Jump to content

2018 Silverado Auto Climate Control not working

Hudsoncc

By Hudsoncc
in Troubleshooting & Recalls

 Share

Recommended Posts

Hudsoncc New Member

Hudsoncc

Posted
Posted

Hello,

 

Last week I purchased a new 2018 Silverado LT Z71 double cab. Initially the climate control worked fine. However, while driving home today I noticed the fan would not turn on when in auto mode despite the cab temperature being in the 80's. Manual fan works fine and will blow cold AC but as soon as I press the auto button the fan turns off even with the temperature set in the high 60's - low 70's. The dealership service is booked out for several days and won't give me a loaner car unless the truck is undrivable. I'd rather not wait for the dealership. Anyone have any ideas? Truck has 650mi. I tried searching the forums but did not see this specific problem posted. 

IMG_20180728_195035.jpg

Mikey52 Enthusiast

Mikey52

Posted
Posted

Make sure in the settings the auto fan control is not set to low. In my 2018 the auto button just goes to the fan speed set in settings. I liked the way my 03 Yukon worked, would blow on high till temp reached then slow down to maintain temp. A step backwards from 2003.

 

 

I have a 2018 Denali so the programming may be different.

  • 1 month later...
joefeeyellow New Member

joefeeyellow

Posted
Posted
On 8/7/2018 at 5:12 PM, Hudsoncc said:

Hello,

 

Last week I purchased a new 2018 Silverado LT Z71 double cab. Initially the climate control worked fine. However, while driving home today I noticed the fan would not turn on when in auto mode despite the cab temperature being in the 80's. Manual fan works fine and will blow cold AC but as soon as I press the auto button the fan turns off even with the temperature set in the high 60's - low 70's. The dealership service is booked out for several days and won't give me a loaner car unless the truck is undrivable. I'd rather not wait for the dealership. Anyone have any ideas? Truck has 650mi. I tried searching the forums but did not see this specific problem posted. 

IMG_20180728_195035.jpg

I just had this same issue today.  My truck has 1200 miles on it.  Let me know what happens with you, I am going to the dealer tomorrow, although something tells me that won't be very beneficial.

Loco-diablo Senior Enthusiast

Loco-diablo

Posted
Posted
Make sure in the settings the auto fan control is not set to low. In my 2018 the auto button just goes to the fan speed set in settings. I liked the way my 03 Yukon worked, would blow on high till temp reached then slow down to maintain temp. A step backwards from 2003.
 
 
I have a 2018 Denali so the programming may be different.

This^


Sent from my iPhone using Tapatalk
  • 2 weeks later...
GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 8/7/2018 at 6:12 PM, Hudsoncc said:

Hello,

 

Last week I purchased a new 2018 Silverado LT Z71 double cab. Initially the climate control worked fine. However, while driving home today I noticed the fan would not turn on when in auto mode despite the cab temperature being in the 80's. Manual fan works fine and will blow cold AC but as soon as I press the auto button the fan turns off even with the temperature set in the high 60's - low 70's. The dealership service is booked out for several days and won't give me a loaner car unless the truck is undrivable. I'd rather not wait for the dealership. Anyone have any ideas? Truck has 650mi. I tried searching the forums but did not see this specific problem posted. 

IMG_20180728_195035.jpg

Thank you for bringing this to our attention, Hudsoncc. Congratulations on picking up a new Silverado! We understand how important it is for you to have a positive vehicle ownership experience. If you’re considering visiting your servicing GM dealership, we would be happy to work alongside them, to determine the root cause of your Silverado’s automatic climate control. Feel free to send us a private message, if you need an additional layer of support.

 

Anthony J.

  • 11 months later...
djdonte New Member

djdonte

Posted
Posted (edited)
On ‎8‎/‎7‎/‎2018 at 5:12 PM, Hudsoncc said:

Hello,

 

Last week I purchased a new 2018 Silverado LT Z71 double cab. Initially the climate control worked fine. However, while driving home today I noticed the fan would not turn on when in auto mode despite the cab temperature being in the 80's. Manual fan works fine and will blow cold AC but as soon as I press the auto button the fan turns off even with the temperature set in the high 60's - low 70's. The dealership service is booked out for several days and won't give me a loaner car unless the truck is undrivable. I'd rather not wait for the dealership. Anyone have any ideas? Truck has 650mi. I tried searching the forums but did not see this specific problem posted. 

