Jump to content

Recommended Posts

Posted
On 9/21/2019 at 6:33 PM, Ezekiel2517 said:

Looks great. Just curious.  When folks are going with 305s and aftermarket wheels, why not do a 20x10 wheel?  Wouldnt you need less backspacing then?  If seen several 305s on aftermarkets and they are all 9" wheels.

Because the 20x10 won’t fit without rubbing Or alot of trimming.  Unless you go with more lift.  Even with the 20x9 mine still rubbed.  Had to remove bracket behind mud flap for clearance.

Posted
On 9/20/2019 at 8:10 PM, jordanl010 said:

Great looking truck. Do you have a link to this kit by chance?

 

What height are you running your coilovers? If max, do you have a diff drop? Sorry for the question parade... lol super interested in this setup.

No problem on the questions. 

 

They don't show a specific c/o kit for the 19, but they have King build and tune them to match for you once ordered. 

 

Here is a link to the uppers. https://www.bajakits.com/i-31570226-19-silverado-sierra-1500-4wd-upper-arm.html?ref=category:1459192

 

I am running the full 3". I have been letting them settle before I adjust again. I am coming down about a 1/2" in the front. Although CV angles are pretty good and the truck drives great. 

 

JT at Baja Kits is awesome. Great customer service and they get back to you with any questions very quickly. 

Posted

New to the board and I just replaced my wheels from the stock 20" LTZ rims to the 22" Chevy rims... I do plan on keeping both sets of tires as I heard the Bridgestone Alenza tires are terrible during the winter time.

 

3BDB3E70-5406-45A9-B601-A351668B3066.JPG

  • Like 3
Posted (edited)

Kept the 22" OEM wheels on my High Country and went with the Fabtech 4" lift with 285/55R22 Nitto Ridge Grapplers. Used 1-1/4 Spacers and still had to trim a bit, but not too much at all.. 

fullsizeoutput_10f7.jpeg

Edited by Gamecock12
  • Like 7
Posted
Kept the 22" OEM wheels on my High Country and went with the Fabtech 4" lift with 285/55R22 Nitto Ridge Grapplers. Used 1-1/4 Spacers and still had to trim a bit, but not too much at all.. 
fullsizeoutput_10f7.thumb.jpeg.3e99819f95119f3d672f3ffb18167805.jpeg
Nice!!!

Sent from my SM-N960U using Tapatalk

Posted
7 hours ago, foxcoupefan said:

No problem on the questions. 

 

They don't show a specific c/o kit for the 19, but they have King build and tune them to match for you once ordered. 

 

Here is a link to the uppers. https://www.bajakits.com/i-31570226-19-silverado-sierra-1500-4wd-upper-arm.html?ref=category:1459192

 

I am running the full 3". I have been letting them settle before I adjust again. I am coming down about a 1/2" in the front. Although CV angles are pretty good and the truck drives great. 

 

JT at Baja Kits is awesome. Great customer service and they get back to you with any questions very quickly. 

How about your differential?  Did u have to drop it or chop crossmember at 3"?

Posted
1 hour ago, Ezekiel2517 said:

How about your differential?  Did u have to drop it or chop crossmember at 3"?

No and none of the companies doing similar set ups seem to require it. The CVs are definitely angled but from other trucks I have seen it seem minimal. 

  • Like 1
Posted
4 hours ago, Gamecock12 said:

Kept the 22" OEM wheels on my High Country and went with the Fabtech 4" lift with 285/55R22 Nitto Ridge Grapplers. Used 1-1/4 Spacers and still had to trim a bit, but not too much at all.. 

fullsizeoutput_10f7.jpeg

Looks great but you had to cut with OEM 22” wheels and 285/55R22’s? I’ve got the 3” kit and same tire and wheel set up and I have very little rub, only under certain situations it rubs, not enough to even trim. Something sounds odd. 

  • Like 1
Posted
20 hours ago, foxcoupefan said:

No problem on the questions. 

 

They don't show a specific c/o kit for the 19, but they have King build and tune them to match for you once ordered. 

 

Here is a link to the uppers. https://www.bajakits.com/i-31570226-19-silverado-sierra-1500-4wd-upper-arm.html?ref=category:1459192

 

I am running the full 3". I have been letting them settle before I adjust again. I am coming down about a 1/2" in the front. Although CV angles are pretty good and the truck drives great. 

 

JT at Baja Kits is awesome. Great customer service and they get back to you with any questions very quickly. 

Thank you so much!

  • Like 1
Posted

Had center cap stickers made

3D stickers.com

Should be here today

3910dc27320d9aa56a4ea44c58ad46f4.jpg

 

 

Sent from my iPhone using Tapatalk

 

  • Like 3
Posted
1 hour ago, Opiedeegs said:

Dipped my stock wheels waiting on black Center caps
8fe83acd497a960072d0e8566031f637.jpg


Sent from my iPhone using Tapatalk

How many coats did you do? Did you tape off the tire or just spray away and peel off the over spray? 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Can someone tell me where the video processing module is in a 2023 Silverado? I'm getting conflicting results that it's in the front passenger area or the rear passenger area behind the seat.
    • Yes I agree, its what amounts to free advertising to let people know about his UOA testing company, and not that there is anything wrong with that but certainly that is a motivator for putting out videos about the science of oil as well as other topics such as oil and air filtration etc. The interesting part I found with his last video is not only the physics behind the reason for the varying wear due to a diesels working torque range causing more bearing load and that higher viscosity oil is of benefit, it was also that the chemistry behind the GM Dexos 0W-20 and the Mobil Dexos licensed 0W-20 are far enough apart that its showing up with a difference in wear even though the two oils are matched in viscosity and in that comparison viscosity was not having the finger pointed at it.    There are a few youtubers out there or one anyway that I have watched a bit of who has gone through the pains of accessing various countries manuals for a certain engine platform and while in the US/Canada it may say use 0W-20 or what have you for some Toyota product, in some other countries it sings a very different tune for the very same engine with the typical traditional oil viscosity/ambient temperature charts to help choose which oil viscosity is correct for the conditions the vehicle will be used in and in some cases its taken an engine in a US manual that states only use 0W-20 as per warranty coverage and yet that same engine in certain other countries may have up to a 15W-40 etc oil option that meets the spec. Another words the guy who is driving through Death Valley or Phoenix and south weather at 120f is often being fed a line of bs by the US system that has forced vehicle companies to restrict the warranty to a specific low viscosity oil for anterior reasons as well as the long drain interval suggestions.    Thankfully youtube is free ( yet anyway ) for viewers to sift through information and of course comes with the good and the bad ( truth and lies ) and we can choose to turn off/not watch what a person finds is bs or just not interested in the topic.         
    • No doubt... But, as someone who doesn't pay for his services, but who has provided a few views/clicks on his Youtube platform, the data around the Mobil oil testing I think does have some value including to "freeloaders" like me.   A lot of what he's doing is likely showing the OE's work in their oil selection, something that many of us had kind of assumed was true all along, a good balance of both excellent protection and efficiency.
    • Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...