Jump to content

Wireless charging

jrhoyt84
 Share

Recommended Posts

lapoolboy Senior Enthusiast

lapoolboy

Posted
Posted

Just for reference....recalls are reserved for issues that are deemed to potentially compromise safety.  Wireless charging hardly qualifies.

 

You can probably bark up the right tree long enough and loud enough to get GM to give you a module as a goodwill gesture.  I tried for a while and got tired of having to re-explain the issue to every single person I spoke to and they just kept referring to the "approved devices" list anyway.

 

I just spent the 100 bucks and bought my own module.  Been happily charging ever since!

  • Like 1
  • Replies 557
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Ed36rgz71
Ed36rgz71

Have S8+ with a case did this quick and easy just flip the rubber part and you're good to go    

8lugCT
8lugCT

Because the charger is positioned toward the back, and with the way the pad is, the bumper on the backside pushes the phone forward away from the charger. So reversing the mat allows the phone to be p

David Ulbrich
David Ulbrich

The 2018 works just fine with my iPhone X.  I just went to the dealership and tested it out.  I got the part number for the 2018 wireless charger module which is 13507652.  The parts guy said that it

Posted Images

pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Phil let me know when you have an adapter available again.
Whether I get a 2018 module out of pocket or under warranty this will definitely be replaced.
This should honestly be a recall for our trucks, very dishonest to advertise something and to become aware it isn't working and then even try to  cover it up with an "Approved Devices" list post date.

Mouser updated the Backorder status and now says they are backordered until May! I am on vacation on Thursday 2/22 - 2/28. When I get back, I am exploring an alternative method for a PnP harness.


Sent from my iPhone using Tapatalk
NorCalSLT Enthusiast

NorCalSLT

Posted
Posted (edited)
9 minutes ago, lapoolboy said:

Just for reference....recalls are reserved for issues that are deemed to potentially compromise safety.  Wireless charging hardly qualifies.

 

You can probably bark up the right tree long enough and loud enough to get GM to give you a module as a goodwill gesture.  I tried for a while and got tired of having to re-explain the issue to every single person I spoke to and they just kept referring to the "approved devices" list anyway.

 

I just spent the 100 bucks and bought my own module.  Been happily charging ever since!

You are right with regards to a safety recall, it should be a service bulletin to be specific.


Its not about the $100 to me. Its about the fact they sold brand new trucks with the wireless charging feature that was under-engineered by any wireless charging standard, Ive never seen a single coil in ANY wireless charger device, and used it as a modern selling point and then act like its not their problem and try to create deniability with some "approved devices" list over a year later. And they know that they were faulty, because the very next year are putting in standard 3 coil devices that work as they should rather than more single coil dogshit ones. Its got me more heated than the wonderful seats set to high setting in our trucks.

Edited by NorCalSLT
Havasubum Enthusiast

Havasubum

Posted
Posted

Just installed my 2018 charging module and wiring harness furnished by pgamboa.  Thanks to everyone for pointing me to this solution.  The charger works on my iPhone X like a champ even with the Otter Box Defender.

kittmaster Enthusiast

kittmaster

Posted
Posted

Hi All,

 

I signed up specifically to respond to this topic. I have an SLE '16 Yukon XL that didn't come with wireless charging. I have the service manuals for it and the connector that is use to connect the charge unit is not present. I seems I would need an upgraded harness to get the added connector. I hand verified that the connector is not present behind the rear trim console piece.

 

My question is, has anyone attempted to install into a truck that didn't have the OEM to start with and if so did it work and the charge bolt show up on the screen after the upgrade? I know the signal travels from the wireless module to the BCM to the HMI then to the display.

 

Thanks,

Chris

  • Like 1
jhbrennan Enthusiast

jhbrennan

Posted
Posted
14 minutes ago, Sidewayz said:

My module shipped today. Now to figure out the wiring harness

Me too - never thought the module would be here before the wiring harness - guess we just have to be patient with Phil and his suppliers.

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Me too - never thought the module would be here before the wiring harness - guess we just have to be patient with Phil and his suppliers.

Just one supplier... Mouser. Lol. I am on vacation tomorrow, but when I get back, I’ll be looking at a different mating connector elsewhere and will try to source that if it’s available.

I can make the Splice version now, Like i did when I first started this project.


Sent from my iPhone using Tapatalk
  • Thanks 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Hi All,
 
I signed up specifically to respond to this topic. I have an SLE '16 Yukon XL that didn't come with wireless charging. I have the service manuals for it and the connector that is use to connect the charge unit is not present. I seems I would need an upgraded harness to get the added connector. I hand verified that the connector is not present behind the rear trim console piece.
 
My question is, has anyone attempted to install into a truck that didn't have the OEM to start with and if so did it work and the charge bolt show up on the screen after the upgrade? I know the signal travels from the wireless module to the BCM to the HMI then to the display.
 
Thanks,
Chris

Chris,

I landed the charge indicator circuit (lightening bolt icon) into the BCM and it doesn’t show the icon on the radio when charging.

If you didn’t have wireless charging before, I am ask looking at a harness alternative to go inline to the rear cigarette light plug.

You can certainly add it. If you already have a center console, remove the main grey 42-pin plug at the front. Pin #7 is allocated for the charging matt power.


Sent from my iPhone using Tapatalk
BlkSS Enthusiast

BlkSS

Posted
Posted
34 minutes ago, pgamboa said:


Just one supplier... Mouser. Lol. I am on vacation tomorrow, but when I get back, I’ll be looking at a different mating connector elsewhere and will try to source that if it’s available.

