Jump to content

Recommended Posts

Posted
On 2/24/2021 at 12:52 PM, Kclyatt said:

Update....Few months into sealing my rear glass and happy to report no further leaks. I recently sealed up my spoiler as a added guarantee because as we can see GM does not have our best interests in mind. I used door trim from Lowes and this particular type has ridges to help with the trim tool to push into the tight space and also has adhesive on the back to hold into place once set. The third brake light I used clear silicone (same type 3M) since that gap was too tight for trim.

 

Hope my enthusiasm to prevent future leaks helps another in this exclusive club of leakers!

trim.1.jpg

trim.2.jpg

Trim.3.jpg

Thank you for sharing this. Can you advise what 3m silicone you used and possibly provide a link? 
 

Thanks again,

JMF

Posted
10 hours ago, jftwist said:

Thank you for sharing this. Can you advise what 3m silicone you used and possibly provide a link? 
 

Thanks again,

JMF

 

4F71134E-0FEC-474F-907F-8679549FEDBE.png

Posted
28 minutes ago, Kclyatt said:

 

4F71134E-0FEC-474F-907F-8679549FEDBE.png

Thank you very much for your assistance. 
 

JMF

Posted

There is another type of self leveling 3m adhesive I believe that is called out in the TSB


Sent from my iPhone using Tapatalk Pro

Posted

Just curious if anyone who has a topper/camper shell if that's helped prevent or stop the amount of water coming in the cab from the rear window? 

Posted (edited)

TSB Sealing Repair Completed – UPDATE

 

Quick background – Picked up my ’21 Sierra on 12/4/20. Within 10 days of ownership I had the leak on both sides at the top of the slider. Dealer completed the TSB, and I could see a heavy bead of the sealer that was laid across the top frame of the slider.  After the TSB was done I didn’t see any leaks and continue to check very closely after every rain. I have a small towel sitting on top of the rear seat back rest just in case the slider starts leaking again. About a month ago during a steady rain I saw a drop of water from the same location - literally a few drips where it was barely leaking, but the towel on the seat back rest was dry to the touch as was the carpeting.

 

As others in this thread have suggested and since it was barely leaking I decided to try the flowable silicone (permatex 81730) rather than have the truck torn apart again. When we had a warm day I cleaned the top of the slider as best I could and also taped off the top of the glass on the slider to try and minimize the mess. I used a full tube of the permatex and made a few passes across the top of the slider frame, being careful to not overfill the area. As other posters have mentioned that have used this product it is thin and runny, so being careful minimizes the clean up.

 

Since using the flowable silicone 4 weeks ago we have had both snow and rain. Over the past week we have had significant rain, including long periods of drizzle, solid rain and heavy down pours. So far no leaks, so the effort was well worth it. I can see along the top of the slider frame where the flowable silicone has dried there is an even layer of silicone across the complete gap. It looks like the permatex product took care of any small gaps that the TSB work didn't completely seal. So far I’m really impressed with the permatex product and will use it again should I see a small leak in the future.

 

Pic below of where it was leaking and also of the permatex product used. Thanks to everyone that recommended this product and the idea.

 

 

leak.JPG

permatex.JPG

Edited by DSW1519
Posted
4 hours ago, DSW1519 said:

TSB Sealing Repair Completed – UPDATE

 

Quick background – Picked up my ’21 Sierra on 12/4/20. Within 10 days of ownership I had the leak on both sides at the top of the slider. Dealer completed the TSB, and I could see a heavy bead of the sealer that was laid across the top frame of the slider.  After the TSB was done I didn’t see any leaks and continue to check very closely after every rain. I have a small towel sitting on top of the rear seat back rest just in case the slider starts leaking again. About a month ago during a steady rain I saw a drop of water from the same location - literally a few drips where it was barely leaking, but the towel on the seat back rest was dry to the touch as was the carpeting.

 

As others in this thread have suggested and since it was barely leaking I decided to try the flowable silicone (permatex 81730) rather than have the truck torn apart again. When we had a warm day I cleaned the top of the slider as best I could and also taped off the top of the glass on the slider to try and minimize the mess. I used a full tube of the permatex and made a few passes across the top of the slider frame, being careful to not overfill the area. As other posters have mentioned that have used this product it is thin and runny, so being careful minimizes the clean up.

 

Since using the flowable silicone 4 weeks ago we have had both snow and rain. Over the past week we have had significant rain, including long periods of drizzle, solid rain and heavy down pours. So far no leaks, so the effort was well worth it. I can see along the top of the slider frame where the flowable silicone has dried there is an even layer of silicone across the complete gap. It looks like the permatex product took care of any small gaps that the TSB work didn't completely seal. So far I’m really impressed with the permatex product and will use it again should I see a small leak in the future.

 

Pic below of where it was leaking and also of the permatex product used. Thanks to everyone that recommended this product and the idea.

