Jump to content

Recommended Posts

Posted

 

How are the angles on the ball joints up front?

Here is a shot of it on the ground

 

ef025aca545712f4a18566415f409239.jpg

Posted

Awesome thank you

I don't know a ton about these trucks. How do the angles look?

Posted

67FA2072-D66E-4877-A04B-C590E54E2B92_zps

 

BAE018DC-AA72-446A-B2EF-13697819E1D9_zps

 

 

DEFC2102-5559-47AE-8E48-E9D94A6841AE_zps

 

RC under the strut spacer only.

 

BFG 275/65-20

 

I plan on adding the top spacer and swapping the rear blocks this weekend with an alignment next week.

 

I have a 2014 SLT and this is the exact look I am looking for. Slight leveling, with BGF on the 20" aluminum wheels.

 

I know very little about top spacers, swapping rear blocks... what does that do?

 

What size level kit is the Rough Country you used? Is your truck a 2014, 2015 or 2016?

Posted

Typically the front spacers are 2" for the lower spacer and .5" for the upper. The rc 2.5" kit has both top and bottom spacers and the rear block will lift it another inch in the rear.

  • Like 2
Posted

The front lower spacers are actually just 1" thick that give 2" of level. I have no idea how that works.

 

So a 2" leveling kit is a 1" spacer.

Posted

Finally got some rubber. Went with ko2 275/60/20 with a 1.5" motofab. No rubbing at all. Very happy with the ride.

post-154383-0-94492600-1464831554.jpg

post-154383-0-85097600-1464831574.jpg

post-154383-0-12847400-1464831594.jpg

post-154383-0-39029000-1464831616.jpg

post-154383-0-94492600-1464831554.jpg

post-154383-0-85097600-1464831574.jpg

post-154383-0-12847400-1464831594.jpg

post-154383-0-39029000-1464831616.jpg

post-154383-0-94492600-1464831554.jpg

post-154383-0-85097600-1464831574.jpg

post-154383-0-12847400-1464831594.jpg

post-154383-0-39029000-1464831616.jpg

post-154383-0-94492600-1464831554.jpg

post-154383-0-85097600-1464831574.jpg

post-154383-0-12847400-1464831594.jpg

post-154383-0-39029000-1464831616.jpg

Posted

Pretty poor pics will try to get some better ones soon

 

Yeah they only open up to a 1 inch by 1 inch pic on my end cant tell anything haha

Posted

Hope these pics turn out a bit better. Just got window visors today. Trucks not shining but ya get the idea. 1.5" motofab, couldn't be happier

post-154383-0-30341800-1464909223_thumb.jpg

post-154383-0-90543100-1464909241_thumb.jpg

post-154383-0-60608000-1464909260_thumb.jpg

post-154383-0-97971900-1464909283_thumb.jpg

post-154383-0-30341800-1464909223_thumb.jpg

post-154383-0-90543100-1464909241_thumb.jpg

post-154383-0-60608000-1464909260_thumb.jpg

post-154383-0-97971900-1464909283_thumb.jpg

post-154383-0-30341800-1464909223_thumb.jpg

post-154383-0-90543100-1464909241_thumb.jpg

post-154383-0-60608000-1464909260_thumb.jpg

post-154383-0-97971900-1464909283_thumb.jpg

post-154383-0-30341800-1464909223_thumb.jpg

post-154383-0-90543100-1464909241_thumb.jpg

post-154383-0-60608000-1464909260_thumb.jpg

post-154383-0-97971900-1464909283_thumb.jpg

  • Like 1
Posted

Hope these pics turn out a bit better. Just got window visors today. Trucks not shining but ya get the idea. 1.5" motofab, couldn't be happier

 

What offset are you running??? I've also got the 1.5in motofab kit and was looking into 275/60/20s but wasn't sure it wouldn't rub. I'm looking into +12 to +00 for my offset on 20x9 rims. Thanks

Posted

XD spy +18. I live on a dirt road and I tried to get it to rub and it cleared fine with the mudguards

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I'm also waiting to see if they confirm Apple CarPlay, because I'm not interested in subscription fees just to use the hardware I already purchased.    In closeups it looks like it gets the Colorado/Canyon center screen based headlight controls which I despise. They also appear to lose all the hard switches for functions like seat heating and cooling, parking sensors, lane control, traction control, etc. which means they're all screen/menu based, so verdict is out on how well those will work with gloves or wet/dirty hands.  Admittedly they don't show the left knee area of the dash, but I don't see hard switches for locker control on the ZR2, and the "mode" switch appears to eliminate the rotary dial with a quick way to access tow/haul.  My 2021 has had multiple screen failures and at times the screen just locks up, goes black, or reboots while driving even after replacement, so loosing the ability to access many of these functions, especially lighting control would be pretty frustrating.   There aren't enough photos or detailed trim details other than one mention of "available microfiber trim" to confirm, but the use of microfiber on the seats and or center console is a deal killer for me.  Just because you drive a ZR2 or High Country, doesn't mean you don't work out of it, and that material is difficult at best to keep clean and looking decent.   Lexus and several other brands are using it on seats, dash, and door panels now, I assume as a cost and weight saving measure,  and it looks horrible 1-2 years into ownership.  I see what appears to be piano black on the doors and center console in some photos, which also has no place in ANY vehicle in my opinion because it mars and scratches too easily, especially for a truck.  Will be interesting to see what GMC comes out with when the Sierra is released as far as materials go.      
    • Im a fan.  Simply moving the screen up helps the look of the interior.  I feel like GM dropped the ball on the current gen having the screen not at the same level as the top of the gauge cluster.  The GMCs look better with the vents above the screen to close that gap.  
    • I hear you, its just not something one would even think of that the new oil in the container isn't filtered to a spec one would expect it to be.    As to a passenger vehicle theme and the maintenance requirement to meet to ensure a warranty is honored, these days with claims of life time transmission fluid on some models and the limited amount of oil changes that would bring one to the end of the factory warranty, that sells vehicles for those that like to hear "easy care maintenance free", but the manufacturer certainly knows different as to what that more than likely means for the longevity of some of the components if given that minimum spec maintenance. Then again I imagine there are a fair number of people that really don't care as long the vehicle gets them a certain number of years down the road because they are the type that want the next new thing, new and improved ... more bells and crap etc on the new one on the show room floor. Manufacturers have learned the phycological game to entice the customer out of their money !
    • Why soooooo many screens? Shall we just replace the windshield with a large plasma?!?!? Besides that I like the looks. And they added back the additional door cubbies,    No SS???
    • 3.39 Kroger’s in Montgomery TX
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...