I can make the Splice version now, Like i did when I first started this project.


Sent from my iPhone using Tapatalk

I recommend to everyone to just get the splice-in pigtail so you don't have to wait.  No one will ever tell and it works great.  Just takes a little more "work" it install.

20180121_173633.jpg

  • Like 1
Rob Okray Enthusiast

Rob Okray

Posted
Posted

This is one option my 2015 SLT does not have. If I order a module an get power to it, (tons of power in my console) will it fit under my lid?

MRL_Sierra16 Enthusiast

MRL_Sierra16

Posted
Posted (edited)

BlkSS - based on my experience and the fact that the vehicle still has a warranty, waiting for the proper pigtail makes switching back easy if needed.  Not to mention the ease of the switch over.  Was worth the wait for me.  YMMV.

Edited by MRL_Sierra16
  • Like 1
kittmaster Enthusiast

kittmaster

Posted
Posted
3 hours ago, pgamboa said:


Chris,

I landed the charge indicator circuit (lightening bolt icon) into the BCM and it doesn’t show the icon on the radio when charging.

If you didn’t have wireless charging before, I am ask looking at a harness alternative to go inline to the rear cigarette light plug.

You can certainly add it. If you already have a center console, remove the main grey 42-pin plug at the front. Pin #7 is allocated for the charging matt power.


Sent from my iPhone using Tapatalk

So the icon won't show even if the pin is grounded? I wonder if the BCM has programming that says to ignore it. I always figured to pick up 12v and ground from the lighter if I did an aftermarket version but the charge indicator is something I'd like to see work. I will review the connects you mentioned......have a safe vacation. Best, Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Shift to Park Message Warranty Claim

      By newdude · Posted

      Part is $233.87.     Not sure where $900 came from?  
    • PBNB
      Wiring Help, Please

      By PBNB · Posted

      Looks like you have it figured out. Did you run a sensor into the rear diff housing?    What sort of diff temp swings would you see towing or not? I have wondered how hot it can get 
    • tjonesdfw
      2021 with Intermittent AC Cooling Issues

      By tjonesdfw · Posted

      Dealer just confirmed that GM is "out of AC compressors."  Not sure if all 2019 to 2026 trucks use the same compressor, but a shortage like that is hard to believe.  
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      I think we're reaching the end of constant projects/work.   The water pump bolt appears to have self-sealed, as it's not leaking anymore. I'll take it, and, I'm ready should it self-unseal! I was also getting an oil leak at the front oil pan seal and timing cover and came to find a pan bolt on the corner wasn't even finger-tight. Too easy. And, it was. But, it appears tightening it has reduced a leak producing spots on the ground every time I parked, to just a weep, leaving an occasional dot on the cardboard that lives under it while parked. That's acceptable on a 30 year old engine in my book. I do hate leaks, but, replacing the pan seal is quite the job.   The rear washer line is reconnected and the sprayer works, although getting an intermittent washer fluid drip off the bottom. I think it's just residual...the reservoir filled up the channel in the rear floor and drained down into the upside-down spare tire/wheel. So there are residual puddles all over under there, will wait a few days for it to spill out and dry before I go chasing a potential leak.   The door speaker...no dice. Speaker works just fine, it's that channel in the factory amp that's gone bad. Can't win 'em all. And, whomever buys this will probably tear out the factory radio for something more modern anyway.   I put about 110 miles on it yesterday. Put a lot of wind and heat into it with some mountain driving. Still runs great. Near the top of the pass I got off on a gravel side road and put about 10 miles on with 4hi engaged. Works great.   If ya squint, she's mint! God I wish these were still in production. I can see why they're not. They're rudimentary bordering on agricultural. They began life as a pickup truck and then modern society demanded the rear be enclosed for kids and crap. They're still a pickup underneath, and that gives them lots of ride character, sway and bounce and bump steer. They're alive on the road, and, at least for purposes of nostalgia, it makes driving one a lot of fun.   The Check Engine light did come back on the pass, P0134 for the upstream O2 sensor dropping out. Putting heat into the exhaust causes it after about 10-15 seconds of increased load at higher RPM. The downstream sensor is completely mangled (someone clearly had a rough time removing it, but they didn't replace it?) so I'll just put two in it. For what, mostly to cure the CEL, I can tell the cat is damaged. It's not plugged or fractured, but it's not catalyzing. There's some guilt in not fixing it, but at a cost of $500+, the truck just won't get driven much under my watch. I dislike the smell...running the truck in the shop even with both doors open and the overhead fans blasting, I still reek of pre-cat exhaust. Sticks to clothing and everything else.   Window motor (I'm dreading this), and tires, and that should be about it. 50/50 on Starfire Solarus H/T's, or spending $20 more per tire and going with Cooper Discoverer RT's. I like the look of the RT's a lot more, but is it worth it? I've got a really good (just very old) Toyo Open Country XTX on there now and I like it.  
    • tjonesdfw
      Shift to Park Message Warranty Claim

      By tjonesdfw · Posted

      From what I've seen, they "could" sell the switch but designed the assembly such that the switch can't be readily removed and replaced without removing a plastic locating pin.  Sure appears aimed at forcing the end user to purchase a $900 shifter assembly instead of a $20 switch.  Thankfully I still have some extended warranty left...  this one has had warranty repairs almost every 5K miles from the day I bought it.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...