Jump to content

Recommended Posts

Posted

Mexican made trucks assembled by workers being paid peanuts in comparison  having quality control issues, no way.....

 

I'm not surprised that my double cab made in america has seen a fraction of the issues that club cab mexican made gm trucks have seen. Been to the dealer maybe 3 times total in 4 years now for broken or defective parts. Other then that regular maintenance only.

Posted

I think it goes more toward "lab" or simulated testing vs real world testing ....

 

As these companies try to develop and put new products out cheaper by avoiding real world testing, they are going to pay a price.

 

Im sure someone at GM will look back  and see what was paid out in warranty repairs and crap themselves.

Posted
1 hour ago, UGADawgs said:

I thought GM stated they had 7million miles of testing on the T1s. 

 

Im certain that's mostly in a controlled (lab) type setting ....  You'd need a fleet of trucks and people to accomplish that in the course of final build beta testing

Posted
10 hours ago, Demon said:

I don't have parking sensors. 

Demon, that’s one badass looking truck!

Posted (edited)
On 1/27/2019 at 5:56 PM, fish_guru said:

As indicated in my previous posts I had a leak as well.

 

I took my truck to the dealer on 1/5/19 and got it back on 1/15/19.

 

My dealer did not replace the window. They re-set my current one. Didn't really care as long as it doesn't leak.

 

While detailing the interior of my truck after getting it back I discovered a large gouge in the plastic kick panel on the drivers side back seat area that they damaged while removing and re-installing the back seats. I also found some minor paint chips under the back glass.

 

In addition, after I picked it up, I kept hearing something roll around the dash area every time I turned. Thought it was the key FOB but after eliminating that possibility I found a loose interior screw rolling around the dash board storage area. Then I found another one in the center console rear cup holder. Then, predictably, I started hearing a squeak from the rear seat area after hitting any bumps...assuming it's the two missing interior screws I found. I expected that stuff when I was 16 and my friend and I took apart my dash to install a radio and had left-over screws when we finished but not when I take my truck to a dealer. These are supposed to be professionals.

 

To make matters worse, after the first rain storm, my truck leaked again!

 

Took it back to the dealer and told my service adviser that everyone I know who has had this problem had their windows replaced, not re-sealed.

 

He called a few days ago and claims GM will not sign off on a window replacement. He claims they found the leak and sealed it. Sure...like they did the first time. Now they are waiting on the kick panel to come in that they damaged.

 

On a side note, prior to taking my truck in the first time, I messaged the GMCustomerService guy who sometimes responds to posts offering to work in conjunction with the dealer as an additional layer of support. No offense, seems like a nice guy, but other than e-mailing the dealership's 'customer experience manager' I don't really know what else they do. It doesn't seem to have helped my situation at all. 

 

I really do love the truck but this ordeal is sucking the joy out of the ownership experience.

Have you considered going to a different dealer? I had a Honda that had an airbag sensor that kept having issues. I went to the same dealership four times and they couldnt repair it and didnt want to cover it under warranty. I went to a different dealership and it was fixed in a few hours and under warranty. If I have issues at a dealership or service manager, I just leave ...I realize that might not be possible in your circumstances, however. 

Edited by Chris walker
  • Like 1
Posted

I have considered it.  

 

Unfortunately I had a bad experience with my 07 Silverado at the closest dealership to my house. Long story short...check engine light,  fuel evap system, 5 service visits and over $1000 later and the light continues to come back on.

 

My truck is at the second closest dealer to my home.  The next one after that is do-able but a much bigger inconvenience. However it may come down to that. 

 

Posted
3 hours ago, Chris walker said:

Have you considered going to a different dealer? I had a Honda that had an airbag sensor that kept having issues. I went to the same dealership four times and they couldnt repair it and didnt want to cover it under warranty. I went to a different dealership and it was fixed in a few hours and under warranty. If I have issues at a dealership or service manager, I just leave ...I realize that might not be possible in your circumstances, however. 

I have a Honda dealer 5miles from my house and have had too many bad experiences. I have to go 20miles to another and it's worth it.

  • Like 1
Posted
59 minutes ago, UGADawgs said:

I have a Honda dealer 5miles from my house and have had too many bad experiences. I have to go 20miles to another and it's worth it.

Same for me. The dealer closest to me has a bad reputation. I go 30 miles out of my way in horrible traffic for the better service. Just can’t take any chances. Oddly enough, that’s how these dealers make money; service. They do well on warranty service as well so it baffles the imagination why in the world they wouldn’t want to keep a customer happy. Laziness???

Posted

Add my 2 month old Sierra AT4 to the list. Not even 2k miles yet and it leaks from the rear driver side window. Live in Cali so we don’t get much rain but we are getting some this week and it showed Two nights ago. I wiped it down thinking maybe it was me putting my backpack in the back seat, but this morning I woke up to rain so I checked and water had leaked in and ran down the window on the seat and into the little storage area in the rear seat. Left it at the dealer this morning and will wait a couple hours to see what they say. I’ve owned 2 s10 blazers, 1 Tahoe and 1 Silverado before this and never had any leak issues. Not happy at all, but willing to see how dealer/GM will fix this.

  • 3 weeks later...
Posted (edited)
On 1/28/2019 at 7:43 AM, Sierra Dan said:

Automotive prices continue to Rise, while Quality Declines.

The simple fact of the matter is that vehicles are not truly tested enough before being released into production.

Or, assembly lines are relying more on robots to perform repetitive tasks. Robots are not good at quality control however.

And they want to give robots the task of driving us around. YIKES!!

 

Sorry to hear of the issues with the windows guys. I can't imagine the frustration and disappointment of having your new and expensive truck have an issue that should have been taken care of in the first month of design. Here's to a speedy and free repair for everybody affected. 

Edited by CadillacLuke24
Posted

If you have a leak can you mention if your truck is assembled in the US or Mexico please?   I'm curious if there is a pattern there.   

 

Thanks, 

Smitty

Posted

Mine was built in the US.  I don't think the build location matters, I believe the windows themselves were bad.  From what I've heard GM has changed the supplier.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...