Jump to content

Recommended Posts

Posted
On 9/25/2020 at 6:42 AM, T.han90 said:

Let me know what they say because All of the above is what mine is doing plus auto stop has stopped working too 

Well took it in and they were confused Saturday’s is usually for oil changes only so than why did you schedule me today?.... they’ll look at it Monday and diagnose it they think it’s more complex than just a battery issue they want to keep it for the day and go over it all

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Posted

So, the shop has had mine for 2 days and as you can expect nothing has been found as of yet. They say batteries tested good, cables pass resistance test and all cables are tight. Mechanic is periodically going by truck and remote starting. None of the symptoms have happened since jumping it off. They are saying it possibly went through reset. They are keeping it tell Tuesday and will let y’all know more then.

Posted
On 9/26/2020 at 9:11 AM, T.han90 said:

Well took it in and they were confused Saturday’s is usually for oil changes only so than why did you schedule me today?.... they’ll look at it Monday and diagnose it they think it’s more complex than just a battery issue they want to keep it for the day and go over it all

Welp went to go start it today and won’t start dead battery and every service message you can think of popped up 

Posted (edited)
20 minutes ago, T.han90 said:

Welp went to go start it today and won’t start dead battery and every service message you can think of popped up 

Take pictures to show service Dept. I wish I would have taken pics and video to show them. Is your Silverado a 2500HD?

Edited by MJK
Wrong info
Posted
20 minutes ago, MJK said:

Take pictures to show service Dept. I wish I would have taken pics and video to show them. Is your Silverado a 2500HD?

Wish I could’ve nothing wants to pop up now it’s a dead brick in driveway, 2020 1500 rst 4800 miles on it. Keep reading UBEC bolts not tight enough has been the issue for a lot of people with electrical issues 

Posted
On 9/25/2020 at 5:42 AM, T.han90 said:

Let me know what they say because All of the above is what mine is doing plus auto stop has stopped working too 

So I picked up my truck today after it being in the shop for 6 days. They did an update that was to fix the black screen after remote start. It seems to be fixed.They thought that the USB port was faulty because I had a problem with Apple CarPlay not working. So it was changed out and still have a problem with the Radio recognizing my phone. They plugged a test device into the port and still no recognition. I need the truck tell next Wednesday and will bring back in for them to call and work with Tech support. Mechanic believes it is the radio. It will also show phone is connected by Bluetooth and will not play media even though phone says it is. Will check back in next week.

Posted
31 minutes ago, MJK said:

So I picked up my truck today after it being in the shop for 6 days. They did an update that was to fix the black screen after remote start. It seems to be fixed.They thought that the USB port was faulty because I had a problem with Apple CarPlay not working. So it was changed out and still have a problem with the Radio recognizing my phone. They plugged a test device into the port and still no recognition. I need the truck tell next Wednesday and will bring back in for them to call and work with Tech support. Mechanic believes it is the radio. It will also show phone is connected by Bluetooth and will not play media even though phone says it is. Will check back in next week.

interesting, I get mine back tomorrow it’s been in since Monday they said it was a bad module and that there is a new recent update said they updated the system too.

Posted

My screen went black after remote starting a few weeks ago. Once I shut off and restarted the screen returned to normal. No other issues at the time. Haven't driven my truck in a week. Went out to start the truck and nothing. Tried to jump start it and nothing but clicking. Going to give the dealer a call in the AM.

Posted
53 minutes ago, 1fast ss said:

My screen went black after remote starting a few weeks ago. Once I shut off and restarted the screen returned to normal. No other issues at the time. Haven't driven my truck in a week. Went out to start the truck and nothing. Tried to jump start it and nothing but clicking. Going to give the dealer a call in the AM.

There is a recent update for this issue.

  • Like 1
Posted
On 10/6/2020 at 8:57 PM, MJK said:

There is a recent update for this issue.

Hopefully, I get my truck back tomorrow. Dealership told me they completed a software update and everything checks out fine. They want to keep it overnight to make sure. I hope the problem is solved.

  • 2 months later...
Posted

I had my 2020 2500HD HC in for oil change and the next morning after remote start, the infotainment would not come on.  The infotainment used to come on when on ACC or engine start from the ignition, but would not any more.  I called the dealership and two "Master Technicians"  stated this is how it is supposed to work.  According to them, you have to shut the truck off and start it from the ignition to get the infotainment system to come on.  

So, after being tongue-lashed by the dealership, I decided to reset the truck by pulling the negative terminals and low and behold, the infotainment comes on without turning off the truck now.    "Master Mechanics" can't know everything, but this back-yard shade-tree mechanic go to move on all electronic issues is pull the battery.  I hope the rumored upcoming update fixes these glitches for good.

  • 4 weeks later...
Posted

Having the same issue with my 2020 3500. Have an appointment tomorrow morning will hopefully get it all fixed before work on Tuesday will let you guys know what they say. Thanks for all the info it has helped a lot. 

Posted

Two days after my truck was parked wouldn’t start. Boosted it and drive it to dealer. Took them three hours to figure out what you guys all told me. Updated from version 148 to V150. Seems to be working great now. My advice is if this happens to you before you let truck sit ensure you have restarted manually or will die. Thanks again everyone. 

Posted
9 hours ago, Berta403 said:

Two days after my truck was parked wouldn’t start. Boosted it and drive it to dealer. Took them three hours to figure out what you guys all told me. Updated from version 148 to V150. Seems to be working great now. My advice is if this happens to you before you let truck sit ensure you have restarted manually or will die. Thanks again everyone. 

i wonder if this  is the new update that is supposed to be over the air that seems like nobody has gotten yet

Posted
4 hours ago, kylant said:

i wonder if this  is the new update that is supposed to be over the air that seems like nobody has gotten yet

I’m not sure but it should if it’s causing this many issues. Took them 3 hours following  gms procedures before getting to the update. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...