Jump to content

Recommended Posts

Posted

Especially if most of the time what people are all up in arms about will change in hours or days. It doesn’t take much to take a breath and realize that. Some things take longer. Electric vehicles for example. A good idea potentially once the bugs are worked out. Yet they were pushed like the greatest thing ever. Mandates, rebates everyone fell in line. Then reality set in. Reality is the great equalizer. Sometimes it has to slap people in the face. Sometimes it takes a minute. 

Posted

Most people fail to realize that in 100 years from now, what they say and how they say it, doesn't really matter to anyone but themselves.  No one is going to remember what they said (unless they were someone famous and it got documented).  That is why I have been refraining from adding to many of these non-truck related discussions.  Folks need to keep the emotions out of their posts, and fact check themselves so that what they say can't be refuted.  Provide their sources, not just say "I read it somewhere" or "so and so said it".  Really??  There is too much misinformation and extremism in the world.  We don't need it here. 

 

There are a lot of smart intelligent members on this forum.  They are a great source of automotive information.  I have a lot of respect for these members.  But you know, when a few of them start straying from truthful information, I lose a bit of respect for them.  

 

That's my 2 cents worth.

  • Like 2
Posted
18 hours ago, txab said:

Now, that being said, the site does discourage topics of religion and politics.

 

I hope you see the humor in that boss man. :) 

 

'Religion' is an identifier to let others know how and too whom or what we worship. That is, "We are devoted to".

 

Human's by nature have a spiritual need. You never see a family of squirrels sitting on a log in front of an old wise owl giving a sermon on XYZ. (dodging a bullet less I miss being funny).  

 

And humans will worship more than a deity. A large segment of humanity worships money. Possessions. Power. Fame. But point is, we all worship something. Somethings we can talk about and some we cannot. 


SO....what we really mean is we discourage unapproved religious and political topics. 

 

Grandmother gave me two jobs in life. Be in the way and make things difficult. I'm really good at both. Grams is proud. :) 

 

 

  • Thanks 2
Posted
3 hours ago, PhilB said:

Most people fail to realize that in 100 years from now, what they say and how they say it, doesn't really matter to anyone but themselves.  No one is going to remember what they said (unless they were someone famous and it got documented). 

 

I almost fell out of my chair. You mean like the Bible? Don't worry. Few pay it much attention. 😉

 

PS. I enjoyed your post. :) 

Posted
3 hours ago, PhilB said:

Most people fail to realize that in 100 years from now, what they say and how they say it, doesn't really matter to anyone but themselves.  No one is going to remember what they said (unless they were someone famous and it got documented).  That is why I have been refraining from adding to many of these non-truck related discussions.  Folks need to keep the emotions out of their posts, and fact check themselves so that what they say can't be refuted.  Provide their sources, not just say "I read it somewhere" or "so and so said it".  Really??  There is too much misinformation and extremism in the world.  We don't need it here. 

 

There are a lot of smart intelligent members on this forum.  They are a great source of automotive information.  I have a lot of respect for these members.  But you know, when a few of them start straying from truthful information, I lose a bit of respect for them.  

 

That's my 2 cents worth.

It’s really easy to see the path ahead. From my earliest experience in school people form groups. Usually the first group are bad guys. I usually group up the good guys. The bad guys left us alone because we were bigger. Our group grew and lasted all through school. Even some bad guys joined in. And became good. We had more fun. Common sense was our path. That’s what’s happening now. It’s easy to see the path ahead. It’s not a new path.

Posted (edited)
9 minutes ago, KARNUT said:

It’s really easy to see the path ahead. From my earliest experience in school people form groups. Usually the first group are bad guys. I usually group up the good guys. The bad guys left us alone because we were bigger. Our group grew and lasted all through school. Even some bad guys joined in. And became good. We had more fun. Common sense was our path. That’s what’s happening now. It’s easy to see the path ahead. It’s not a new path.

Guess it’s gonna get lonely here in bad boys group! Lol

Except Grumpy is here with me. 😂

Edited by customboss
Posted
1 hour ago, Grumpy Bear said:

 

I hope you see the humor in that boss man. :) 

 

'Religion' is an identifier to let others know how and too whom or what we worship. That is, "We are devoted to".

 

Human's by nature have a spiritual need. You never see a family of squirrels sitting on a log in front of an old wise owl giving a sermon on XYZ. (dodging a bullet less I miss being funny).  

