What have you done to your K2 today?

Maxsuperdog · September 12, 2019

7 hours ago, Marv88 said:

I use AF in the majority of my installs lately and the GB series absolutely rocks! Where did you mount the tweeters and what other gear are you using?

Tweets are in the factory dash location.

Read below for the rest of my gear.

Jacoby · September 13, 2019

Got new tires installed. Fixed my clunky leaf springs and a squeak I had coming from the front. Truck is running good again.

Waterfowler41 · September 13, 2019

Dropped my diff like its hot... used the supreme suspension kit. The hardware was useless as it was 2” too short. 1/2” spacers hopefully resolved a low speed vibration i was having.

Sent from my iPhone using Tapatalk

Eddie 70 · September 14, 2019

I was able to get 2 out of 3 things done this morning that I wanted to get done.

I changed the rear wheel well liners this morning. They had been rubbed through before I got the truck.

I also installed rubber pads between the rear leaf springs. This was to quiet the rear clunk and so far it has done the job. I am very happy with those results.

The third thing I wanted to do was add an oil filler neck to make it easier to put oil in after an oil change. The oil filler neck I got put the neck at 90* out. So instead of the neck opening pointing up, it points toward the cab. Boo! Back to the drawing board on that one.

DirtyAndy · September 14, 2019

It came yesterday but I didn’t use it until today, but my Range AFM Disabler came in. V4 mode with my Carven exhaust wasn’t unbearable, but the drone and “buh buh buh” noise was just enough to irritate me.

Works perfectly. No more V4, truck drives great. Happy as a pig in crap.

1SLOW1500 · September 16, 2019

Who said lowered trucks on 24" can't do work 12 bags 16 blocks and still no rub and that is on lowest air bag pressure. Full air lifted it 2" more.
Air bags on all my trucks from now on.

Sent from my SM-N960U using Tapatalk

STRMTRPR · September 16, 2019

.. pulled off the chrome mustache on my bumper to remove the dent in the air deflector (left by some moron at work in the parking lot who used my truck as a limit stop for parking their vehicle) and reseat all the mounting clips so everything sits flush again. Bumpers are NOT a parking aid!

navyguy357 · September 16, 2019

Who said lowered trucks on 24" can't do work 12 bags 16 blocks and still no rub and that is on lowest air bag pressure. Full air lifted it 2" more.
Air bags on all my trucks from now on.

Sent from my SM-N960U using Tapatalk

Are those 24" replicas? where did you get them in

Sent from my SM-G955U1 using Tapatalk

1SLOW1500 · September 16, 2019

Yes they are replica wheels. Look stores can get them and they are not expensive at all. Think like under $1000 for a set.
I look the look of them and most people do not know they are not factory.

Sent from my SM-N960U using Tapatalk

1fast ss · September 17, 2019

Added a Pop N Lock to my Silverado. Pretty easy install. Most difficult part was getting wiring tray cover out.

Imcrazy · September 17, 2019

6 hours ago, 1SLOW1500 said:

Who said lowered trucks on 24" can't do work 12 bags 16 blocks and still no rub and that is on lowest air bag pressure. Full air lifted it 2" more.
Air bags on all my trucks from now on.

Sent from my SM-N960U using Tapatalk

Good for you for doing work with your truck but, drop 2k # in the bed and see how the lowered suspension does.. Also come on man don't be afraid the let the blocks touch the spray in bed liner it's tough enough to handle it!

CajunFries · September 17, 2019

Who said lowered trucks on 24" can't do work 12 bags 16 blocks and still no rub and that is on lowest air bag pressure. Full air lifted it 2" more.
Air bags on all my trucks from now on.

Sent from my SM-N960U using Tapatalk

What bag setup are you using?

Sent from my iPhone using Tapatalk

1SLOW1500 · September 17, 2019

Firestone over leaf with the billet 1" bag spacer. In the pic the bag has the very lowest amount of air in it like 8lb but I can go to 30lb if needed and that lifts the rear little more then 3". Sonit can handle more but I would just hook up the trailer at that and have zero worries.
If it was stock height,lifted or towed more I would go with the 2500 or larger over axle bags.
Oh I also have NO overload leaf spring just 2 leafs. So with that in as most have I bet it would be even better.

Sent from my SM-N960U using Tapatalk

frizbal · September 17, 2019

Removed flapper and stock muffler and replaced with 40 series flowmaster. Resonator stayed on.

Not loud by any means, actually much quieter than I expected. But no drone inside and gave me slightly more rumble.

Sent from my iPhone using Tapatalk

CajunFries · September 17, 2019

Firestone over leaf with the billet 1" bag spacer. In the pic the bag has the very lowest amount of air in it like 8lb but I can go to 30lb if needed and that lifts the rear little more then 3". Sonit can handle more but I would just hook up the trailer at that and have zero worries.
If it was stock height,lifted or towed more I would go with the 2500 or larger over axle bags.
Oh I also have NO overload leaf spring just 2 leafs. So with that in as most have I bet it would be even better.

Sent from my SM-N960U using Tapatalk

Do you have part numbers by any chance?

I wanna go lower with my truck but I haul 2 bikes in the bed and a 7x16 trailer with 3 more bikes. And I always use my bags. I didn’t know there was an option for low low truck thanks

Sent from my iPhone using Tapatalk