 

 

leak.JPG

permatex.JPG

What dealer did the original TSB for you?  I am also in Bucks County, and was thinking of taking it to Faulkner.  

Thanks in advance!

Posted
7 minutes ago, SPASierra said:

What dealer did the original TSB for you?  I am also in Bucks County, and was thinking of taking it to Faulkner.  

Thanks in advance!

I had the TSB done at O'Neil GMC in Warminster. They used an outside glass specialist and they did a good job. I can't even tell the truck had been touched. I bought this truck at O'Neil, and I'm very happy with how they've treated me - both in sales and service. I attribute the slight leak (after the TSB) to the crappy window frame design.  

Posted
1 minute ago, DSW1519 said:

I had the TSB done at O'Neil GMC in Warminster. They used an outside glass specialist and they did a good job. I can't even tell the truck had been touched. I bought this truck at O'Neil, and I'm very happy with how they've treated me - both in sales and service. I attribute the slight leak (after the TSB) to the crappy window frame design.  

Thanks for the quick reply!  I will give them a call!

 

Posted
Thanks for the quick reply!  I will give them a call!
 
No problem. Dave the service manager is a really good guy.

Sent from my Pixel 3a XL using Tapatalk

Posted

I have a 2021 1500 AT4, I've washed it once and didn't notice any leaking. Only 1200 miles on it and I garage it every night. Tagging this thread for when mine does start leaking..

 

Posted
9 hours ago, Wormydog1724 said:

I have a 2021 1500 AT4, I've washed it once and didn't notice any leaking. Only 1200 miles on it and I garage it every night. Tagging this thread for when mine does start leaking..

 

Hopefully you won't need to.

Posted
I have a 2021 1500 AT4, I've washed it once and didn't notice any leaking. Only 1200 miles on it and I garage it every night. Tagging this thread for when mine does start leaking..
 
Washing doesn't usually have enough standing water to get the leak going like sitting in the rain. Wish you luck. So far my 2nd attempt, replaced whole window, has worked.
Posted

Add me to the list, 2020 AT4. Built Nov 2019 in mexico. 17,000 miles. Home garage, and work garage, and live in PHX, so not much water exposure. I'll probably wait a while to see if GM can come up with a good fix.1cb891b6f0ea35301c51b01c23234629.jpg7eebef29ea3335764b63e79080920844.jpg

Sent from my Pixel 5 using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • That should answer the maximum depth difference between the stock and the PPE so its not hugely lower. As to the PML pan, they don't make any claims that it fits the L8T with the same transmission and in fact leave their information confusing, however on the surface it says "for Duramax" and so its hard to say. I know a while back and not sure which brand it was that specifically stated that the extra capacity pan that particular company made did NOT fit the gas version. 
    • There are several versions of the 5100's. Some for stock height, some for leveled, some for lifted.    Side note. I finally had a chance to tow with my 30' gooseneck with about 10,000 lbs of material on it this past week. Hands down the 5100's made the trailer towing much more stable and comfortable. I even had 10 cmu blocks in the bed. What a difference over the stock shocks. 
    • According to PML, the stock pan is 4.3" deep - (PML info): Dimensions: at deepest area, PML pan is 7 inches, stock pan is 4.3 inches    PPE is 5.4" so roughly 1.1" deeper than stock
    • I had not realized that PPE has come out with a version of a cast aluminum oil pan specific to being able to fit onto the 10L1000 with the L8T engine sometime this spring. I was doubting that anyone would come out with something beyond what Dorman had in more of a direct factory pan swap. I see from one comment that is on the PPE site that they found the pan to be tighter to install then the factory unit and having to flex the exhaust down to fit it. I didn't lookup any specs if they have any as per how much lower it hangs but as it holds more oil and has fins outside the pan it would no doubt hang a certain amount lower.    I looked back at the site and they do have some depth measurements to get a rough comparison to the factory pan total height or hang down if you will at the front and rear of the pan so that will give a good idea how much further down this pan would end up being for ground clearance issues.    2024-2026 GM 6.6L Gas 10L1000 Heavy-Duty Cast Transmission Pan – Pacific Performance Engineering    
    • I'm in constant amazement over the number of people that do oil maintenance by how they feel, what they were told, what materials cost, what brand A claims vs brand B.     Come to think of it, this behavior isn't exclusive to oil. 🤔 They drive this way too. 😬   There is a 20 plus page thread on BITOG on Mobil 1 Advanced Clean vs Valvoline Restore and Protect it would be amusing if it were not so........humanly pitiful.   Last Sunday we were are sitting at services and listening to a speaker talk about Jesus parable of the wide and narrow gates and he said something that hadn't dawned on me but totally fit the way people in general are about just about everything. He said there are so few people on the narrow path leading to a good reward not because the the narrow gate was hidden or hard to find but because the wide gate leading to a bad end it so darn easy and uncomplicated to follow!!!             
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...