IMG_20180728_195035.jpg

Let me know what comes of this. My car is at the dealer right now for this EXACT same issue for the second time. First time they said they couldn't reproduce the issue so they threw a blower motor in it. A few weeks later it happened again. Weird thing is its totally random, and restarting the car will not fix it, but of course letting it sit will fix the problem. My car has 18K miles.

Edited by djdonte
djdonte New Member

djdonte

Posted
Posted

Service advisor actually just called me right now. He said they could not get it to act up, but there was a past stored code for the left side temp sensor so they went ahead and replaced it. We will see...

  • 3 months later...
BlaineBug Enthusiast

BlaineBug

Posted
Posted

Reviving an old topic......

I have my auto fan speed set to "low" in the settings and it still functions.

 

There is a little bit of a difference between low, medium, and high, so set it to what you wish.  I have always been under the impression that a lower air velocity, blowing heat for a longer period of time, gives a more comfortable and even temperature overall.

If it isn't blowing at all then obviously something was wrong.

  • 5 months later...
budfixesit Enthusiast

budfixesit

Posted
Posted

I'm sorry to drag up an old post, but was there ever a resolution to this? I bought a used 18 Texas Edition about 10 days ago. 45K miles, very nice ride! a couple of days ago this exact issue popped up on mine. It is currently at the dealer and it is acting up, but they seem to be stumped. I love the truck, and have always owned Chevy trucks, and have always gotten my moneys worth. Any insight or knowledge gained would be a great help. Thanks Y'all!

carnau Enthusiast

carnau

Posted
Posted
41 minutes ago, budfixesit said:

I'm sorry to drag up an old post, but was there ever a resolution to this? I bought a used 18 Texas Edition about 10 days ago. 45K miles, very nice ride! a couple of days ago this exact issue popped up on mine. It is currently at the dealer and it is acting up, but they seem to be stumped. I love the truck, and have always owned Chevy trucks, and have always gotten my moneys worth. Any insight or knowledge gained would be a great help. Thanks Y'all!

Yeah, it was in the post lol. You need to do a logic lock reset. Remove the battery cables and let them sit off for longer than 5 minutes. Remove both cables. If you don't want to wait the 5 minutes you can hold both of the battery cables together for 30 seconds (with them both off the battery) and it will do the same thing as waiting longer than 5 minutes with the cables disconnected. What you are trying to accomplish is depleting the capacitors. 

budfixesit Enthusiast

budfixesit

Posted
Posted

Thank You carnau! I am pretty familiar with logic locks from my work. Makes me wish I had thought of this before taking it in. I am curious as to what they will find though. I am willing to let it ride because the repair will cost me nothing and i have a loaner, We will see. I will endeavor to respond to this post with the resolution. Thank you again!

budfixesit Enthusiast

budfixesit

Posted
Posted

Got a call from my Service Writer. He tells me that the truck has a bad expansion valve, As someone who has been in the HVAC business my entire life ( to this point anyway) i can't see how an expansion valve can cause this issue, as it has nothing to do with the fan. I'm thinking he meant an expansion module, like an add-on that turned regular climate control into dual zone with auto. Of course, no part until Monday so we will see. Updates as events unfold. Happy fourth to y'all and Happy Birthday, America!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Hdwrguy
      2027 Chevrolet Silverado: Official Discussion

