2014+ Leveling Kits

BugzzyZ71 · October 1, 2019

23 hours ago, acinquegrana said:

What kind of tires?

Sent from my SM-G950U using Tapatalk

Atturo trail blade mt

33x12.50r22

Frankielozano214 · October 12, 2019

Not sure what mine has as I bought it how it is for really good price with wheels, so I been told it’s a 2in leveling kit but idk it still sits alil higher then my friend’s truck here couple pictures of it would like to know what it has maybe one of you can help me figure it out. It’s on 20s 20x12.5 33s

Edited October 12, 2019 by Frankielozano214

Frankielozano214 · October 12, 2019

theJman · October 13, 2019

It's finally my turn to have something to post in this thread.

RC 2" Leveling Kit

Fox Performance 2.0 Shocks

Cooper Discoverer AT3 XLT 285-75R18

Edited October 13, 2019 by theJman

STRMTRPR · October 13, 2019

16 hours ago, Frankielozano214 said:

Not sure what mine has as I bought it how it is for really good price with wheels, so I been told it’s a 2in leveling kit but idk it still sits alil higher then my friend’s truck here couple pictures of it would like to know what it has maybe one of you can help me figure it out. It’s on 20s 20x12.5 33s

.. well that looks like a 2" block in the back.. can't see the front

Frankielozano214 · October 13, 2019

39 minutes ago, STRMTRPR said:

.. well that looks like a 2" block in the back.. can't see the front

So what is it like a 2in level? Or lift

R1talin · October 14, 2019

33x12.50 R22 Nitto Ridge Grapplers

OEM Wheels

2" wheel spacers

2.5" SuspensionMaxx front leveling Kit

Had to do minor plastic and metal trimming on the back inside of both front fenders to alleviate rubbing.

Matt_UKTX · October 15, 2019

8 hours ago, R1talin said:

33x12.50 R22 Nitto Ridge Grapplers

OEM Wheels

2" wheel spacers

2.5" SuspensionMaxx front leveling Kit

Had to do minor plastic and metal trimming on the back inside of both front fenders to alleviate rubbing.

This looks simply amazing... It's how they should have built the truck in the first place...

Edited October 15, 2019 by Matt_UKTX

Passport · October 18, 2019

Here is my 17, 2 inch MotoFab leveling kit with 275/60/R20 tires. Rides as issued

Edited October 18, 2019 by Passport

Silv18 · October 24, 2019

So I've read a good 70% of this very informative thread. There is so much information that I'm having trouble deciding what I want. I was thinking motofab 2.5 with a 1 inch lift in the rear(2.25in block). I'm hoping that level front to back...or readylift 2.25 with a 2in rear block...and do I need control arms??? Is it worth it?

spenpet · October 24, 2019

11 hours ago, Silv18 said:

So I've read a good 70% of this very informative thread. There is so much information that I'm having trouble deciding what I want. I was thinking motofab 2.5 with a 1 inch lift in the rear(2.25in block). I'm hoping that level front to back...or readylift 2.25 with a 2in rear block...and do I need control arms??? Is it worth it?

70% of 487 pages? dang, that's impressive!

TXGREEK · October 24, 2019

It's finally my turn to have something to post in this thread.

RC 2" Leveling Kit
Fox Performance 2.0 Shocks
Cooper Discoverer AT3 XLT 285-75R18

Good looking truck, how do you like the Cooper XLT and what are your initial thoughts on them?

Sent from Above

TXGREEK · October 24, 2019

So I've read a good 70% of this very informative thread. There is so much information that I'm having trouble deciding what I want. I was thinking motofab 2.5 with a 1 inch lift in the rear(2.25in block). I'm hoping that level front to back...or readylift 2.25 with a 2in rear block...and do I need control arms??? Is it worth it?

Do coil overs, you’ll be thankful you did.

Sent from Above

theJman · October 24, 2019

2 hours ago, TXGREEK said:

Good looking truck, how do you like the Cooper XLT and what are your initial thoughts on them?

So far, so good. I have almost 600 miles on them now but that's all been in the dry; for whatever reason, when it's rained in NJ I've either been working from home that day or it was a weekend and I wasn't heading out. My research suggests they're good in the rain but I don't know myself yet. Looking at the number of wheel weights it seems like they might have been a challenge to balance, but they ride good. I get a little hum that starts about 40 but by 50-55 the road and wind noise drowns it out.

I wish I could tell you how much of the ride difference is due to the tires and how much is the shocks but unfortunately I can't. Fox told me not to put on the front ones until I did the leveling because they would likely bottom out so tires and shocks were done at the same time. I can tell you the combination makes the truck so much more stable going over rough roads. The factory Rancho's seemed to lack sufficient damping so ruts and uneven surfaces - especially on the highway - would unsettle the truck. The suspension movements were very sharp and exaggerated. There's one patch on my commute home that really used to be a white-knuckle affair. It's a slight bend in the road with a bridge and a dip on the left side (the right side has no dip). With the original Rancho's and Michelin's the truck would become difficult to keep in the lane as you hit the expansion joints and that dip during the curve, even if you were only going 70. Now, at 75 the truck barely reacts. For me that's a huge update, there's no more WTF moment when I get to that area.

One thing I do notice though is more back-and-forth wobble in the steering wheel when hitting bumps and potholes. The truck did that before but with the bigger/heavier tires and firmer shocks it's now pretty obvious. A steering stabilizer is in my future. For me that's an acceptable trade-off for what I gained.

Edited October 24, 2019 by theJman

TXGREEK · October 24, 2019

So far, so good. I have almost 600 miles on them now, but that's all been in the dry; for whatever reason, when it's rained in NJ I've either been working from home that day or it was a weekend and I wasn't heading out. All I've read about them says they're good in the rain but I don't myself yet. Looking at the number of wheel weights it seems like they might have been a challenge to balance, but they ride good.

I wish I could tell you how much of the ride difference is due to the tires and how much is the shocks but unfortunately I can't. Fox told me not to put on the front ones until I did the leveling because they would likely bottom out so tires and shocks were done at the same time. I can tell you the combination makes the truck so much more stable going over rough roads. The factory Rancho's seemed to lack sufficient damping and ruts and uneven surfaces - especially on the highway - would unsettle the truck. The suspension movements were very sharp and exaggerated. There's one patch on my commute home that really used to be a white-knuckle affair. It's a slight bend in the road with a bridge and a dip on the left side (the right side has no dip). With the original Rancho's and Michelin's the truck would become difficult to keep in the lane as you hit the expansion joints and that dip during the curve, even if you were only going 70. Now, at 75 the truck barely reacts. For me that's a huge update. Now there's no more WTF moment when I get to that area.

One thing I do notice though is more back-and-forth wobble in the steering wheel when hitting bumps and potholes. The truck did that before but with the bigger/heavier tires and firmer shocks it's now pretty bad. A steering stabilizer is in my future. For me that's an acceptable trade-off for what I gained.

You did do an alignment after the level, hopefully

Sent from Above