FHLH's 2016 Silverado CC LTZ Z71

Rally_18 · March 13, 2019

On 5/18/2018 at 2:13 PM, FHLH said:

Adding pics of the Go-Rhino D6 install...

Shipping damage pics and various installation pics.

Install was pretty straightforward and It took me an hour and 15 to perform the first side by myself. 45 minutes to do the other side since I had a process down. I'd imagine it would go much quicker with an extra set of hands. Also, each D6 is about 40lbs.

Thoughts: I like the look and the adjustability of the steps.

I would have preferred one more bracket per side (8 total instead of just 6) so I could utilize all the mounting locations the truck provides.

I really like the D6's im in the market for some boards to help others get in and out. These are what i want but i just hear everyone that gets them there damaged so im undecided

diyer2 · March 13, 2019

These are my favorite running boards.

Never slippery with the open design.

This design allows cleaning of snow, mud.

Solid designs hold snow mud underneath.

Get frame mount not rocker mounted.

https://www.luvernetruck.com/running-boards-side-steps/grip-step-7-inch

jgraves13 · March 14, 2019

I really like the D6's im in the market for some boards to help others get in and out. These are what i want but i just hear everyone that gets them there damaged so im undecided

Got mine from 4WP, Came packaged very well and not damaged. Love the steps

Sent from my iPhone using Tapatalk

FHLH · March 23, 2019

Really like this setup, but changes are coming

Sent from my iPhone using Tapatalk

FHLH · May 23, 2019

got my GM wheels powder coated. selling off the pro-comps

FHLH · June 18, 2019

Might as well post the finished product.

Here's a shot right before the wheel swap to the powder coated GM wheels

After

jgraves13 · June 19, 2019

Looks great! Do your steps contact the rocker panels anywhere or did you keep them far enough down to not rub?

Sent from my iPhone using Tapatalk

FHLH · June 19, 2019

Thanks.. no contact at all, about an inch between body and step

wasnt done, I got rid of the black door handles and mirror caps and replaced with silver.

FHLH · June 20, 2019

...and i wasn’t finished. I removed the flat black mirror caps and door handles and replaced with silver bits. Happy with the result. Will keep truck like it is for now as I plan on an new one in 6-12 months!

Sent from my iPhone using Tapatalk

jgraves13 · June 20, 2019

...and i wasn’t finished. I removed the flat black mirror caps and door handles and replaced with silver bits. Happy with the result. Will keep truck like it is for now as I plan on an new one in 6-12 months!

Sent from my iPhone using Tapatalk

2020 Silverado or something different? Why new?

Sent from my iPhone using Tapatalk

FHLH · June 20, 2019

2020 Silverado or something different? Why new?

Sent from my iPhone using Tapatalk

Boredom... but if I had purchased a 6.2, I’d probably keep it.

I’m leaning towards a Raptor, but the new AT4 w/ 6.2L is probably the more practical purchase. Have not ruled out a Ram PowerWagon either.... again, the AT4 is more practical.

Sent from my iPhone using Tapatalk

FHLH · June 24, 2019

And the party is over. The truck was stolen from my house between 10pm Thursday and 7am Friday morning.
OnStar texted me at 7:03 Friday am stating the vehicle might be stolen. Looked outside and sure enough, it was gone. Called OnStar and the HOUSTON police dept. OnStar could not locate the vehicle and as of this morning, they still cannot locate the vehicle. Working on the insurance part of this now. I may be back with a new AT4... who knows

Sent from my iPhone using Tapatalk

anbrumm · June 30, 2019

That's terrible to hear. I enjoyed your truck build. The Rhino D6s are what I want to add to my truck. Also considering the Falken Wildpeaks for my next set of tires.

Sent from my SM-N960U using Tapatalk