 

And humans will worship more than a deity. A large segment of humanity worships money. Possessions. Power. Fame. But point is, we all worship something. Somethings we can talk about and some we cannot. 


SO....what we really mean is we discourage unapproved religious and political topics. 

 

Grandmother gave me two jobs in life. Be in the way and make things difficult. I'm really good at both. Grams is proud. :) 

 

 

Agreed.

 

We generally only "discuss" things we disagree with one another on. No point in talking if everyone thinks like you. Not much to be said

  • Thanks 2
Posted
5 hours ago, PhilB said:

Most people fail to realize that in 100 years from now, what they say and how they say it, doesn't really matter to anyone but themselves.  No one is going to remember what they said (unless they were someone famous and it got documented).  That is why I have been refraining from adding to many of these non-truck related discussions.  Folks need to keep the emotions out of their posts, and fact check themselves so that what they say can't be refuted.  Provide their sources, not just say "I read it somewhere" or "so and so said it".  Really??  There is too much misinformation and extremism in the world.  We don't need it here. 

 

There are a lot of smart intelligent members on this forum.  They are a great source of automotive information.  I have a lot of respect for these members.  But you know, when a few of them start straying from truthful information, I lose a bit of respect for them.  

 

That's my 2 cents worth.

Also agreed!

  • Like 1
  • Thanks 1
Posted

I belong to a few forums, this one is the only one with regular banter about anything and it's due to a few members.  

  • Like 1
Posted
58 minutes ago, diyer2 said:

I belong to a few forums, this one is the only one with regular banter about anything and it's due to a few members.  

I don’t. Even though I’m retired I have a life. I only have one GM vehicle. I am a GM fan. Through my research I found a Dealer here locally that does warranty forever. They sell most brands. That brings GM back into my view. GM doesn’t make a rear drive large sedan anymore or a minivan. I wouldn’t even consider the Traverse in the past. But with all wheel drive and that dealer warranty, it could happen. As far as getting off subject. It’s the only reason I ever click on this website. If a guard rail gets dinged. There’s someone around to adjust it back. Otherwise it would get quite boring. There’s really only a few people who know these advanced vehicles. Even doing brake jobs on these new vehicles takes researched. So if you want to keep eyes on the site a little leeway is a must. 

  • Like 1
  • Thanks 1
Posted
41 minutes ago, KARNUT said:

As far as getting off subject. It’s the only reason I ever click on this website. If a guard rail gets dinged. There’s someone around to adjust it back. Otherwise it would get quite boring. There’s really only a few people who know these advanced vehicles. Even doing brake jobs on these new vehicles takes researched. So if you want to keep eyes on the site a little leeway is a must. 

 

I mentioned to a friend the other day, "I like conversation but not so much confrontation."

 

I enjoy talking to my wife but I don't like fighting with her. And yet it will happen from time to time. We don't have a @txab at home. 

 

I've been on several sites over the years. Got bounced off a few. Moderated a few. It's tough job and not everyone is well suited for the job. We have a gem of a moderator. 

 

 

  • Like 1
  • Thanks 1
Posted
1 hour ago, Grumpy Bear said:

 

I mentioned to a friend the other day, "I like conversation but not so much confrontation."

 

I enjoy talking to my wife but I don't like fighting with her. And yet it will happen from time to time. We don't have a @txab at home. 

 

I've been on several sites over the years. Got bounced off a few. Moderated a few. It's tough job and not everyone is well suited for the job. We have a gem of a moderator. 

 

 

Once I was convinced my wife is always right. The little we may have argued ended.😆 Now if she could just be faster getting ready to go. 

  • Haha 3
Posted
56 minutes ago, KARNUT said:

Once I was convinced my wife is always right. The little we may have argued ended.😆 Now if she could just be faster getting ready to go. 

Never going to happen Stan my wife is the same way. I can be ready to go when waking up out of bed in in 10-15 minutes that's including a shower but with her nooooooo at least close to 1hr. We can be ready to head out the door and she will be grabbing her purse and stuff I go out and get in the truck and iam waiting and waiting almost to the point of my blood pressure rising then here she comes.

  • Like 1
  • Haha 1
Posted
2 minutes ago, Silverado4x4 said:

Never going to happen Stan my wife is the same way. I can be ready to go when waking up out of bed in in 10-15 minutes that's including a shower but with her nooooooo at least close to 1hr. We can be ready to head out the door and she will be grabbing her purse and stuff I go out and get in the truck and iam waiting and waiting almost to the point of my blood pressure rising then here she comes.

