBA UCAs (similar to Cognito's design). Didn't have the tools to replace the pressed in joints and would cost a couple hours of labor to get them rebuilt on top of the parts that needed replacing, about $400-500 total to rebuild. I rebuilt them once and sold them as a carcass when they needed a second. Sucked because I take pride in doing most of my mods myself but didn't make sense for me at the time.

 

Older (and wiser?) me likes the Cognito UCAs with bolt-on ball joints for easy replacement. Quieter than uniballs and easier to replace. The deltas were quiet but rebuilds were costly. Also doesn't hurt that every part on the UCA is greasible and rebuildable.

 

Fwiw, I'm hearing from my peeps that Kings are pushing a 40 week lead time. Not confirmed or validated in any way, this is from friends who have tried to order recently (I hear it's a supply chain issue.) 🤷‍♂️

I heard the same from a buddy of mine. How many miles you get out of the Delta Joints before you needed a replacement kit/joint?

  • 4 weeks later...
doggfatherone Enthusiast

doggfatherone

Posted
Posted
On 4/19/2021 at 12:55 PM, Leevon said:

I have the Rough Country upper control arms with Fox 2.0 coilvers (1" over stock) on my Trail Boss.  They're OE type design, affordable, high quality and correct the ball joint angle.  For no more lift than you're doing I think they fit the bill.  

thumbnail_IMG_4352.jpg

Thanks for the info!

Kdembo03 Enthusiast

Kdembo03

Posted
Posted
On 4/19/2021 at 1:55 PM, Leevon said:

I have the Rough Country upper control arms with Fox 2.0 coilvers (1" over stock) on my Trail Boss.  They're OE type design, affordable, high quality and correct the ball joint angle.  For no more lift than you're doing I think they fit the bill.  

thumbnail_IMG_4352.jpg

 

I see you wrote they are OEM type designed which is great. Are you currently running OEM wheels, and if so would 285/60/20 fit? More so just wondering about the width. I know AT4s and TB come with 275 wide but would 285 rub on the UCAs?

 

Thanks

Dunn Senior Enthusiast

Dunn

Posted
Posted

i basically have bilstein 5100 AT4  suspension and picked up Cognito UCA......reason is replaceable joint and they fit with stock wheels.........they were $399 pair......my tires are 275/60 or 65/R20....whatever the elevation wheel is

 

any UCA is better than stock......they really are cheap once you see them off the truck, i was actually kinda shocked.....a soda pop can is first thing i thought of when i got my stock UCAs back.....

  • Thanks 1
  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • whenindoubtuseahammer
      My First Project and GMC has me stumped

      By whenindoubtuseahammer · Posted

      Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...