Two LED cubes in the fog lights

[zmnypit]

You're not going to be able to get 2 in the sierras. I built my own brackets for and there's just not enough room for two without cutting the bumper.

 

 

[Highcountry1]

You're not going to be able to get 2 in the sierras. I built my own brackets for and there's just not enough room for two without cutting the bumper.

 

 

Those look good! Mine isn't a Sierra tho, it's a 15 high country Silverado, like dylbeau1500's

[dylbeau1500]

Those look good! Mine isn't a Sierra tho, it's a 15 high country Silverado, like dylbeau1500's

So before i get to installation I have to tell you that I only tried it with the 2x2's not the 3x3's and I'm not sure if they are going to fit. So what I did to install my 2x2's was first take off the grille then bumper and unplug all wiring and remove the fog light cups and bezels. Once I did that I removed the plastic lens/where the bulb goes and was left just with the cup. I then mounted the lights by using the included hardware and drilled 2 holes into the fog light cup. The only odd part was that I had to drill the top and mount the lights upside down because if they were right side up they would be stuck pointing to high up. So once they are mounted upside down you can take off the face plate and reverse it if it bugs you. One can only tell if you are looking directly at it from a very close angle. If you have any questions about wiring or mounting/pictures please let me know.

 

Sent from my SM-G925V using Tapatalk

[zmnypit]

Those look good! Mine isn't a Sierra tho, it's a 15 high country Silverado, like dylbeau1500's

I was replying to OP

[AZBlackChevy]

How is the output on those cubes? Better than stock fogs with an HID kit?