Aftermarket Upper Control Arms

[gmcdawg]

Iron, what kinda labor price you get to install the Eibach kit and UCa's, cause I'm shopping labor for the same and just wondering how they compare.

[IronVilkas]

Iron, what kinda labor price you get to install the Eibach kit and UCa's, cause I'm shopping labor for the same and just wondering how they compare.

It was 750 total. I was originally quoted at 550 but they said it took longer to disassemble and reassemble the front struts than expected and the alignment shop had to charge extra becuase they had to change the balljoint set up to get it to align properly.

If you are going to use Kryptonite UCAs have them install the balljoints through the top for a 2.5in level. If they bolt them to the bottom of the arm it wont be able to be aligned. It will say in the instructions to do it on the bottom but that seems to be wrong for the eibach kit.

Sent from my Pixel 2 XL using Tapatalk

[gmcdawg]

I've got the Cognito arms, but will def check on that to see if mine need to be installed the same way.

[3tspapat]

Yea cognito's instruction also says to mount from top. 

 

Any cutting required with the krypto?

[gmcdawg]

Thanks Tom

[IronVilkas]

Yea cognito's instruction also says to mount from top. 
 
Any cutting required with the krypto?

No cutting required but you can see in this pic the droop stops are pretty close, I might cut them myself

Sent from my Pixel 2 XL using Tapatalk

[5RWill]

Any updates on this?