Jump to content

Recommended Posts

Posted
On 10/25/2020 at 1:08 PM, dram1983361 said:

Concept one CS.6 22x9.5 +35 offset

Arturo trailblade XT  305/45/22

Supreme suspension 1" bottom mount lift spacers

Supreme suspension 1.5" (38mm) hub/wheel centric wheel spacers

Belltech drop shackles @2" +2* shims

Shuttle changes

 

The spacers push the offset out to -3mm and I have minimal rubbing, no splash guard mod(yet)

IMG_20201022_135858.jpg

IMG_20201016_184718.jpg

Also, Have you had any issues with the wheel spacers?

Posted
22 minutes ago, Cantrell said:

Have you had any trouble with the spacers?  

Not really any issues, but I took them off because they created too much offset with the new wheels. I like the tire to be just about flush with the fender, so 0mm is perfect imo. As long as you install them properly you shouldn’t have any issues. I ran the same spacers in my Tacoma for 2 + years. 

Posted

2020 Silverado 1500 LTZ ~ Z71 w/ 3.0 Duramax

Nitto Ridge Grappler 285/65R20 127 Q Tire

Stock 20" LTZ Wheels

Rough Country 3.5" Suspension Lift Kit w/ Lifted Struts and V2 Monotube Shocks

ReadyLift 15-3485 1/2" Hub Centric Wheel Spacer (front only to prevent rub on control arms)

 

Notes:  

  • Tire PSI set to 45 as per Nitto recommendation.
  • Rough Country lift is not level.  Measurement from ground to top of fender well is 40.75" in the front and 41.75" in the rear.
  • No rubbing.

 

 

 

2020-10-26 13.48.51.jpg

2020-10-26 13.49.09.jpg

2020-10-26 13.49.03.jpg

  • Like 1
Posted
Fuel Vapor 20x10
Nitto Ridge Grappler 35x12.5
4” Zone suspension lift on top of factory TB 2” for a total of 6”
 
minor trimming of the wheel well 
CB4B2EE3-147A-4427-9978-D6438A6182A7.thumb.jpeg.7e8fa6acc52e9be551e0fd2744a0bece.jpeg
F60D335C-CC93-46D0-B2E8-54F7BD871E64.thumb.jpeg.9a7e769dafd5d79f985465eb4d445962.jpeg
453E6584-BAB1-4E2B-80CE-77A8151FFDBD.thumb.jpeg.6b7352107a3aec2c88ec7825db0fdcd4.jpeg

That is the exact setup I am looking for. How do you like that lift so far? Looks great!


Sent from my iPhone using Tapatalk
Posted
6 hours ago, Cantrell said:

Also, Have you had any issues with the wheel spacers?

None, everything is as smooth as before installing them and nice and tight (red lock Tite) after a month

Posted
On 8/31/2020 at 11:12 AM, osumason said:

I will be going with either the Venomrex 601 

Wheel Specs
Size: 20X9.0
Offset: 0 (Chevy/GMC/Dodge)
Backspacing: 5.0" (Chevy/GMC/Dodge)
 

 

Or the Black Rhino Shrapnel

20x9.5

Offset 12

 

 

Just FYI for future searches...The Venomrex with the 0 offset will rub with with a 285/60 20 tire.  I should have went with a 55 profile...

Posted

Ready lift level kit 1.75” with upper control arms. Cali off-road 22x12 -51 offset. 33x12.5 Toyo MTs. Borla Atak exhaust. 3/8” inch spacers on the front. won’t let me attach any pics 

Posted
On 9/13/2020 at 8:44 AM, Jgreene11 said:

Could you have run those Icons up to 3”? Just curious, looks awesome though. Do u have any more pics, side profile? I bet rides like butter 

supposed to be able to go up to 3.5" i believe. for some reason when i was adjusting the pre load it stopped on the driver side and was just spinning. i couldve gone more with the passenger side but obviously i wasnt going to. i havent researched this issue or contacted icon because its right where i wanted it to be. yes rides fantastic and is awesome off road. have a rub at full lock going over a curb or when braking. now im trying to find fender flares because the winter roads in montana have been brutal to the body.  getting it washed today ill upload a pic when im done. sorry for the late response!

Posted

Anyone know of these will fit the T1 trucks?

6a8aab4739f015bfc374e8dbef82c3dc.jpg


Ryan B.

Posted
SCA black widow wheels 
 
33” x 12.5 ridge grapplers 
 
 
627A09D3-FEAD-4580-B13D-F9DE49E8AE36.thumb.jpeg.ae2a8a120e10132c569767905d7aff89.jpeg

That is one good looking wheel/truck.


Sent from my iPad using Tapatalk
Posted

Does anyone know when the 20" black rims for the 2021 Trail Boss will be available? I saw it was late availibilty, whatever that means. Really prefer the 20's over the 18's and but don't want to wait to order and miss the rebates. Looking to do the 1.5" RC level, 1" taller rear block, 275/65r20 Nittos upgrade right when I get it.

Posted

2019 GMC Sierra SLT 

 

3.5” Rough Country Lift (Front 3.5” lifted struts no spacers and UCAs)

 

4Play 4P70 22x10 -18 offset

33x12.50x22 Toyo Open Country AT3

 

Did a Mini NorCal on the front fender to clear the tires on the outside. Have plenty of room on the inside. 

2A38E8C0-821D-4584-B46E-88663CD1399D.jpeg

916BE199-A8D8-42EA-A343-43ECC6B1FD29.jpeg

704B93F5-C483-45EA-A1BD-6CF6C3096B32.jpeg

815CD142-4416-4A3C-ABBD-C56601BA0E00.jpeg

Posted

20x10 Hardrock Affliction-19

295/60r20 Toyo RT

2.5 Motofab front 2 spacer in back 

Removed bracket behind mud flap, and trimmed mud flap. 

7E830A96-E900-49B1-9553-43F0C5727D85.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
    • Yes your absolutely right, I been looking at the 4 inch BDS one and it acutely states you can use the stock 20’s just not the 17’s or 18’s, I also didn’t realize that with my 275/60r20 stock wheels I’m already running 33 inch diameter wheel setup lol so I can just run my stock wheels and tires atleast to start.
    • I would expect that to be lift-kit dependent.  If the kit has interference issues w stock wheels, then the kit/manufacturer should indicate that somewhere.
    • That’s what I’m wondering is if the stock backspacing of the factory wheels will clear new upper control arms and such  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...