Jump to content

Recommended Posts

Posted
11 hours ago, warhawk89 said:

For record keeping, the body shop says the issues they found were the cracks in the upper rear pillars and cracks within the plastic assembly.

Here's photos of the repair process.

IMG_1131.jpg

IMG_1134.jpg

IMG_1133.jpg

IMG_0948.jpg

IMG_0947.jpg

IMG_0946.jpg

IMG_0945.jpg

IMG_0944.jpg

Did they take your window out without removing the spoiler?

and that caked on yellow stuff looks like the original repair wasn’t done like the TSB requires....

doesnt look anything like other repairs on here

Posted
9 hours ago, Centrebaseball said:

Did they take your window out without removing the spoiler?

and that caked on yellow stuff looks like the original repair wasn’t done like the TSB requires....

doesnt look anything like other repairs on here

Yeah the rear window assembly is removed by removing the back seats to disconnect the electronics and then they can cut your window out with basically string. The glass guys will clean up the old caulk etc and just install it. It turned out better than factory. The spoiler doesn't need to come off for that purpose but they will remove the spoiler during the initial TSB caulk job.

 

As for the yellow stuff aka the caulk, it was applied as the TSB says to do so just in a crappy fashion. You have to remember dealer's and service techs don't really care about warranty stuff like this and are gonna half ass things.

I had GM forward the window and the bill to a third-party collision body shop for all my repairs moving forward. So, they did a bang up job on the window swap.

Posted
On 1/30/2020 at 5:53 AM, UGADawgs said:

Picked up the truck last night after the window swap. They assured me everything was QA'd. It was dark and raining, so really only got to review the inside. They scratched the nuts out of both pillars. I told the advisor to order new plastic for each side and I'd come back for them to replace. He said he'd have to review with his manager in the morning and took pics. I don't understand how technicians have a complete lack of effort, nor attention to detail, and no cares about other people's property.

 

 

IMG_20200129_181120.jpg

So service guy yesterday told me yesterday that one side's replacement panel was in Michigan but the side is on backorder. yay! :(

Posted
On 12/29/2019 at 1:45 PM, hiranger said:

I had purchased mine in March and only been driving to work (4.5 miles each way) so I didn't ever see, November 11th we went to the In-laws and it was raining, My 10 year old says I'm getting wet, It was scheduled for its first oil change on the 26th, said they would need to keep it for about a week, I told them I would need a loaner can't be without wheels for a week, so I had to wait almost 1 month, they called, I dropped mine off and pick up a 2019 Z71, last night we are coming back again from my in-laws, we stop to get gas and my 4 year old daughter Mom! this truck leaks in the same place as daddy's truck!

mine.jpg

My Silverado

loaner.jpg

Their Loaner Z71

Well took them 21 days working on my, Thinking I've had it back for 2 weeks now, Initially I got it on a Thursday had to take it back on Monday seems they did the brake recall and broke it, they only kept it a day on that. So far no leaking.

Posted

I had brought my 2019 silverado in for the rear window leak and they repaired it using the service bulletin. I went in to go pick it up after the repair and told them i wasnt accepting it because their worksmanship for the repair, and also they did not clean up the rust that had built up on the bottom seat bracket. They called me back after the weekend and said it was g2g so i went to pick it up. There was still seam sealer left on the window and its visible between the glass and body. Minor issue because you wouldnt notice it if you werent looking. It looks like they tried to remove the rust with a wire brush and sand paper. They actually took off the paint in some spots down to bare medal. And i also noticed a white mark on the plastic trim on top of the sliding glass. Looks like some seam sealer made it onto the plastic and they used a harsh chemical to try and remove it. So after fighting with the dealership and GM i am scheduled to return the truck Monday to have a GM representative to take a look at it. Why does this process have to be such a PAIN. The dealership said i have to get with GM to figure out the next steps, and GM said that the dealership should be handling. No one knows their asses from a hat and as soon as they have your money it seems like they do not care whatsoever. What exactly is the GM rep going to do? Why does a gm rep have to look at it after it was the dealers fault their technicians are incompetent? I have had less problems with my 90s japanese shitbox. Very frustrating experience. Especially this being my very first new vehicle purchase.

Posted

Well.. guess you can add me to the list of leaky rear windows. 19 Sierra with a build date of 07/2019. Calling my dealer today to schedule an appointment to get this fixed.

 

I know this thread is lengthy, but any advice anyone can give thats dealing with this? Do i push for a full window replacement? 

 

C675C437-8097-44A0-B724-8A0CAF7E06F4.jpeg

Posted
1 hour ago, Tomtom87 said:

Well.. guess you can add me to the list of leaky rear windows. 19 Sierra with a build date of 07/2019. Calling my dealer today to schedule an appointment to get this fixed.

 

I know this thread is lengthy, but any advice anyone can give thats dealing with this? Do i push for a full window replacement? 

 

C675C437-8097-44A0-B724-8A0CAF7E06F4.jpeg

Best bet is to try and find a crack on that plastic piece up there and point it out because the TSB is to replace a window if a crack is there.  Absent a crack, they are supposed to do the caulk job and at that point you are at the mercy of whatever GM and the dealer decide to do. Good luck.  Keep checking in here.  

Posted

Yeah tbh, just crack it if it's not visible. Save yourself the time and bypass the entire nonsense of the TSB.

Go ahead and call GM and escalate it to a supervisor so you can have a case # for record keeping purposes.

Other than that, it's just a time process of going and coming back and forth until it's done right. Stick in there everyone!

UPDATE: Took the trail boss down through the sticks and some mud in the pouring rain this weekend and the new window hasn't leaked yet. Still have that sense of paranoia though. Stellar.

Posted

Dropped mine at the dealer today for a new window, recalls and first service. Keep your fingers crossed for me . Once I opened a case with GMC, my window showed up in two days, my appointment was made and I got a loaner car, which I was originally told, loaner car, no way. I was told that about the loaner car because I had not purchased the car at the dealership I am having the service done. Don't let the dealerships jerk you around on this, open a case, document everything from the day you discovered your leak, be courteous and professional with everyone you deal with, and then keep your fingers crossed. I'll update on the other side.

Posted
2 hours ago, Minnvmax said:

Is there a chance they will never leak? Mine built April 2019 hasn't yet.  

I'm dying to know this as well. I just checked and mine has the same build date as a recent poster. I haven't gone through an automatic carwash yet (mostly because I was worried about the mirrors clearing. This truck feels wider than my last one) but we have had some heavy rains in the 6 weeks that I have owned it.

Posted

It would be great to have a compiled list of build dates and plants and even which truck/cab size that each one is.

 

 

Posted

I agree. I have no use for the little tiny opening in the back window and would gladly have taken a solid rear window if it meant never having to worry about a leak...

Posted
15 minutes ago, disneybaker said:

Is the leak on 2020 also? Sucks they force it on you in option package

 

 

Sent from my iPhone using Tapatalk

 

Curious as well. Is there a certain build date after which they have addressed/solved this problem?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,427 Guests (See full list)


  • Latest Articles

  • Posts

    • Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
    • Sure about that? A degree wheel and a dial indicator would lower your degree of assurance in that statement. 😉    It why we have offset keys and dialable timing sprockets. Just say'n.... I've built a few and have never seen one "On the money". 
    • I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed, regardless of whether they are in warranty or not, or in the hands of the original owner or not. Why not updates as well, especially since some of those can be safety related also?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...