Jump to content

Recommended Posts

  • 3 weeks later...
Posted

The beat goes on.  The original repairs held together for our road trip to Oregon, pulling a 27' travel trailer, but there was a loud repetitive clicking noise at idle, like the sound of the fan solenoid cycling on and off.  That stopped after about 10 days, but was replaced by a cloud of white exhaust at startup.  I returned the truck to the dealer yesterday, and, get this, there's now a coolant leak in the head gasket on the opposite side of the engine from where the pushrod and lifters were replaced.  And, of course, the f'ing head gasket is on nationwide backorder!  So once again, travel plans for one week from today are held hostage by GM corporate bullshit, over-managing parts inventories.  I love this truck, but I hate these problems and GM's inability to provide anything resembling timely warranty repair service.

Posted (edited)
1 hour ago, Dean "Deano" Rappleye said:

The beat goes on.  The original repairs held together for our road trip to Oregon, pulling a 27' travel trailer, but there was a loud repetitive clicking noise at idle, like the sound of the fan solenoid cycling on and off.  That stopped after about 10 days, but was replaced by a cloud of white exhaust at startup.  I returned the truck to the dealer yesterday, and, get this, there's now a coolant leak in the head gasket on the opposite side of the engine from where the pushrod and lifters were replaced.  And, of course, the f'ing head gasket is on nationwide backorder!  So once again, travel plans for one week from today are held hostage by GM corporate bullshit, over-managing parts inventories.  I love this truck, but I hate these problems and GM's inability to provide anything resembling timely warranty repair service.

Have you opened a claim with GM yet, just in case you pursue the truck being bought back/lemon law?

 

If not, do so and raise hell to at least get a truck to drive for your vacation.

 

Just remember, if you throw the Lemon Law threat out there first, they will call your bluff and tell you to go ahead and file with the state and get a attorney.

 

Buy back, or trade allowance will work a lot better.

Edited by JimCost2014
Posted

The lemon law in Washington State provides for arbitration for the first 30 months after delivery...my vehicle is beyond that point.  As for a replacement truck, the last time (the pushrod and lifter replacement) they were willing to provide a rental at their expense PROVIDED THAT THE RENTAL WAS A GM PRODUCT.  At the time, the local rental outlets had no suitable GM vehicles available, so their offer was like giving me the sleeves from their vest.

Posted

I have two L86 head gaskets for sell in the classified section for 80 bucks.  This would mean you would have to buy them but your truck could be back on the road.

 

Just went through this back order when I did my cam swap and DOD delete.  So I have an extra set from TSP.

Posted
21 minutes ago, Dean "Deano" Rappleye said:

The lemon law in Washington State provides for arbitration for the first 30 months after delivery...my vehicle is beyond that point.  As for a replacement truck, the last time (the pushrod and lifter replacement) they were willing to provide a rental at their expense PROVIDED THAT THE RENTAL WAS A GM PRODUCT.  At the time, the local rental outlets had no suitable GM vehicles available, so their offer was like giving me the sleeves from their vest.

Is it the dealership providing the loaners, or GM itself.

 

I would be on the phone (time permitting) with Chevy customer service letting them know what is going on, and that you are not happy.

 

This is speaking from experience with both a trade allowance (my 14) and a full buy out/back (my 16) which had a broken push rod, and then multiple problems with the brand new replacement engine.

  • 3 weeks later...
Posted
On 6/29/2019 at 11:33 AM, Dean "Deano" Rappleye said:

Hi...I'm new to this forum and hope you guys can help me with your experiences.  My 2015 Silverado LTZ with 6.2l engine developed the dreaded bent pushrod at 26k miles.  It's at the dealer now, has been since last Wednesday (it's Saturday now).  I called them yesterday for an ETA on repairs and they told me that it could take several weeks due to a shortage of pushrods!  They went on to say that GM had zero of them in stock, and there are only two dealers in the entire US that have one each, which are probably spoken for, for a customer's repair.  Sounds like bullshit, but that's what they told me.  It seems to me that they're still building these motors, so they should certainly have pushrods, and should make them available for warranty customers at least.

 

The truck being my third vehicle, ordinarily the wait time would be irritating but tolerable, BUT I have vacation plans in less than two weeks that will involve pulling my 27' travel trailer for a thousand miles or so.  I have deposits and reservations at a dozen RV parks, and we will be caravaning with friends.

 

So, my question to you is: What remedies, if any, can I expect from GM under these circumstances?  Is there anything in the warranty about taking a reasonable time for repairs?  Can I expect a replacement vehicle for repair jobs of long duration?  If there are no replacement vehicles, can I expect compensation for a rental?  If none of these are available, can I sue to recapture the cost of renting a replacement tow vehicle?

ok so there was a nation back order of parts for the engines, head gaskets, etc etc and it has trickled into alot of other models and parts. what the dealer has told you is the truth. i had to wait 3.5 weeks to get a steering gear for a warranty replacement on a truck. the truck sat on the lot til i go one in through parts. 

 

alot of dealerships will give you a loaner vehicle if you prefer , but typically they ask you dont go out of state with it or what have you. these are retired at 4000 miles and sold on lot as demos 

 

if you chose to get a rental on your own and you request gm to reimburse you for it, just keep all paper work. and fight it with gm. 

  • 5 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...