What have you done to your K2 today?

[doubeleive]

On 3/28/2022 at 8:33 PM, 2018GMC said:

do you notice any road noise with those tires?, I tried some toyo open country and they are noisy as in all I can hear on the highway is rumrumrumrumrumrurm ugh, I guess if road noise does not bother you most people just tune it out, I cannot.

[2018GMC]

@doubeleive I’ve owned several sets of BFG KO and the KO2. They are very quiet for an aggressive all terrain but like all tires get noisy once they wear down to less than 50%. The noisiest tires I had were Cooper Discoverer ATP which is very similar to their AT3. They started out quiet but at 60% tread left they were extremely noisy on the highway. 

[2018GMC]

16 hours ago, M1ck3y said:

 

I just noticed something from your picture above. At the seam between the bumper and your passenger side quarter panel; kind of just to the side of your fog light. Can you stick your fingers through there; is it open to the fender? 

 

[CajunFries]

Added a Baja Design S1 pod to the hitch receiver hole. Wired it up to the reverse light. Forgot to take a picture in the day light. I’ll grab 1 tomorrow morning. It’s got a slight yellow hue to it compare to the other LEDs on the truck. 

[CajunFries]

https://mesocustoms.com/products/hitchpod-baja-s1-light-hitch-mount
 

with Baja design S1. 
 

if anyone is interested. 

[M1ck3y]

On 3/31/2022 at 10:25 AM, CajunFries said:

https://mesocustoms.com/products/hitchpod-baja-s1-light-hitch-mount
 

with Baja design S1. 
 

if anyone is interested. 

 

They need red 

[CajunFries]

5 hours ago, M1ck3y said:

 

They need red 

That would be nice actually! And now that I had this one for couple of days….. I’m not a fan of it. It’s too much in one spot and it just white out the middle of the screen…. Would be nice to have a red cover to swap it over to. 

[Ravenkeeper]

On 3/21/2022 at 10:54 AM, Ravenkeeper said:

Saturday, I did a few mods and started others.  
 

Completed:

- Painted XM Antenna swap 

- Tonneau Cover front end gap - plugged 

- CB Antenna back on truck

 

Started:

- Hidden Antenna install (unforeseen parts required)

- Dash Cam (wrong hardwire kit bundled with camera system, THX Amazon, rear camera umbilical connected)

- CB Antenna Coax into cab (in bed for now)

- Reverse Camera Display brightness mod (too bright at night, figuring out a way to release the pin from the connector)

 

During this week, finish the started mods. 
 

Next Saturday, CB/Scanner install. 
 

See my build album for “finished” pictures. 

(Saturday) Finished:

- Hidden Antenna install

- Dash Cam installation

 

During Hidden Antenna install, I noticed that I didn't connect the XM Antenna, so I did that.

 

Still need to finish:

- CB Antenna Coax into cab (in bed for now)

- Reverse Camera Display brightness mod (too bright at night, figuring out a way to release the pin from the connector)

- CB/Scanner install

Edited April 4, 2022 by Ravenkeeper

[M1ck3y]

On 4/4/2022 at 5:26 PM, Ravenkeeper said:

(Saturday) Finished:

- Hidden Antenna install

- Dash Cam installation

 

During Hidden Antenna install, I noticed that I didn't connect the XM Antenna, so I did that.

 

Still need to finish:

- CB Antenna Coax into cab (in bed for now)

- Reverse Camera Display brightness mod (too bright at night, figuring out a way to release the pin from the connector)

- CB/Scanner install

 

Wow, I can't even see it  

[slj2008]

15 hours ago, M1ck3y said:

 

Wow, I can't even see it  

What CB / Scanner did you get.

[slj2008]

On 4/4/2022 at 6:26 PM, Ravenkeeper said:

(Saturday) Finished:

- Hidden Antenna install

- Dash Cam installation

 

During Hidden Antenna install, I noticed that I didn't connect the XM Antenna, so I did that.

 

Still need to finish:

- CB Antenna Coax into cab (in bed for now)

- Reverse Camera Display brightness mod (too bright at night, figuring out a way to release the pin from the connector)

- CB/Scanner install

What CB / Scanner did you get. Thank's

[Ravenkeeper]

4 hours ago, slj2008 said:

What CB / Scanner did you get. Thank's

It's the same ones from 2015 (Picture if from my 2015).  Uniden PC122XL & Radio Shack (Realistic) Pro-2026.

 

As they (currently) sit in my garage.

Edited April 6, 2022 by Ravenkeeper

[slj2008]

14 hours ago, Ravenkeeper said:

It's the same ones from 2015 (Picture if from my 2015).  Uniden PC122XL & Radio Shack (Realistic) Pro-2026.

 

As they (currently) sit in my garage.

Thank You for the info

[Snowcamo]

I am working on a simular setup like the one in the pics. 8.5" mid bass in the front doors.

 

Anyone drill out the harness connectors to run wire? I have zero plans to continue to use the thin factory wiring. 

Edited April 8, 2022 by Snowcamo

[Crazykid38]

Installed the airaid jr kit, I love how it cleans up the engine bay.