Jump to content

Recommended Posts

Posted

 

No rubbing at all. Half inch clearance at the tightest point in the front.

 

The rear tucks up nicely before hitting the bump stops:

 

 

And a surprising amount of droop on the opposite side:

2015-09-26%2015.04.12_zpsnadxyces.jpg

 

Awesome! No frame twist. :thumbs:

 

Don't try this with a FORD! :nonod:

Posted

Main thing I don't like about GM tonneau is that it goes right to edge of box covering stake holes! As you can see on my truck I need them for rails!

Posted

How is this color to keep clean? Notice a lot of scratches/swirls?

 

 

Ryan

Posted (edited)

20151108_092652_zpsswbinywv.jpg

 

It scratches and swirls like any other dark color.... and in my case chips like crazy! I do like the color though and it looks alright even with the chrome. I might peel the lettering off but i think I will leave the strips on the doors. My 3m goes up to the bottom of that chrome strip anyway.

 

Sent from a potato

Edited by 1994Vmax
  • 1 month later...
Posted

New to the site but here is my 2015 Silverado.

 

post-152230-0-81164700-1451430421_thumb.jpg

 

Recently put black bowties on her and just got the RC 2" leveling kit in the mail today and its going on next week.

 

In the process of trying to decide on what wheel/tire combo I want to go with.

 

I am thinking about the ProComp 32 series 17x9 with 285/75/17 Nitto Terra Grappler G2s.

 

But if anyone has any suggestions that would be great too :D

post-152230-0-81164700-1451430421_thumb.jpg

post-152230-0-81164700-1451430421_thumb.jpg

post-152230-0-81164700-1451430421_thumb.jpg

  • Like 1
Posted

Swapped my 2014 Fire Red Sierra for this 2016 Silverado in Tungsten!

 

post-125775-0-69350000-1451615083_thumb.jpg

post-125775-0-69350000-1451615083_thumb.jpg

post-125775-0-69350000-1451615083_thumb.jpg

post-125775-0-69350000-1451615083_thumb.jpg

  • Like 1
  • 4 weeks later...
Posted

Hey guys Its been awhile since this threads had some love so I figured Id throw mine into the ring!

2015 Chevy Silverado Tungsten LTZ 4x4 with Max Tow package

Additions:

1) RetraxOne Tonneau Cover

2) DeeZee step bars

3) 3" Maxtrac leveling lift

 

post-149253-0-80348100-1451932388_thumb.png

Photo Oct 13, 12 20 52 PM

post-149253-0-80348100-1451932388_thumb.png

Posted

Just picked up a 2016 Tungsten double cab and Im in love!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • 4 weeks later...
Posted

Here is mine 2015 got right after Christmas so far tinted the front windows and top and wind shield, added a roll up bed cover (roll back by back flip) have the RC 2" level in hand but no time to install it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Google converting 98 4.3 spider injection to carburetor if all else fails. 
    • That computer lies!
    • My centre console USB ports haven’t been working and the one in the glovebox is starting to act up. When I plug my phone into the cord the radio will go black and stop playing, and the CarPlay is inconsistent.   I checked the fuses and they were fine. I changed the USB port out and still nothing. Hoping for some advice on what I should be looking at.  
    • The truck is a 1995 Chevrolet S10 Blazer, 4.3 VIN "W" engine. :cracks knuckles:   On a whim - because I needed a headache - this truck was for sale so I stopped to take a look. Doesn't run. Well, it does, but barely. Long crank, choppy idle, bad misfire(s), it REEKS of fuel. I can DO this..I'm thinking. Diamond in the rough. One owner until last year. A young guy is selling it, he bought it 6 months ago. It stranded him more than once, he's got a newborn. It was in the shop 10 days ago and he "thinks" they said it needs a new fuel injection system. He can't put any more money into it, needs it gone. I was thinking of upgrading my Macbook, which is a total want, not a need. For less than the price of a new laptop I can have fun for months tinkering on this truck and enjoying it. I'm taking this truck home. The guy was beyond thrilled, his wife was there, she thanked me profusely, I could tell they were hurting. They seemed like good people in a bind.   Some parts, a wash, maybe a set of tires, and I can have a few months of fun and then turn it for beer money (or the next project).   Sure enough, there's a work order from a shop last week in the INCHES of paperwork on this truck dating back to when the first owner bought it. They put a new distributor in it, fuel injection work describes basically opening the plenum and putting it back together. He said he couldn't afford any more work so he had them button it up and that's when he put it up for sale.   I'm not well versed in 4.3. I did discover 1995 uses the 1992-1995 SCPI "Spider" injector which is riddled with issues from splitting lines, clogged or cracked poppet valves and plastic spider legs that crumble over time. Cool. I'll just order me a ne---. Oh, the auto parts store doesn't have it? Rock Auto doesn't have it. eBay? $$$$$$ for used. These are UNAVAILABLE period end of story unless you know "a guy" who's still got one in a box somewhere.   Can't upgrade to the '96-'04 injector, it's a different plenum, wiring/pinout and sensor config.   There are a few kinda "know a guy" -guy rebuild services for these injectors out there for about $350. Okay, Okay... I'd like to know if anyone has used them? Anyone got a lead on these crappy 92-95 spiders?   I also don't want to send MY spider to Narnia and back without knowing if that's truly the problem. I guess I'll need to pull apart the plenum and do some digging.   I was also thrown for a loop. This 1995 model year truck has an OBD-II connector. The interface is decidedly not OBD-II. I can read and reset trouble codes and view live data, but there's not a lot of data. Like misfire count and on what cylinder, that's not there. It's OBD-1.5.   Nothing is ever easy. Now it makes sense why this guy wanted to disappear this thing for cheap. I'm guessing the shop told him the injector is toast, the part is unobtainable and they're not going to sort sending the thing to a rando offering rebuild service on craigslist, and the kid likely can't be without a working car for 3 weeks even if they'd facilitate that.   Experience with these early SCPI's? Stories? Things to check? Sympathy? (..Nah...)   This can sit until I sort it. But I haven't had a problem with a vehicle I couldn't easily solve in a long time.    
    • I have four that read by the dash 8 to 10% better than miles/pump calculations and I have one that is spot on. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...