 You and a few million other husbands. 😉

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • 3.41 Kroger’s in Montgomery TX
    • I really wanted to go to the Fox 2.5's But they were like ~$1,500 vs ~$425 for the Bilsteins. And my research on FOX shocks was that they do not have a great reputation for longevity. I am sure they the FOX's are fantastic, but I know from experience the Bilsteins are rock solid for at least 150k miles. 
    • Conditions for Meeting a Cold Start   The ignition voltage is between 10 and 15 V. The barometric pressure (BARO) is more than 75 kPa. The engine coolant temperature (ECT) at start-up is less than 42°C (108°F). The intake air temperature (IAT) is between 2–32°C (36–90°F). The engine is OFF for greater than 6 hours or the following conditions must be met: The start-up IAT minus start-up ECT are within 12°C (22°F). The start-up ECT minus start-up IAT are within 50°C (90°F). Fuel level is between 25 and 75 %.   Circuit/System Verification Verify that all I/M System Status indicators report YES, and that no I/M Test DTCs are present.If any I/M Test DTCs are set Refer to Diagnostic Trouble Code (DTC) List - Vehicle. If no I/M Test DTCs are set All OK. Inspection/Maintenance (I/M) System Set Procedure   Warning: Refer to Road Test Warning. Note: Do NOT touch the accelerator pedal until told to do so. A change in TP Sensor angle or an increase in engine speed may invalidate this portion of the test.   Note: An I/M Test DTC will not be stored or erased from the ECU except at the end of trip processing, which occurs 5 s after ignition OFF.   Ensure that the vehicle meets the conditions for a cold start listed above. If the EVAP I/M System Status indicator displays NO, perform the EVAP Service bay test if applicable. Turn OFF all of the accessories; HVAC system, other electrical loads, including aftermarket/add-on equipment, etc., and open the hood.   Set the vehicle parking brake and ensure the vehicle is in park for automatic transmission or neutral for manual transmission.   Start and idle the engine for 2 min.   Close the hood, release the parking brake and Accelerate at part throttle to 72–80 km/h (45–50 mph) with this speed maintained until the engine reaches operating temperature, 8–10 min.   Continue operation under these conditions for an additional 6 min.   Accelerate at part throttle to 90 km/h (55 mph) with this speed maintained for 2 min.   Release the accelerator pedal for at least 10 s. This will allow the vehicle to enter the decel fuel cut off.   Safely stop the vehicle, with the engine in drive for automatic or neutral with the clutch pedal depressed and parking brake applied for manual. Allow the vehicle to idle for 2 min.   Shift the vehicle to park for automatic and neutral for manual. Turn OFF the ignition and exit the vehicle. Do NOT disturb the vehicle for 45 min.   Observe the Inspection/Maintenance (I/M) System Status with a scan tool. All of the I/M System Status indicators should display YES.   If the EVAP I/M System Status indicator displays NO, turn OFF the ignition, ensure that the vehicle meets the conditions for a cold start, and repeat steps 6-11 three more times, or until the EVAP I/M System Status indicator transitions to YES. If the indicator continues to display NO, refer to the Inspection/Maintenance (I/M) System DTC Table to identify the DTCs that did not run.   If any of the I/M System Status indicators display NO, refer to the Inspection/Maintenance (I/M) System DTC Table for the indicator which did not display YES. The I/M System DTC Table identifies the DTCs associated with each I/M System Status Indicator.   Observe the I/M Test DTC information with a scan tool. Verify there are no I/M Test DTCs present. If an I/M Test DTC is set, diagnose the DTC using the Diagnostic Trouble Code (DTC) List - Vehicle and refer to Inspection/Maintenance System Check.   Observe the engine DTC information with a scan tool. Verify no DTCs are present. If a DTC is set, diagnose using the Diagnostic Trouble Code (DTC) List - Vehicle. After repairs, perform the Inspection/Maintenance Complete System Set Procedure to verify no further DTCs are set.       Looks like one procedure to me.  Repeated as necessary.
    • My 2020 AT4 6.2 has had the valve spring issue addressed at ~200 miles, front cover/pump replaced at 18k, water pump at 34k and idler pully at 65k.  I would agree with ditching by 100k unless you elect to go with upgraded hardware...say built 10l80 and an lt4 or l8p swap.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...