Jump to content

Recommended Posts

Posted

 

Can you confirm that part fits 5.3L with trans cooler?

Yep. 5.3 and 6.2 use identical condenser / trans cooler. The V6s use part # 4282 which itself is identical to the V8 part, except it is missing the trans cooler portion.

Posted

is there anyway to tell if my condenser is going to be affected? any telltale signs?

Posted

is there anyway to tell if my condenser is going to be affected? any telltale signs?

The sign is either a "GMC" or bow tie on your grill.

  • Like 2
Posted

I just called about my case with chevy, the lady said that the part was on national backorder. I went into a whole lecture with the lady about why the demand was so high and that the original product was inferior on a $40,000 vehicle. I asked if her husband pulled up to take her out on a date in a truck with no ac would she be excited. She said one of her clients was still waiting for the part from march. I informed her that if I was still waiting from march, I would drive my truck back to the dealer, throw them my keys and demand my money back. I said if I am stuck with the $1400 repair this will be the last chevy I ever purchase.

Posted

Perhaps the question to ask the service advisor is how is GM going to fix this issue? Really it's not the service advicors fault and going off on them doesn't do much. Frankly I think GM should offer a goodwill repair for everyone up to 8 yr/100K miles. It's insulting to then charge those parts and labor after having to wait months for a part to be redesigned and produced.

 

I just called about my case with chevy, the lady said that the part was on national backorder. I went into a whole lecture with the lady about why the demand was so high and that the original product was inferior on a $40,000 vehicle. I asked if her husband pulled up to take her out on a date in a truck with no ac would she be excited. She said one of her clients was still waiting for the part from march. I informed her that if I was still waiting from march, I would drive my truck back to the dealer, throw them my keys and demand my money back. I said if I am stuck with the $1400 repair this will be the last chevy I ever purchase. [/size]

Posted

Perhaps the question to ask the service advisor is how is GM going to fix this issue? Really it's not the service advicors fault and going off on them doesn't do much. Frankly I think GM should offer a goodwill repair for everyone up to 8 yr/100K miles. It's insulting to then charge those parts and labor after having to wait months for a part to be redesigned and produced.

 

I told the lady that im not blaming her. She said t hat she would be upset too.

Posted

My 2016 silverado's ac just went out. Only 8,800 miles on it, had it for less than a year. Will be getting it fixed than trading the truck in. Already had the torque converter replaced last month.

Posted

My 2016 silverado's ac just went out. Only 8,800 miles on it, had it for less than a year. Will be getting it fixed than trading the truck in. Already had the torque converter replaced last month.

 

I'd trade it in now, you're going to be waiting a long time for the new condenser.

Posted

 

I'd trade it in now, you're going to be waiting a long time for the new condenser.

Yeah, I found a Ford dealership that also owns a Chevy dealership so they will buy it with it broken.

  • Like 1
Posted

Guys how long does it take to leak out if you fully recharge the system? If it is weeks why would you not just recharge it a couple of times and drive happy knowing that GM is redesigning the part and will have a part that will last the life of the vehicle soon? Now if it is a BIG leak and only lasts hours or a couple of days that would be a different situation. Just curious what size leak we are dealing with here????

Posted

I could fill mine up on Sunday and it would be ready for a recharge again on Wednesday night. I have good air now but who knows how long the aftermarket condenser will last?

Posted

Guys how long does it take to leak out if you fully recharge the system? If it is weeks why would you not just recharge it a couple of times and drive happy knowing that GM is redesigning the part and will have a part that will last the life of the vehicle soon? Now if it is a BIG leak and only lasts hours or a couple of days that would be a different situation. Just curious what size leak we are dealing with here????

 

It took about a week after they recharged it to fail again

Posted

depends how big the leak is. most of the time it's only a few days. There's also been problems with the lines coming out of the compressor. those are on backorder too.


depends how big the leak is. most of the time it's only a few days. There's also been problems with the lines coming out of the compressor. those are on backorder too.

Posted

This Wed my truck (2015 with 44k miles) starts blowing warm air. I've got an appt with the local dealership Thurs morning for an oil change (coupon is less than what I can buy oil and filter for) and an error message so timing is somewhat good. They tell me my condenser went out and and the bad new is it's nationally back-ordered and the good news is they have one. Cost is $1400 and they can get it done. A good buddy of mine has an Auto A/C shop and does all my work but it's frickin hot and humid in SW Florida so I just had the dealership do it. I'm too busy to run around and need the truck this weekend to pull the boat. Picked it up this morning and it's nice and cold again. If it happens again I'll look at an aftermarket one if time permits.

 

Still have my old 2005 Tahoe with 225k miles and the original condenser.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   1 Member, 0 Anonymous, 207 Guests (See full list)


  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...