Jump to content

Recommended Posts

Posted

Hey All! New to the site and new Chevrolet owner. I have a 17' Silverado in the Scar'e blue (or deep ocean metallic)

Anyway its new to me but only has 30000kms (18700 miles)  on it and I seem to notice the paint is weak!

I have a ton of scratches on the rockers where the pervious owner must of dragged his feet to get it and even on my box right after the mud guard where its rocker guarded, i;ve noticed chips.

Now its cold here in northern Ontario, but I bought a paint pen and spring is around the corner

anyways! Do any of you have this issue of weak paint? and if so do any of you know about the strength of the primer (like will it take a while to rust?)

 

Thanks !!!

Posted

Is the primer good? 

Posted
On 3/3/2021 at 6:32 PM, KDP85 said:

Is the primer good? 

No doubt the paint is very fragile, I have scratches and chips everywhere but for a seven year old truck it's really not too bad. Nothing a good annual detail or touch up pen hasn't fixed.

With regards to the primer, I'm not too familiar on the science behind how the K2s were painted from the factory, but I will say that they are pretty dang resistant to corrosion. Granted, they're not terribly old yet, but I have yet to see a K2 with any sort of rust on the exterior paint and if there is one it's very rare. Just as an example, I have a nasty scratch/dent near my driver's side headlight that was the result of an object hitting me on the highway almost five years ago that hasn't shown any signs of rust whatsoever. My bed is also painted (no liner) and was used for work by the previous owner, totally abused, but it hasn't rusted at all!

So yeah, the paint is incredibly delicate. It's very frustrating, especially for you I'm sure because of that nice color. Fortunately, if any rust shows up it is in very small areas to the point where you can just dig it out and touch the area up. Had a nasty chip on my tailgate that was pretty deep; ended up showing signs of rust. Touched it up and now it's a distant memory! Hopefully this information helps you out. 🙂

Posted

Similar experiences here with my white '17. Started noticing paint chips on the front fender, both doors, rocker panel, and now rear fender. Touched them up last fall before it got cold here in Minnesota. Will need to make another pass when things warm up again. Encouraging to hear that rust doesn't seem to be a major issue - fingers crossed that's the case. 

Posted

I hear you on the thin, brittle, fragile paint. I have some marks on the rocker below the door as well. This is where the older generation of trucks had a better design IMHO. The door covered the side of the rocker. I know the K2 and T1 trucks are triple sealed doors but we have a 2013 GMT900 in the family and that truck is just as quiet as my 2018. 

Posted

Pepper is now going on seven years since manufacture and at first I cursed this paint. Applied so thin it never reaches full color depth. Then I got a few chips and even hit once and discovered that while the color coat is indeed thin the clear coat is awesome. What it is, it's hard. Yes hard paint chips easier BUT during repairs it is VERY forgiving. I can fill and color sand to near perfection with an art brush and some patients. I have to point out the defects for ANYONE to notice them (except the first one I was still learning on). My paint guy wanted to hire me for lot repairs LOL. Yea, not all paints are that forgiving. I find the primer top drawer EXCEPT on white trucks. (Code WA 8624) Whatever they put under that color.....junk....Color too. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Kudos? Are any of them desirable? Class leading (in any metric)?
    • Those are great questions, Bill. Our team looked into your VIN and it doesn't appear to have AFM or DFM. Please know, we take the personal and private information of our customers seriously, and we don't recommend posting your full VIN publicly. As for Auto Stop, some vehicles have a button to turn Stop/Start off for one ignition cycle. If the vehicle is equipped with the Stop/Start deactivation switch, you can push the switch to turn off Stop/Start. Stop/Start is turned off when the LED indicator on the switch is not illuminated. If you have any further questions, please visit https://s.chevy.com/support-request and fill out the support request form with all pertinent details. This form helps our team gather the right information and ensures your request is routed appropriately. 
    • She's laughing all the way to the bank.
    • There's a new PI on 2023-2026 L3B shudder.  Possible faulty front oxygen sensor.   Dealer can pull up PIP6060A and give it a read.  
    • Also here's the drive cycle for a 2021 Yukon with V8.  DO NOT USE THE CRUISE CONTROL WHEN RUNNING DRIVE CYCLE!!!!!:   Warning: Road test a vehicle under safe conditions and while obeying all traffic laws. Do not attempt any maneuvers that could jeopardize vehicle control. Failure to adhere to these precautions could lead to serious personal injury and vehicle damage. Note: You have completed this procedure when all parameters display Complete. Short stops for traffic will not affect the procedure. Note: Do NOT use cruise control during this procedure. Ignition/Vehicle » Off — For greater than 8 h Verify the scan tool parameter: Cold Start-Up = Yes If not the specified state Ignition/Vehicle » Off — For greater than 8 h & Repeat this step If the specified state Ignition » On / Vehicle » In Service Mode — For 1 min Engine » Idling — For 2 min Drive the vehicle while maintaining the following conditions for 20 min: Part Throttle Vehicle Speed = 24 to 97 km/h (15 to 60 MPH) Safely stop the vehicle Operate the engine/vehicle within the following conditions: Accelerate the vehicle to 64 km/h (40 MPH) Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 10% and 13% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 13% and 16% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 16% and 19% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 19% and 22% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 22% and 25% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Maintain steady state throttle at 89 km/h (55 MPH) — For 10 min Safely stop the vehicle
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...