Jump to content

Recommended Posts

Posted
22 hours ago, Ay-Ay-Ron said:

Scrolling through this feed and I am intrigued by the idea of rolling down the windows using the unlock button on the fob as well as the ability to fold in your mirrors using the lock button on the fob.  I'm driving a 2018 Sierra and am not able to do either of these.  Do you know of a particular setting that i need to adjust or anything?

Here is the mirrors: Auto Mirror Folding
If equipped, with the ignition off,
press and hold Q on the RKE
transmitter for approximately
one second to automatically fold the
exterior mirrors. Press and hold K
on the RKE transmitter for
approximately one second to unfold.
See Remote Keyless Entry (RKE)
System Operation 0 37.
This feature is turned on or off
through vehicle personalization. See
Vehicle Personalization 0 160.
 

  • Like 1
Posted

Flipping through and havent seen this yet. It's nothing new seeing as my 04 Silverado had this, but when you lock your truck (with the horn enabled on the 2nd lock) and the horn doesn't sound that means a door isn't shut. My GF gives me crap for making the horn sound everytime I lock it, but a few times a door wasnt shut and the horn didnt blow so I knew something was wrong. Simple things make life easier.

  • Like 4
  • Thanks 1
Posted

Also lights won't flash if a door is open, that might please her.

Sent from my Moto Z2 Play using Tapatalk

  • Haha 1
Posted

I was never a fan of the "auto" setting on the 4WD selector, but for whatever reason I tried it today in the snow and ice here in Colorado. I flipped to the 'off-road' page of the DIC and noticed it said AWD, not 4WD, with all 4 tires in green. I didn't realize it's a whole different mode, assumed it would switch at will between 2WD and 4WD. It was quite nice to have that extra traction going down the road and not have to shift back to 2WD to enter a parking lot without binding up while turning.

  • Like 4
Posted

I have a buddy who's a GM mechanic and he told me not to drive around with it in AWD for extended periods.  I run mine just like you do here in Colorado on the roads when they're patchy.  My buddy said it locks the front hubs and senses slip and engages when necessary.  I still run in it AWD in those conditions.  If it's solid snow/ice it's in 4 wheel high.

Posted
21 minutes ago, parshal said:

I have a buddy who's a GM mechanic and he told me not to drive around with it in AWD for extended periods.  I run mine just like you do here in Colorado on the roads when they're patchy.  My buddy said it locks the front hubs and senses slip and engages when necessary.  I still run in it AWD in those conditions.  If it's solid snow/ice it's in 4 wheel high.

What is "extended periods"? 50 miles? All day? The winter months? I've heard that before and have always wondered. Because when its snowing in MN I throw it in Auto unless I'm on the lake or something. And put it in 2WD When the road clears 

Posted
34 minutes ago, parshal said:

I have a buddy who's a GM mechanic and he told me not to drive around with it in AWD for extended periods.  I run mine just like you do here in Colorado on the roads when they're patchy.  My buddy said it locks the front hubs and senses slip and engages when necessary.  I still run in it AWD in those conditions.  If it's solid snow/ice it's in 4 wheel high.

Yeah I've heard it's not the best for full time driving, which makes sense to me. I drove a 2WD Dodge Dakota for years out here and always managed thru snow and such, so mostly I just leave it in 2 and make do. Buuut, when it gets slippery and I'm in a hurry (this morning's commute) and I worry about the other genius drivers out there, knowing that I have that AWD option is nice.

Posted
34 minutes ago, parshal said:

I have a buddy who's a GM mechanic and he told me not to drive around with it in AWD for extended periods.  I run mine just like you do here in Colorado on the roads when they're patchy.  My buddy said it locks the front hubs and senses slip and engages when necessary.  I still run in it AWD in those conditions.  If it's solid snow/ice it's in 4 wheel high.

Still notable however that they never added anything to the owner’s manual about this. After decades of Auto 4x4 modes (aka: full time, AWD, etc) and vehicles that can't even be switched out of AWD, people still say "you shouldn’t drive around in AWD all the time, because...". 

   

Posted
1 minute ago, ftwhite said:

Still notable however that they never added anything to the owner’s manual about this. After decades of Auto 4x4 modes (aka: full time, AWD, etc) and vehicles that can't even be switched out of AWD, people still say "you shouldn’t drive around in AWD all the time, because...". 

   

My wife's Equinox was full time AWD with no way to turn it off.

Posted

My Ford Escape is full-time AWD drive, too.  I'm betting there's a difference in the way it works vs 4wd in a truck.  In other words, I bet the locked hubs on a true 4wd create more drag than a vehicle with true AWD.  I'm sure someone can explain it.

 

I do exactly as co-stark and ftwhite.  I use the full-time 4wd (which probably the correct term vs true AWD) when the roads are patchy.  I think my buddy meant don't leave it in full-time all the time.  Just use it temporarily as you would 4wd high.

Posted

Probably mentioned, but if you have the "all windows down" feature turned on with the keyfob, holding the unlock button to let the windows go down, if you let go as soon as they start to drop, the windows will stop at the point when they are going down, etc. I do it so my windows are just cracked to let fresh air in/let hot air out if I forget while in the truck  when I park.

 

  • Like 1
Posted
6 hours ago, parshal said:

My Ford Escape is full-time AWD drive, too.  I'm betting there's a difference in the way it works vs 4wd in a truck.  In other words, I bet the locked hubs on a true 4wd create more drag than a vehicle with true AWD.  I'm sure someone can explain it.

 

I do exactly as co-stark and ftwhite.  I use the full-time 4wd (which probably the correct term vs true AWD) when the roads are patchy.  I think my buddy meant don't leave it in full-time all the time.  Just use it temporarily as you would 4wd high.

Here is a good tech document on the tranfer case with an RPO of NQH:

https://www.evopower.ca/mrws/filedriver/MP3023_and_3024_Operation.pdf

Clearly states that the Auto4x4 is clutch based and can be used full time even on dry pavement. I only turn it off to save gas on longer drives. Even in the dead of summer, it works great for gravel drives and loose surfaces. I paid for it, so i use it. 

  • Like 3
Posted
19 hours ago, ftwhite said:

I paid for it, so i use it. 

This is the reason I dont buy used.

 

That article further enforces the reason why I dont use auto and why local GM dealerships stock transfercase clutches. Obviously the clutch isnt burnt out everytime you use it, but with the right spotty ice conditions they have worn out in under 120 miles. 

Posted
On 1/20/2019 at 3:09 PM, JimCost2014 said:

Here is the mirrors: Auto Mirror Folding
If equipped, with the ignition off,
press and hold Q on the RKE
transmitter for approximately
one second to automatically fold the
exterior mirrors. Press and hold K
on the RKE transmitter for
approximately one second to unfold.
See Remote Keyless Entry (RKE)
System Operation 0 37.
This feature is turned on or off
through vehicle personalization. See
Vehicle Personalization 0 160.
 

It Works! lol

Thanks for the info, functioning as described now.

Posted
9 minutes ago, Ay-Ay-Ron said:

It Works! lol

Thanks for the info, functioning as described now.

You are very welcome, did you get the windows figured out?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Paid $2.72 for E85 today.
    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...