What have you done to your K2 today?

[wforrest08]

1 hour ago, Battle Born Offroad said:

AMAZING NEWS from BILSTEIN!!!

We have 130 sets of the new 6112 for the 14-18 Silverado and Sierra READY TO SHIP!!

                     HOLLY F#@KIN SH!T THEY DO EXIST 

  WERE THEY DELIVERED BY SASQUATCH RIDING A UNICORN PULLING SANTA’S SLEIGH ?

[Battle Born Offroad]

3 minutes ago, wforrest08 said:

                     HOLLY F#@KIN SH!T THEY DO EXIST 

  WERE THEY DELIVERED BY SASQUATCH RIDING A UNICORN PULLING SANTA’S SLEIGH ?

Close

Edited March 28, 2019 by Battle Born Offroad

[AdioSS]

I noticed that the center console latch in my Sister’s Tahoe & my Dad’s Escalade is chrome, but the one in my Sierra SLT is black, so thanks to this forum I found the part number & ordered a chrome latch. I installed it tonight. Getting the lid apart for the first time was a bitch! I was sure i was going to break the plastic. 

Edited March 28, 2019 by AdioSS
Added

[Jacoby]

Just dropped off my truck to get the 4.56's installed.  Im super stoked!!!!!  Forgoing any issues I expect my truck back tomorrow

[SS502]

19 minutes ago, Jacoby said:

Just dropped off my truck to get the 4.56's installed.  Im super stoked!!!!!  Forgoing any issues I expect my truck back tomorrow

That's gonna be fun

[SS502]

11 hours ago, AdioSS said:

I noticed that the center console latch in my Sister’s Tahoe & my Dad’s Escalade is chrome, but the one in my Sierra SLT is black, so thanks to this forum I found the part number & ordered a chrome latch. I installed it tonight. Getting the lid apart for the first time was a bitch! I was sure i was going to break the plastic. 

Well, post up the part number and a how to for those of us who are too lazy to search for it LOL

[300 Blackout]

Just dropped off my truck to get the 4.56's installed.  Im super stoked!!!!!  Forgoing any issues I expect my truck back tomorrow

That’s what I have and it’s a completely different truck. Make sure you break them in properly just in case you didn’t know they need to be broken in. Once they are good to go, turn off traction control and do a straight line pull in 4x4 if you have it. It’ll probably make you laugh and say what everyone else who swaps gears says, “why didn’t I do this sooner.” Let us know what you think about it once they are installed.

[Jacoby]

1 hour ago, 300 Blackout said:

That’s what I have and it’s a completely different truck. Make sure you break them in properly just in case you didn’t know they need to be broken in. Once they are good to go, turn off traction control and do a straight line pull in 4x4 if you have it. It’ll probably make you laugh and say what everyone else who swaps gears says, “why didn’t I do this sooner.” Let us know what you think about it once they are installed.

Yeah I know they have to be broken in.  Everybody's procedure is different though.  This is what they recommend

 

After driving the first 15-20 miles at around 60 mph, it is best to stop and let the differential cool completely – usually about 1hr.  You will do this 5 times for the first 100 miles of the breakin procedure. Maintaining a speed below 65 mph and driving conservatively for the first 500 miles is also advised. The gear oil should be changed after 500 miles. We recommend that you drive at least 500 miles before any heavy use or towing. During the first 45 miles of actual towing, only drive 10-15 miles at a time before stopping to let the differential cool.

[1SLOW1500]

Well, post up the part number and a how to for those of us who are too lazy to search for it LOL

I installed my chrome 3 weeks ago.

Sent from my SM-N960U using Tapatalk

[SS502]

1 minute ago, 1SLOW1500 said:

I installed my chrome 3 weeks ago.

Sent from my SM-N960U using Tapatalk
 

Now how did that help this lazy old man?

[1SLOW1500]

16 minutes ago, SS502 said:

Now how did that help this lazy old man?

I will help the elderly. HAHA 

22861304

[SS502]

Just now, 1SLOW1500 said:

I will help the elderly. HAHA 

22861304

LOL....thank you!

[Battle Born Offroad]

1 hour ago, Jacoby said:

Yeah I know they have to be broken in.  Everybody's procedure is different though.  This is what they recommend

 

After driving the first 15-20 miles at around 60 mph, it is best to stop and let the differential cool completely – usually about 1hr.  You will do this 5 times for the first 100 miles of the breakin procedure. Maintaining a speed below 65 mph and driving conservatively for the first 500 miles is also advised. The gear oil should be changed after 500 miles. We recommend that you drive at least 500 miles before any heavy use or towing. During the first 45 miles of actual towing, only drive 10-15 miles at a time before stopping to let the differential cool.

Throw 5 mins of driving around in figure 8s in there.

[jegreenwood14]

22 hours ago, H-town Silver Bullet said:

Your prepping process was similar to his?

I really want to do this as stage 2 to my chrome delete.

 

Sent from my SM-G955U using Tapatalk

 

 

 

 

Yup.  Sand, etching primer, sand, primer, wet sand, paint.  Super easy.

[jegreenwood14]

20 hours ago, texasaggies16 said:

Cleaned it!

Looked all over for that color, and could never find one exactly like I wanted.  I pass em all the time now, and the Chevy version, and am so jealous every friggin time!  Looks great!