What have you done to your K2 today?

dieselfan1 · January 9, 2021

My one bucket has no dirt in it.
Both of yours do.
Proven.

Sent from my Pixel 3 using Tapatalk

Sean006 · January 9, 2021

Have the iPhone 12 Pro Max and my truck has no wireless charging

so did the mod to the armrest - (center lid indentation) bought the MagSafe charger and double sided tape - works great.

OffTheAir · January 10, 2021

Got smacked by a rock on my way home today, made a really nasty chip right in the center of the passenger door. Good news is, this kickstarted a nice little winter project. Gonna get some touch up materials, fix that, and I'm also going to be tackling some small areas of surface rust I've discovered under the tailgate and driver door-jam.

On a positive note, it's been precisely a year since I powder coated my chrome bumpers and replaced my OEM grill with a black one and no chips whatsoever!

JohnnyLane · January 10, 2021

10 hours ago, Sean006 said:

Have the iPhone 12 Pro Max and my truck has no wireless charging

so did the mod to the armrest - (center lid indentation) bought the MagSafe charger and double sided tape - works great.

Glad to see I’m not the only one after this setup. I did this to mine back in Nov, only I chose to conceal the cable through the rubber liner 90degrees down from the chargers output. I ran the wiring through the lid to a PD charger inside the center console that’s keyed to the ignition. I also 3m taped(w/ 3m adhesion promoter) for bonding, then added a trim ring to take away some of the “puck” look. Next time I have some clear coat mixed up I plan to paint the trim ring to match the plastic surround. To finish it off, I have a 3D textured 3m skin coming for the MagSafe charger that will match the leather of the console. I recommend the cplay2air module(I’ve got mine inside the glovebox) which will allow your CarPlay to work wirelessly while using this style setup.

Sean006 · January 10, 2021

7 hours ago, JohnnyLane said:

Glad to see I’m not the only one after this setup. I did this to mine back in Nov, only I chose to conceal the cable through the rubber liner 90degrees down from the chargers output. I ran the wiring through the lid to a PD charger inside the center console that’s keyed to the ignition. I also 3m taped(w/ 3m adhesion promoter) for bonding, then added a trim ring to take away some of the “puck” look. Next time I have some clear coat mixed up I plan to paint the trim ring to match the plastic surround. To finish it off, I have a 3D textured 3m skin coming for the MagSafe charger that will match the leather of the console. I recommend the cplay2air module(I’ve got mine inside the glovebox) which will allow your CarPlay to work wirelessly while using this style setup.

That looks way cleaner nice job

Where did you find the trim ring ?

the wire is already on my nerve so may update it soon

Edited January 10, 2021 by Sean006

Snowcamo · January 10, 2021

Preview. Coming along nicely. Will need to check fitment when installed.

Sent from my LM-G820 using Tapatalk

JohnnyLane · January 11, 2021

9 hours ago, Sean006 said:

That looks way cleaner nice job

Where did you find the trim ring ?

the wire is already on my nerve so may update it soon

Trim ring is from spigen.com. Black Friday deals had em for $10/ea.

PAPER · January 11, 2021

12 hours ago, Sean006 said:

That looks way cleaner nice job

Where did you find the trim ring ?

the wire is already on my nerve so may update it soon

$14.99 on Amazon

https://www.amazon.com/Spigen-Designed-MagSafe-Charger-Included/dp/B08LP8PSX7/ref=sr_1_1?dchild=1&keywords=magsafe+mag+fit&qid=1610334561&sr=8-1

boettcher40 · January 11, 2021

On 1/8/2021 at 9:40 PM, dieselfan1 said:

My one bucket has no dirt in it.
Both of yours do.
Proven.

Sent from my Pixel 3 using Tapatalk

Cyclone dirt traps from CG do wonders!

Frankielozano214 · January 11, 2021

Got my new REKLEZ uca’s installed, look good. But they didn’t set the struts to 9” so I gotta go back and have the adjust them!

new McGaughy struts

Reklez uca’s

need to move up not at the 9” mark

no way you can have a 7” lift with 37’s

Edited January 11, 2021 by Frankielozano214

PAPER · January 12, 2021

On 1/10/2021 at 6:51 AM, Sean006 said:

That looks way cleaner nice job

Where did you find the trim ring ?

the wire is already on my nerve so may update it soon

If you decide you want to go wireless Android Auto or Apple carplay . here is the link to a plug & play item .

I was told this is the Unit MVI use's without the $600 high mark up .

https://phoenixautomotiveinc.com/products/touch-portable-apple-carplay-android-auto-plc-h6?variant=32634064961582

lildann · January 13, 2021

If you decide you want to go wireless Android Auto or Apple carplay . here is the link to a plug & play item .
I was told this is the Unit MVI use's without the $600 high mark up .

https://phoenixautomotiveinc.com/products/touch-portable-apple-carplay-android-auto-plc-h6?variant=32634064961582

This looks cool. Can you give me more info on this? Are you using stock radio and screen? I’ve got a 2014 with Bose and navigation and am having a hard time wanting to spend the $700 plus the downtime of sending in my instrument cluster to have it programmed to have the steering wheel buttons work. Any pics of it’s menu and it working?

Sent from my iPhone using Tapatalk

PAPER · January 13, 2021

8 hours ago, lildann said:

This looks cool. Can you give me more info on this? Are you using stock radio and screen? I’ve got a 2014 with Bose and navigation and am having a hard time wanting to spend the $700 plus the downtime of sending in my instrument cluster to have it programmed to have the steering wheel buttons work. Any pics of it’s menu and it working?

Sent from my iPhone using Tapatalk

Sorry I don't own the unit . I saw it recently in someones truck @ a car function .

I noticed they were watching YouTube So I asked what he was using to stream .

He showed me the little black box plugged in & went through a few features

YouTube , Netflix , Google Play store . I asked him were he purchased it & he

gave me the link & he also said it was the same unit MVI uses & is selling for $600 .

But he got it for half that at the Link . Sorry forgot to mention his truck is a 2018

with Bose all stock besides rims .

Not sure why you mention your steering wheel buttons ???

This wont help you getting them to function ...

Edited January 13, 2021 by PAPER

slide187 · January 13, 2021

This looks cool. Can you give me more info on this? Are you using stock radio and screen? I’ve got a 2014 with Bose and navigation and am having a hard time wanting to spend the $700 plus the downtime of sending in my instrument cluster to have it programmed to have the steering wheel buttons work. Any pics of it’s menu and it working?

Sent from my iPhone using Tapatalk

That unit does not work with the stock radios. It is made for one of the Android based after market replacements like the ones Phoenix makes.

Sent from my iPhone using Tapatalk