      By Hdwrguy · Posted

      So after reading the reveal from Chevrolet, I kept asking myself...why did the trim levels change?   Here are the official ones:   Work Truck (WT): The quintessential fleet truck, built with durable, easy-to-clean interiors for commercial or utilitarian use. Custom: A stylish, road-oriented trim that adds a more refined appearance, standard dual exhaust, and modern exterior styling. Custom Trail Boss: An entry-level off-roader featuring a 2-inch factory suspension lift and 34-inch mud-terrain tires on a budget. Silverado: Serving as the new base consumer truck (replacing the previous LT trim), it comes standard with the Z71 off-road package when equipped with 4WD. Trail Boss: Steps up the off-road hardware with the 2-inch lift, 34-inch tires, monotube shocks, an exclusive off-road hood, and more premium interior options. ZR2: The flagship off-roader. It boasts 35-inch mud-terrain tires, Multimatic DSSV dampers, front and rear electronic lockers, forged carbon-fiber interior accents, and an available hardcore Bison Edition (co-developed with AEV). High Country: The pinnacle of luxury. It replaces bright chrome with modern satin chrome, 22-inch wheels, premium leather, real wood interior trim, a panoramic sunroof, and an exclusive front-passenger touchscreen. As others have stated, why would you want a Silverado - 'Silverado' - wth?? LT needs to remain!!!   Also, there will no longer be a dedicated Z71 model.  All 4x4 trucks will have the Z71 package. Carplay is also something that cannot be removed.  Hopefully it will remain.     I am excited about the 5.7L V8 (350 C.I.D.)  Old school Chevy power.  My only concern is whatever version of AFM/DFM cylinder deactivation.  Too bad that isn't an option a buyer can choose to have or not.   I will definitely be stopping by my local dealership when these trucks start showing up.
    • richard wysong
      Gas Prices

      By richard wysong · Posted

      I haven't seen diesel for less than $5.30 anywhere in my area
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      The not as clean as one would assume theme with the new engine oil, that reminds me of comments over the years with mechanics not always being so on board with filling an oil filter, not from the center anyway due to that typically being the clean side of the filter, danger of some contaminant falling into the filter if not careful but the realization now that the oil may not be as pure as one had assumed it would surely be. Yes it would be possible to fill from the small holes but that means messing with something to prop open the anti drain back valve if the filter is so equipped and not damage that valve in the process. Me, I have hardly ever prefilled an engine oil filter however I have prefilled diesel fuel filters with a filter on a fuel bulk tank and for anyone that has messed with diesel engines with filters and units that have a limited or no way of priming them, putting on a dry filter is a bad day to say the least with those crappy systems. But anyway back to not so clean engine oil, indeed perhaps its not so bad after all that I have not made a practice of prefilling oil filters.    As Grumpy Bear commented on keeping things clean, that I really have to wonder what the typical practice is at a dealer or any other shop that changes engine oil, do they make sure to wipe or wash off the oil plug and certainly if it fell into some gunk or onto a dirty floor, or that they wiped the filter mounting flange and didn't go and use some dirty rag and end up adding dirt to the inside of the head of the filter mount. Or be careless in how they stored or handled the new filter and if they were bumping into items under the vehicle with the filter opening facing up and having dirt drop right into the filter and if so right into the threaded center that is on the clean side. The top side, did they clean away the built up gunk that may be around the filler before removing the cap or to be really careful at that point that something right close to the filler hole that was hidden under the caps flange won't fall into the engine. Or did they clean the funnel or was that just laying there covered in oil from the oil change before and dust kicked up from sweeping the floor stuck to the oil and now that will go running into the next persons engine due to just not cleaning the funnel as "they won't know anyway" attitude as that young guy is more worried about taking a break so he can go outside and smoke a joint. Just random points that came to mind when I think about what some hired personnel may do that the shop foreman has no idea of or perhaps the whole attitude of some shops may be "eh ... who cares, they will never know the difference anyway".  
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      $3.69 for 87 octane.   $4.24 for Diesel in town.
    • Atlas
      OCI, not when but why?

      By Atlas · Posted

      On the subject of OLM, Gm's OLM tool may be more "informed" than others brands. I recall OLM's in mid-2000's Chrysler products literally counting down a set number of miles. That's all the OLM appeared to be.    I would actually expect GM to be able to explain the parameters that their OLM takes into account from a high level. No, I would not expect them to disclose their software coding or data analysis around their parameters.   So we're talking about two different topics, so to continue the subject on the other one, I'd be curious to know how much "standard particulate matter" in fresh oil is able to be filtered at first start by a fresh oil filter. How much particulate matter is enough to "matter"?   I.e. how much of a "lever" do we think this equates to (variability in particulate content, in fresh oils, between different makes/brands, some which filter less, and some that filter more).   We can say that more particles = more wear = shorter engine life as a logical statement and use that data with a little marketing to scare people into selecting a more refined/filtered oil. Using a similie, is this like deciding to forego two alcoholic drinks in a lifetime because we're worried about the potential impact on lifespan? Are there numbers which translate the ISO test results into a quantifiable increase in wear for a given engine/use case?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...