What have you done to your K2 today?

tyler.frost92 · April 1, 2020

Installed 2.5 front king coilovers, dirt king Uniball upper control arms, dirt king locking cams and heavy duty bolts, king 2.5 rear reservoir shocks with compression adjusters and extended travel. Wheels are venomrex VR602 17x9 -12 wrapped in 285/70/17 ko2's
A24A383A-8F38-437A-8DE1-C65C460C16E5.tiff 3C10F237-88EF-43ED-AE6D-80496858CC22.tiff E5378A01-8DE8-4853-BCD2-B5CEAF4DF177.tiff

Realized when I posted this the pics were attachments instead of embedded. Oops.

Sent from my iPad using Tapatalk Pro

HeySkippyDog · April 1, 2020

Florida just went to a higher level of stay home, so I figured it was time to put the Bilstein 5100s in my truck that I bought a year ago.

Getting them into my 2014 was tricky, but I used 1 compressor to shorten it just enough to let the lower mount clear the LCA.

Fast forward to now, with my '17 and stamped UCAs. Damn, my old cheat doesn't work!

Fought and struggled with it all day then decided to pack it in and start again tomorrow.

Then it hits me.

All that damn time I was trying to get my old trick to work to reinstall.

All I need to do is disconnect the steering linkage and drop the nut from the upper ball joint. Connect the strut assembly, and then push the whole thing up with the jack and reinstall the linkage and the ball joint nut.

Sent from my SM-J810F using Tapatalk

CovetedStyle · April 2, 2020

Just finished up the intellectual property patent on these so I can post now. Took me a little time and my homies help with CAD but here is a one of set off face plates for the McGaughys lift traction bars and compression struts. Beveled with 45s to match the drop member face plate. Pretty juiced to see these cut in bulk next week!

GOMD · April 2, 2020

New wheels and tires.

Sean006 · April 4, 2020

Added the keypad today. It’s def a feature I missed from my f150. I’ll use it a lot
locks - unlocks and rolls down the windows

also lights up at night when pressed

Edited April 4, 2020 by Sean006

Jagerschnapps1 · April 4, 2020

This week I installed a new set of steps and color matched a used go rhino bumper I picked up on the cheap. I’m happy with the results.

dieselfan1 · April 4, 2020

On 4/1/2020 at 10:55 PM, CovetedStyle said:

Just finished up the intellectual property patent on these so I can post now. Took me a little time and my homies help with CAD but here is a one of set off face plates for the McGaughys lift traction bars and compression struts. Beveled with 45s to match the drop member face plate. Pretty juiced to see these cut in bulk next week!

What else you got up your sleeve? Those are show/sema worthy.

#yougotskills, #killerparts

CovetedStyle · April 5, 2020

1 hour ago, dieselfan1 said:

What else you got up your sleeve? Those are show/sema worthy.

#yougotskills, #killerparts

Appreciate it brother but it ain’t that big of a thing. Haha But hopefully a cool little accent to bring cemetery between the polish & copper in the wheels and these polished to the copper traction bars on the lift kit.

99silveradoz71 · April 5, 2020

Wash, clay, and ceramic to get her squared away now thatv better weather is here.

langston1726 · April 5, 2020

Had to get out of the house today. Stopped and snapped a few shots.

The wife’s ride

Sent from my iPhone using Tapatalk

tyler.frost92 · April 5, 2020

Did some light offroading and got a feel for the new suspension set up. Now just have to wait for our governor to reopen the sand dunes!

Sent from my iPad using Tapatalk Pro

langston1726 · April 5, 2020

Did some light offroading and got a feel for the new suspension set up. Now just have to wait for our governor to reopen the sand dunes!

Sent from my iPad using Tapatalk Pro

Nice truck man. Love all your mods so far. Is it a 6.2?

Sent from my iPhone using Tapatalk

tyler.frost92 · April 5, 2020

Nice truck man. Love all your mods so far. Is it a 6.2?

Sent from my iPhone using Tapatalk

Thanks. It is. Wishing I would have went a little bigger on tire size for these wheels. But for 600 dollars new with the stickers still on them I couldn’t pass the deal.

Sent from my iPhone using Tapatalk Pro

slide187 · April 5, 2020

Added the keypad today. It’s def a feature I missed from my f150. I’ll use it a lot
locks - unlocks and rolls down the windows
also lights up at night when pressed

I love these things, I wish more of the automakers would get on board with this idea. My work trucks are fords and it’s literally the only thing I like about them. [emoji1787][emoji1787]

So that’s just automotive taped on there tho right? And it’s wireless and basically acts like another fob? How hard was it to program?

Sent from my iPhone using Tapatalk